Canon IMAGERUNNER ADVANCE C5051 Bedienungsanleitung
0-2
0-2
Application
This manual has been issued by Canon Inc. for qualied persons to learn technical theory,
installation, maintenance, and repair of products. This manual covers all localities where the
products are sold. For this reason, there may be information in this manual that does not
apply to your locality.
Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements
or changes in products. When changes occur in applicable products or in the contents of this
manual, Canon will release technical information as the need arises. In the event of major
changes in the contents of this manual over a long or short period, Canon will issue a new
edition of this manual.
The following paragraph does not apply to any countries where such provisions are
inconsistent with local law.
Trademarks
The product names and company names used in this manual are the registered trademarks
of the individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may
not be copied, reproduced or translated into another language, in whole or in part, without the
written consent of Canon Inc.
(C) CANON INC. 2009
Caution
Use of this manual should be strictly supervised to avoid disclosure of condential
information.
fin
0-3
0-3
Explanation of Symbols
The following symbols are used throughout this Service Manual.
Symbols Explanation Symbols Explanation
Check. Remove the claw.
Check visually. Insert the claw.
Check the noise. Use the bundled part.
Disconnect the connector. Push the part.
Connect the connector. Plug the power cable.
Remove the cable/wire
from the cable guide or wire
saddle. Turn on the power.
Set the cable/wire to the
cable guide or wire saddle.
Remove the screw.
Tighten the screw.
F-0-1F-0-1 F-0-2F-0-2
F-0-3F-0-3 -0-4-0-4
F 0-5F 0-5 -0-6-0-6
F 0-7F 0-7 0-80-8
0-90-9 F 0-10F 0-10
0-110-11 F-0-12F-0-12
0-130-13
0-140-14
F-0-15F-0-15
The following rules apply throughout this Service Manual:
1. Each chapter contains sections explaining the purpose of specic functions and the
relationship between electrical and mechanical systems with reference to the timing of
operation.
In the diagrams, represents the path of mechanical drive; where a signal name
accompanies the symbol, the arrow indicates the direction of the electric
signal.
The expression "turn on the power" means ipping on the power switch, closing the
front door, and closing the delivery unit door, which results in supplying the machine with
power.
2. In the digital circuits, '1' is used to indicate that the voltage level of a given signal is
"High", while '0' is used to indicate "Low". (The voltage value, however, differs from
circuit to circuit.) In addition, the asterisk (*) as in "DRMD*" indicates that the DRMD
signal goes on when '0'.
In practically all cases, the internal mechanisms of a microprocessor cannot be checked
in the eld. Therefore, the operations of the microprocessors used in the machines
are not discussed: they are explained in terms of from sensors to the input of the DC
controller PCB and from the output of the DC controller PCB to the loads.
The descriptions in this Service Manual are subject to change without notice for product
improvement or other purposes, and major changes will be communicated in the form of
Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this Service
Manual and all relevant Service Information bulletins and be able to identify and isolate faults
in the machine.
fin
0
0-2
0-2
CDRH Act
The Center for Devices and Radiological Health of the US Food and Drum Administration put
into force regulations concerning laser products on August 2, 1976. These regulations apply
to laser products manufactured on and after August 1, 1976, and the sale of laser products
not certied under the regulations is banned within the Untied States. The label shown here
indicates compliance with the CDRH regulations, and its attachment is required on all laser
products that are soled in the United States.
CANON INC.
MANUFACTURED:
30-2,SHIMOMARUKO,3-CHOME,OHTA-KU,TOKYO,JAPAN
THIS PRODUCT CONHORMS WITH DHHS RADIATION
PERFORMANCE STANDARD 21CFR CHAPTER 1
SUBCHAPTER J.
A different description may be used for a different product.
Laser Safety
Laser beam radiation may pose a danger to the human body. A laser scanner mounted on the
machine is sealed with the protection housing and external cover to prevent the laser beam
from leaking to the outside. The laser beam never leaks out of the scanner as far as users
operate the machine normally.
F-0-16F-0-16
Handling of Laser System
When servicing the area around the laser assembly, be sure to turn off the main power.
The machine's covers that can reect laser light are identied by means of a warning label
(Figure). If you must detach a cover showing the label, be sure to take extra caution during
the work.
F-0-17F-0-17
fin
4
4
Parts Replacement and Cleaning
Main Controller
Laser Exposure System
Image Formation System
Fixing System
Pickup Feed System
Option
■
■
■
■
■
■
■List of Parts
fineline6
5
5
Adjustment
Main Controller
■
fineline6
Andere Handbücher für IMAGERUNNER ADVANCE C5051
11
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Canon Drucker Handbücher
Canon
Canon PIXMA MX420 Series Gebrauchsanweisung
Canon
Canon iPF605 - imagePROGRAF Color Inkjet Printer Technisches Handbuch
Canon
Canon iPF655 - imagePROGRAF Color Inkjet Printer Bedienungsanleitung
Canon
Canon Pixma Pro9500 Series Handbuch
Canon
Canon iP5200R - PIXMA Color Inkjet Printer Bedienungsanleitung
Canon
Canon PIXMA MG2140 Bedienungsanleitung
Canon
Canon TS7400 Series Bedienungsanleitung
Canon
Canon imageCLASS MF3010 Sicherheitsleitfaden
Canon
Canon G500 Series Einrichtungshandbuch
Canon
Canon Color imageCLASS MF8350Cdn Sicherheitsleitfaden
Canon
Canon i560 Series Konfigurationshandbuch
Canon
Canon Color imageRUNNER LBP5360 Bedienungsanleitung
Canon
Canon Satera LBP-5600 Bedienungsanleitung
Canon
Canon imageCLASS MF273dw Bedienungsanleitung
Canon
Canon PIXMA MG2220 Bedienungsanleitung
Canon
Canon imageCLASS MF5850dn Service-Handbuch
Canon
Canon iRC3380 Leitfaden
Canon
Canon PIXMA MX700 Series Bedienungsanleitung
Canon
Canon GX5070 Einrichtungshandbuch
Canon
Canon iPF710 - imagePROGRAF Color Inkjet Printer Bedienungsanleitung
