Canon iR ADVANCE 500 Series Bedienungsanleitung
321
Network (Advanced Box / Space Client)
iR ADVANCE 500/400 Series
Service Manual
April 24, 2013
Revision 0
Functional Overview
Specications
Installation/Settings
Application
This manual has been issued by Canon Inc. for qualied persons to learn technical theory,
installation, maintenance, and repair of products. This manual covers all localities where the
products are sold. For this reason, there may be information in this manual that does not
apply to your locality.
Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements
or changes in products. When changes occur in applicable products or in the contents of this
manual, Canon will release technical information as the need arises. In the event of major
changes in the contents of this manual over a long or short period, Canon will issue a new
edition of this manual.
The following paragraph does not apply to any countries where such provisions are
inconsistent with local law.
Trademarks
The product names and company names used in this manual are the registered trademarks
of the individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may
not be copied, reproduced or translated into another language, in whole or in part, without the
consent of Canon Inc.
© CANON INC. 2013
Caution
Use of this manual should be strictly supervised to avoid disclosure of condential
information.
Explanation of Symbols
The following symbols are used throughout this Service Manual.
Symbols Explanation Symbols Explanation
Check. Remove the claw.
Check visually. Insert the claw.
Check the noise. Use the bundled part.
Disconnect the connector. Push the part.
Connect the connector. Plug the power cable.
Remove the cable/wire
from the cable guide or wire
saddle.
Turn on the power.
Set the cable/wire to the
cable guide or wire saddle.
Remove the screw.
Tighten the screw.
The following rules apply throughout this Service Manual:
1. Each chapter contains sections explaining the purpose of specic functions and the
relationship between electrical and mechanical systems with reference to the timing of
operation.
In the diagrams, represents the path of mechanical drive; where a signal
name accompanies the symbol, the arrow indicates the direction of the
electric signal.
The expression "turn on the power" means ipping on the power switch, closing the
front door, and closing the delivery unit door, which results in supplying the machine with
power.
2. In the digital circuits, '1' is used to indicate that the voltage level of a given signal is
"High", while '0' is used to indicate "Low". (The voltage value, however, differs from
circuit to circuit.) In addition, the asterisk (*) as in "DRMD*" indicates that the DRMD
signal goes on when '0'.
In practically all cases, the internal mechanisms of a microprocessor cannot be checked
in the eld. Therefore, the operations of the microprocessors used in the machines
are not discussed: they are explained in terms of from sensors to the input of the DC
controller PCB and from the output of the DC controller PCB to the loads.
The descriptions in this Service Manual are subject to change without notice for product
improvement or other purposes, and major changes will be communicated in the form of
Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this Service
Manual and all relevant Service Information bulletins and be able to identify and isolate faults
in the machine.
Contents
Functional Overview
Functional Overview ----------------------------------------------------------1-2
Outline of Network (Advanced Box/Space Client) ------------------------- 1-2
Network ------------------------------------------------------------------------------- 1-2
Note -------------------------------------------------------------------------------------------- 1-2
File format ------------------------------------------------------------------------------------ 1-3
Memory Media ---------------------------------------------------------------------- 1-4
File Format ----------------------------------------------------------------------------------- 1-4
Note -------------------------------------------------------------------------------------------- 1-4
Specications
Specications ------------------------------------------------------------------2-2
Specications in Dept. ID management -------------------------------------- 2-2
Specications regarding link to Memory Media ---------------------------- 2-2
Installation/Settings
Installation/Settings -----------------------------------------------------------3-2
Save to network (external connection setting)------------------------------ 3-2
Settings for Server ----------------------------------------------------------------- 3-2
Open to Public ------------------------------------------------------------------------------- 3-2
SMB Authentication Settings------------------------------------------------------------- 3-2
Allow to Create Personal Space -------------------------------------------------------- 3-3
Authentication Management ------------------------------------------------------------- 3-3
Disabling writing from external device/PC -------------------------------------------- 3-4
Settings for client ------------------------------------------------------------------- 3-5
Protocol settings ---------------------------------------------------------------------------- 3-5
Network settings ---------------------------------------------------------------------------- 3-5
1
1
1-2
1-2
Functional Overview > Functional Overview > Network > Note
Functional Overview > Functional Overview > Network > Note
Functional Overview
Outline of Network (Advanced Box/Space Client)
The Advanced Box is an inner storage function with the iR device that was newly added from
the iR-ADV C5051 series in addition to the User Box. With the iR ADVANCE 500/400 Series,
the 2 types of storage areas are used and the user can scan and save the document as well
as use the saved le.
