Canon ImagePROGRAF W6200 Bedienungsanleitung

AY3-4308-002

OCT. 2003



2003 CANON INC. CANON W6200 N 1003 0.00-0 PRINTED IN JAPAN (IMPRIME AU JAPON)

REVISION 0

1003 N 0.00-0

Target Readers

This manual is published by Canon Inc. for qualified persons and contains the necessary

technical information for technical theory, installation, maintenance, and repair of

products. This manual covers all localities where the products are sold. For this reason, it

may contain information that does not apply to your locality.

Revisions

This manual may include technical inaccuracies or typographical errors due to

improvements or changes in the products. When amendments are made to the content of

this manual, Canon will issue technical information as the need arises. In the event of

major alterations to the content of this manual over a long or short period, Canon will

publish a revised version of the manual.

The following paragraph does not apply to any countries where such provisions are

inconsistent with local law.

Trademarks

The product names and company names appearing in this manual are the registered

trademarks or trademarks of the individual companies.

manual may not be copied, reproduced, or translated into other languages, in whole or in

part, without the express written consent of Canon Inc. except in the case of internal

business use.

CANON INC.

L Printer Quality Support Division

16-1, Shimonoge 3-chome, Takatsu-ku, Kawasaki-shi, Kanagawa 213-8512, Japan

This manual was produced on an Apple®Power Macintosh®G3 personal computer and

Canon LASER SHOT LBP-730PS laser beam printer; final pages were printed on Genasett

3100Q.

All logos graphics were produced with MACROMEDIA FREEHAND7.0J.

All documents and all page layouts were created with QuarkXPress3.3J.

I. ABOUT THIS MANUAL

This manual is divided into five parts containing the information required for

servicing the W8200 printer.

Part 1: Safety and Precautions

This part contains information on how to service the unit safety. It is very

important, and must be read.

Part 2: Product Specifications

This part outlines the product and its specifications.

Part 3: Operating Instructions

This part explains how to operate the unit properly, how it is installed, and how

to use the service mode.

Part 4: Technical Reference

This part outlines the unit operation giving a technically.

Part 5: Maintenance

This part explains maintenance of the unit. It includes details of disassembly /

assembly, adjustments required when assembling, troubleshooting procedures, and

wiring / circuit diagrams, etc.

This manual does not contain complete information required for

disassembling and assembling the printer. Please also refer to the

separate Parts Catalog.

REF.

II. TABLE OF CONTENTS

Page Part 1: SAFETY AND PRECAUTIONS

1 - 1 1. SAFETY PRECAUTIONS

1 - 1 1.1 Moving Parts

1 - 2 1.2 Ink

1 - 2 1.2.1 Ink passages

1 - 4 1.2.2 Ink mist

1 - 5 1.3 Electrical Parts

1 - 6 2. OTHER PRECAUTIONS

1 - 6 2.1 Printhead

1 - 6 2.1.1 How to handle the printhead

1 - 7 2.1.2 Capping

1 - 7 2.1.3 When the printer is not used for a long time

1 - 7 2.1.4 Conductivity of ink

1 - 8 2.2 Ink Tank

1 - 8 2.2.1 Opening the ink tank

1 - 8 2.2.2 Handling the ink tank

1 - 9 2.3 Handling the Printer

1 - 9 2.3.1 Precautions against static electricity

1 -10 2.3.2 Fixing the carriage

1 -11 2.3.3 Replacing the maintenance cartridge

1 -11 2.3.4 Refilling the ink

1 -12 3. PRECAUTIONS WHEN SERVICING THE PRINTER

1 -12 3.1 Stored Data

1 -13 3.2 Firmware Confirmation

1 -13 3.3 Precautions Against Static Electricity

1 -13 3.4 Precautions for Disassembly/Assembly

1 -13 3.5 Self-Diagnostic Feature

1 -13 3.6 Disposing of Waste Ink

1 -13 3.7 Disposing of Lithium Battery

Part 2: PRODUCT SPECIFICATIONS

2 - 1 1. PRODUCT OVERVIEW

2 - 1 1.1 Product Overview

2 - 2 1.2 Features

2 - 3 1.3 Printhead

2 - 3 1.4 Ink Tank

2 - 4 1.5 Cutter Unit

2 - 4 1.6 Roll Holder

2 - 5 1.7 Consumables

2 - 5 1.7.1 Printhead

2 - 5 1.7.2 Ink tank

2 - 5 1.7.3 Cutter unit

2 - 6 2. SPECIFICATIONS

2 - 6 2.1 General Specifications

2 -10 2.2 Interface Specifications

2 -10 2.2.1 Network

2 -11 2.2.2 USB (option)