• Network
• Memory Media
Network
The network indicates the HDD (Advanced Box) of the other imageRUNNER ADVANCE
series on the network that is accessible from this product.
By selecting the Advanced Box of the other imageRUNNER ADVANCE series from [Network],
the document retrieved from this product can be saved in the Advanced Box of the other
imageRUNNER ADVANCE series and the le in the Advanced Box can be printed from this
product.
The user also can see and print the data saved in the Advanced Box (Network) of the other
imageRUNNER ADVANCE series.
At the Flash model, this network function (Advanced Box/Space Client) is available with the
HDD or SEND option.
F-1-1
■Note
• Direct Print Kit (for PDF/XPS) is necessary to use the following functions.
• To preview an PDF le/XPS le
• To print an PDF le/XPS le
• To print an Encrypted PDF le
• To print an PolicyPDF le
• Mail Box is not available.
• Files cannot be stored in the iR ADVANCE 500/400 Series.
They can only be saved in the HDD of the other imageRUNNER ADVANCE Series server
machine.
• SMB or WebDAV “Open to Public” is required for the server Advanced Box.
• With the iR ADVANCE 500/400 Series are only connected with SMB/WebDAV as clients
F-1-2
1
1
1-3
1-3
Functional Overview > Functional Overview > Network > File format
Functional Overview > Functional Overview > Network > File format
■File format
Icons displaying le types handled by the network are as follows.
F-1-3
1
1
1-4
1-4
Functional Overview > Functional Overview > Memory Media > Note
Functional Overview > Functional Overview > Memory Media > Note
Memory Media
Memory Media is a storage location that can be used by connecting a USB memory to the
USB port of this machine. The original read from this machine can be saved in the memory
media in a le format that can be used by the computer (such as PDF) and the le saved in
the memory media can be printed from this machine.
■File Format
Icons displaying le types handled by Memory Media are as follows.
F-1-4
F-1-5
■Note
• Only no security media are available.
• There are no capacity limit on memory media. But the limit on ies till 2GB.
2
2
2-2
2-2
Specications > Specications > Specications regarding link to Memory Media
Specications > Specications > Specications regarding link to Memory Media
Specications
Specications in Dept. ID management
• To manage Advanced Box/ Advanced Space with Dept. ID, select ON for “Main Box” in
“Limited Functions” setting.
Set “Store/Access Files, Fax/I-Fax Inbox” On, in the case of iR ADVANCE 500/400 Series.
Path:
Management Settings User Management > Department ID Management > ON > Register PIN
> Limit Functions
F-2-1
Specications regarding link to Memory Media
• The number of slots for Memory Media differs depending on the model. If multiple partitions
are specied in a Memory Media, it is recognized that multiple Memory Medias are
attached. Up to 16 memory medias can be recognized.
• Memory Media supports FAT32 format only.
• Write-protect Memory Media
Memory media that supports write-protect function is not supported. Writing may not be
successful although it seemed successful.
• Removing Memory Media
If the Memory Media is removed without performing termination process, the Memory
Media (including data) is not guaranteed.
F-2-2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Canon Drucker Handbücher
Canon
Canon Color Bubble Jet BJC-1000 Series Handbuch
Canon
Canon PIXMA TS6020 Bedienungsanleitung
Canon
Canon PIXMA MG5470 Series Bedienungsanleitung
Canon
Canon PIXMA G7000 Series Bedienungsanleitung
Canon
Canon MB2000 series Bedienungsanleitung
Canon
Canon Color Bubble Jet BJC-1000 Series Bedienungsanleitung
Canon
Canon MAXIFY MB5020 Bedienungsanleitung
Canon
Canon imageRUNNER 1019j Bedienungsanleitung
Canon
Canon Pixma G1000 series Bedienungsanleitung
Canon
Canon iPF700 Bedienungsanleitung
Canon
Canon PIXMA MG5500 Series Bedienungsanleitung
Canon
Canon PIXMA G7000 Series Bedienungsanleitung
Canon
Canon C1333P Bedienungsanleitung
Canon
Canon TS8350 Series Einrichtungshandbuch
Canon
Canon CX 350 Bedienungsanleitung
Canon
Canon imagePROGRAF iPF6400S Series Bedienungsanleitung
Canon
Canon BJC-3000 Series Bedienungsanleitung
Canon
Canon BJC-4400 Series Bedienungsanleitung
Canon
Canon MG3600 series Bedienungsanleitung
Canon
Canon imageCLASS MF200 Series Bedienungsanleitung