2 -12 2.2.3 IEEE1394 (option)

2 -13 2.3 Printer Driver Types

2 -13 2.3.1 Printer driver

2 -13 2.3.2 Printer utility

Page Part 3: OPERATING INSTRUCTIONS

3 - 1 1. NAMES AND FUNCTIONS OF COMPONENTS

3 - 1 1.1 Names and Functions of Components

3 - 1 1.1.1 Front

3 - 2 1.1.2 Rear

3 - 2 1.1.3 Carriage unit

3 - 3 1.1.4 Internal part

3 - 4 2. TRANSPORTING THE PRINTER

3 - 4 2.1 Transporting the Printer

3 - 5 2.1.1 Moving the printer on the same floor

3 - 6 2.1.2 How to transport the printer to a different floor

3 - 8 2.1.3 Manual capping

3 - 9 2.2 Reinstalling the Printer

3 - 9 2.2.1 Installing the printer on the same floor

3 - 9 2.2.2 Installing the printer on a different floor

3 -10 3. OPERATION

3 -10 3.1 Operation Panel

3 -12 3.2 Change of Printer Status

3 -13 3.3 Main Menu

3 -13 3.3.1 Main menu operations

3 -14 3.3.2 Map of the main menu

3 -18 3.3.3 Contents of main menu

3 -24 4. PRINTER SERVICING FUNCTIONS

3 -24 4.1 Service Mode

3 -24 4.1.1 Service mode operation

3 -25 4.1.2 Map of the service mode

3 -28 4.1.3 Details of service mode

3 -39 4.2 Error Indicators

3 -40 4.2.1 Overview of warning and error codes

3 -41 4.2.2 Warning and error codes

3 -44 4.2.3 Description of warning and error codes

3 -50 5. PRINTER SPECIAL MODE

3 -50 5.1 Controller Replace Mode

3 -50 5.2 Download Mode

3 -51 6. PRINTER SERVICE SOFTWARE

3 -51 6.1 Overview of Service Software

3 -51 6.1.1 Firmware updating tool

3 -51 6.1.2 Firmware recovery tool

3 -51 6.1.3 Service information access software

3 -52 6.2 Firmware Updating Tool

3 -52 6.3 Firmware Recovery Tool of the System Controller

3 -52 6.3.1 Firmware recovery procedure

3 -56 6.4 Service Information Access Software

3 -59 6.4.1 Service information access procedure

Part 4: TECHNICAL REFERENCE

4 - 1 1. OVERVIEW

4 - 1 1.1 Printer Block Diagram

4 - 2 1.2 Print Signal Sequence

4 - 5 1.3 Print Driving

4 - 5 1.3.1 Print drive control

4 - 6 1.3.2 Print drive timing

4 - 7 2. FIRMWARE

4 - 7 2.1 Power On/Off

4 - 7 2.1.1 Power On

III

Page

4 - 8 2.2 Power Off

4 - 8 2.2.1 Power Off sequence

4 - 9 2.3 Print Control

4 - 9 2.3.1 Print mode

4 -10 2.4 Print Position Adjustment

4 -10 2.4.1 Print position adjustment

4 -11 2.5 Overheating Protection Control of Printhead

4 -11 2.6 Pause between Pages

4 -11 2.7 White Raster Skip

4 -11 2.8 Sleep Mode

4 -13 3. PRINTER MECHANICAL SYSTEM

4 -14 3.1 Ink Passage

4 -14 3.1.1 Overview of the ink passage

4 -16 3.2 Ink Tank Unit

4 -16 3.2.1 Structure of ink tank unit

4 -18 3.3 Carriage Unit

4 -18 3.3.1 Carriage functions

4 -19 3.3.2 Structure of carriage

4 -22 3.4 Printhead

4 -22 3.4.1 Structure of printhead

4 -26 3.5 Purge Unit

4 -26 3.5.1 Functions of purge unit

4 -28 3.5.2 Structure of purge unit

4 -31 3.6 Maintenance Cartridge

4 -31 3.6.1 Maintenance cartridge

4 -32 3.7 Air Flow

4 -32 3.7.1 Air flow

4 -33 3.8 Paper Path

4 -33 3.8.1 Overview of paper path

4 -37 3.9 Structure of Paper Path

4 -37 3.9.1 Structure of feed rollers

4 -38 3.9.2 Structure of cutter unit

4 -39 4. PRINTER ELECTRICAL SYSTEM

4 -39 4.1 Overview

4 -41 4.2 System Controller

4 -41 4.2.1 System controller components

4 -44 4.3 Engine Controller

4 -44 4.3.1 Engine controller components

4 -48 4.4 Carriage Relay PCB

4 -48 4.4.1 Carriage relay PCB components

4 -49 4.5 Head Relay PCB

4 -49 4.5.1 Head relay PCB components

4 -50 4.6 Power Supply

4 -50 4.6.1 Power supply block diagram

4 -51 5. DETECTION FUNCTIONS

4 -51 5.1 Detection Functions Based on Sensors

4 -51 5.1.1 Sensors for covers

4 -53 5.1.2 Ink passage system

4 -56 5.1.3 Carriage system

4 -58 5.1.4 Paper path system

Page Part 5: MAINTENANCE

5 - 1 1. MAINTENANCE

5 - 1 1.1 List of Regular Replacement Parts

5 - 1 1.2 List of Consumables

5 - 1 1.3 List of Regular Maintenance

5 - 2 2. SERVICE TOOLS

5 - 2 2.1 List of Tools

5 - 3 2.2 Using the Cover Switch Tool

5 - 4 3. APPLYING THE GREASE

5 - 6 4. SERVICE PARTS

5 - 6 4.1 Service Parts

5 - 6 4.1.1 Keep all packages with the warning not to turn over.

5 - 6 4.1.2 Feed roller

5 - 7 5. DISASSEMBLY/REASSEMBLY

5 - 7 5.1 Disassembly/Reassembly

5 - 8 5.1.1 Disassembly/assembly flowcharts for major parts

5 -10 5.2 Points to Note on Disassembly and Reassembly

5 -10 5.2.1 Note on locations prohibited from disassembly

5 -11 5.2.2 Manual carriage movement

5 -12 5.2.3 Units required for draining the ink

5 -13 5.2.4 Outer covers

5 -19 5.2.5 Driving unit

5 -20 5.2.6 Ink tube unit

5 -25 5.2.7 Carriage unit

5 -30 5.2.8 Feeder unit

5 -31 5.2.9 Purge unit

5 -32 5.2.10 Ink tank unit

5 -33 5.2.11 Boards

5 -36 5.3 Opening the Caps and Moving the Wiper Unit

5 -36 5.3.1 Opening the caps and releasing the carriage lock pins

5 -37 5.3.2 Retracting the cap

5 -38 5.3.3 Moving the wiper unit

5 -38 5.4 Opening and Closing the Ink Supply Valve

5 -39 5.5 Draining the Ink

5 -39 5.5.1 Automatic ink drainage

5 -39 5.5.2 Manual ink drainage

5 -43 6. ADJUSTMENT AND SETUP

5 -43 6.1 Adjustment and Setup Items

5 -43 6.1.1 Adjustment of head holder tilt lever

5 -43 6.2 Adjustment and Setup Procedures

5 -43 6.2.1 Adjustment of the head holder tilt lever

5 -44 7. TROUBLESHOOTING

5 -44 7.1 Outline of Troubleshooting

5 -44 7.1.1 Outline

5 -44 7.1.2 Notice for Troubleshooting

5 -45 7.2 Troubleshooting When Warnings Occur

5 -45 7.2.1 Ink Check

(W01000, W01001, W01002, W01003, W01004, W01005)

5 -45 7.2.2 MTCart Full Soon

(W01006)

5 -46 7.2.3 Memory Overflow

(W0100C)

5 -46 7.2.4 Feed Limit..

(W0100F)

5 -46 7.2.5 Incorrect Media

(W01021)

Page

5 -47 7.2.6 No full bleed

(W01022)

5 -47 7.2.7 W01030/W01031/W01032/W01033/W01034/W01035/W01036/

W01037/W01038/W01039: GARO W0103x (number is indicated by x)

5 -48 7.3 Troubleshooting When Errors Occur

5 -48 7.3.1 E02000

Roll media end error

5 -48 7.3.2 E0200D/E02016

Cut sheet end error

5 -49 7.3.3

E0200A/E0200B/E0200C/E0200E/E0200F/E02010/E02017/E02018

Media sensor error

5 -50 7.3.4 E02015

Cutter error

5 -50 7.3.5 E02400/E02401/E02402/E02403

Path mismatch error

5 -51 7.3.6 E02404/E02405

Borderless printing error

5 -51 7.3.7 E02500/E02501/E02502/E02503/E02504/E02505

Ink empty error

5 -52 7.3.8 E02506/E02507/E02508/E02509/E0250A/E0250B

Ink tank uninstalled error (during ink tank replacement)

5 -53 7.3.9 E02520

Ink level unknown error

5 -53 7.3.10 E02521/E02522/E02523/E02524/E02525/E02526

Ink level low error

5 -54 7.3.11 E02800/E02801/E02802/E02803/E02811

Printhead error

5 -54 7.3.12 E02804/E02805/E02806/E02807/E02808/E02809/E0280A/

E0280B/E0280C/E0280D/E0280E/E0280F

Ink tank error

5 -55 7.3.13 E02812/E02A00/E02A01/E02A02/E02A03

Engine controller internal error

5 -55 7.3.14 E02815/E02816/E02817/E02818

Maintenance cartridge error

5 -56 7.3.15 E02B04

Upper cover sensor error

5 -56 7.3.16 E02B05

Right cover sensor error

5 -57 7.3.17 E02B06

Carriage cover sensor error

5 -57 7.3.18 E02D00/E02D01

Sensor error in purge unit

5 -58 7.3.19 E02D02

Carriage homeposition error

5 -58 7.3.20 E02D03

Feed motor error

5 -59 7.3.21 E02D05

Air flow fan error

5 -59 7.3.22 E02D06

Ink supply valve switching error

5 -60 7.3.23 E02E01/E02E05/E02E06

Carriage motor error

5 -61 7.3.24 E02E10

IEEE1394 error

Andere Handbücher für imagePROGRAF W6200

Inhaltsverzeichnis

Andere Canon Drucker Handbücher

Canon

Canon PIXMA MX894 Bedienungsanleitung

Canon

Canon CP-100 Bedienungsanleitung

Canon

Canon Pixma MX885 Bedienungsanleitung

Canon

Canon BJC-S9000 Handbuch

Canon

Canon imageRUNNER ADVANCE Bedienungsanleitung

Canon

Canon SELPHY CP1000 Bedienungsanleitung

Canon

Canon PIXMA MG5270 Bedienungsanleitung

Canon

Canon BJC-4000 Bedienungsanleitung

Canon

Canon S9000 Bedienungsanleitung

Canon

Canon MB2720 Bedienungsanleitung

Canon

Canon LBP352 Bedienungsanleitung

Canon

Canon i550 Bedienungsanleitung

Canon

Canon LBP-1260 Bedienungsanleitung

Canon

Canon imageRUNNER 330S Bedienungsanleitung

Canon

Canon PIXMA MG8170 Bedienungsanleitung

Canon

Canon SELPHY CP770 Konfigurationshandbuch

Canon

Canon iPF710 - imagePROGRAF Color Inkjet Printer Bedienungsanleitung

Canon

Canon CLC 3220 Montage- und Wartungsanleitung

Canon

Canon imageRUNNER 1643iF Bedienungsanleitung

Canon

Canon MultiPASS C530 Bedienungsanleitung

Canon

Canon Color Bubble Jet BJC-8200 Bedienungsanleitung

Canon

Canon TS3100 Series Bedienungsanleitung

Canon

Canon CP-200 Bedienungsanleitung

Canon

Canon imageCLASS LBP237dw Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

IRA3D

IRA3D POETRY4 Bedienungsanleitung

Ricoh

Ricoh Aficio AP400 Bedienungsanleitung

BIXOLON

BIXOLON SRP-352plusV Bedienungsanleitung

Epson

Epson Stylus Photo PX700W Montageanleitung

Ricoh

Ricoh SP204SF Bedienungsanleitung

Star Micronics

Star Micronics futurePRNT TSP100 Bedienungsanleitung

Epson

Epson TM-TM88V-i Gebrauchs- und Pflegehandbuch

Canon imagePROGRAF W6200 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken