Canon LASER CLASS 2050P Bedienungsanleitung

CANON INC.

30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

CANON U.S.A., INC.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

CANON CANADA INC.

6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada

CANON EUROPA N.V.

Bovenkerkerweg 59-61 P.O. Box 2262, 1180 EG Amstelveen, The Netherlands

CANON FRANCE S.A.

17,quai du President Paul Doumer 92414 Courbevoie Cedex, France

CANON (U.K.) LTD.

Woodhatch, Reigate, Surrey, RH2 8BF, United Kingdom

CANON DEUTSCHLAND GmbH

Europark Fichtenhain A10, 47807 Krefeld, Germany

CANON LATIN AMERICA, INC.

703 Waterford Way, Suite 400, Miami, Florida 33126, U.S.A.

CANON AUSTRALIA PTY. LTD

1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113, Australia

CANON SINGAPORE PTE. LTD.

79 Anson Road #09-01/06, Singapore 079906

CANON HONGKONG CO., LTD

9/F, The Hong Kong Club Building, 3A Chater Road, Central, Hong Kong

The contents of this guide are

printed on 70% recycled paper.

HT1-2205-000-V.1.0 122002NF CCANON INC. 2002 PRINTED IN CHINA

User

’

User

’

Please read this

uide before operatin

this equipment

After you finish readin

this

uide, store it in a safe place for future reference. EN

Use

’

uide

•

IPeur

ack

PA N T

ii Preface

HT1-2205-000-V.1.0 LSL User’s Guide

publication may be reproduced, transmitted, transcribed, stored in a

retrieval system, or translated into any language or computer language in

any form or by any means, electronic, mechanical, magnetic, optical,

chemical, manual, or otherwise, without the prior written permission of

Canon, Inc.

l-1100.book Page ii Friday, December 13, 2002 5:07 PM

Preface iii

HT1-2205-000-V.1.0 LSL User’s Guide

Trademarks

Canon®is a registered trademark, and UHQ™is a trademork of Canon

Inc.

IBM®is a registered trademark.

Microsoft®and Windows®are registered trademarks of Microsoft

Corporation.

Other brand and product names may be trademarks or registered

trademarks of their respective companies.

As an ENERGY STAR®Partner, Canon has

determined that the machine meets the Energy Star

guidelines for energy efﬁciency.

Super G3 is a phrase used to describe the new

generation of fax machines that use ITU-T V.34

standard 33.6Kbps* modems. Super G3 High Speed

Fax machines allow transmission time of

approximately 3 seconds* per page which results in

reduced telephone line charges.

* Approximately 3 seconds per page fax data transmission time based on ITU-T

No.1 Chart, (Standard Mode) at 33.6Kbps modem speed. The Public Switched

Telephone Network (PSTN) currently supports 28.8Kbps modem speeds or

lower, depending on telephone line conditions.

l-1100.book Page iii Friday, December 13, 2002 5:07 PM

iv Preface

HT1-2205-000-V.1.0 LSL User’s Guide

LEGAL LIMITATION ON USAGE OF YOUR PRODUCT AND

THE USE OF IMAGES

Using your product to scan, print or otherwise reproduce certain

documents, and the use of such images as scanned, printed or otherwise

reproduced by your product, may be prohibited by law and may result in

criminal and/or civil liability. A non-exhaustive list of these documents is

set forth below. This list is intended to be a guide only. If you are

uncertain about the legality of using your product to scan, print or

otherwise reproduce any particular document, and/or of the use of the

images scanned, printed or otherwise reproduced, you should consult in

advance with your legal advisor for guidance.

• Paper money

• Money orders

• Certiﬁcates of deposit

• Postage stamps (canceled or uncanceled)

• Identifying badges or insignias

• Selective service or draft papers

• Checks or drafts issued by governmental agencies

• Motor vehicle licenses and certiﬁcates of title

•Traveler’s checks

• Food stamps

• Passports

• Immigration papers

• Internal revenue stamps (canceled or uncanceled)

• Bonds or other certiﬁcates of indebtedness

• Stock certiﬁcates

• Copyrighted works/works of art without permission of copyright

owner

l-1100.book Page iv Friday, December 13, 2002 5:07 PM

Preface v

HT1-2205-000-V.1.0 LSL User’s Guide

USERS IN THE U.S.A.

PRE-INSTALLATION REQUIREMENTS FOR CANON

FACSIMILE EQUIPMENT

A. Location

Supply a suitable table, cabinet, or desk. See the Appendix for the

machine’s dimensions and weight.

B. Order Information

1. Only a single line, touch-tone or rotary telephone set is to be

used.

2. Order an RJ11-C modular jack (USOC code), which should be

installed by the telephone company. If the RJ11-C jack is not

present, installation cannot occur.

3. Order a normal business line from your telephone company’s

business representative. The line should be a regular voice grade

line or the equivalent. Use one line per machine.

DDD (DIRECT DISTANCE DIAL) LINE

-or-

IDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF

YOU COMMUNICATE OVERSEAS

Canon recommends an individual line following industry standards, e.g.,

the 2500 (Touch Tone) or 500 (Rotary/Pulse Dial) telephones. A dedicated

extension off a PBX unit without “Call Waiting” can be used with the

LASER CLASS 2050P. Key telephone systems are not recommended

because they send non-standard signals to individual telephones for

ringing and special codes, which may cause a fax error.

C. Power Requirements

This equipment should be connected to a standard 120-127 V AC,

three-prong grounded outlet only. Do not connect this machine to an

outlet or power line shared with other appliances that cause

“electrical noise.” Air conditioners, electric typewriters, copiers, and

machines of this sort generate electrical noise which often interferes

with communications equipment and the sending and receiving of

documents.

l-1100.book Page v Friday, December 13, 2002 5:07 PM

vi Preface

HT1-2205-000-V.1.0 LSL User’s Guide

CONNECTION OF THE EQUIPMENT

This equipment complies with Part 68 of the FCC rules and the

requirements adopted by the ACTA. On the rear panel of this equipment

is a label that contains, among other information, a product identiﬁer in

the format US:AAAEQ##TXXXX. If requested, this number must be

provided to the telephone company.

An FCC compliant telephone cord and modular jack are provided with

this equipment. This equipment is designed to be connected to the

telephone network or premises wiring using a compatible modular jack

which is Part 68 compliant. See Installation instructions for details.

The Ringer Equivalence Number (REN) is used to determine the number

of devices that may be connected to a telephone line. Excessive RENs on a

telephone line may result in the devices not ringing in response to an

incoming call. In most but not all areas, the sum of RENs should not

exceed ﬁve (5.0). To be certain of the number of devices that may be

connected to a line, as determined by the total RENs, contact the local

telephone company. The REN for this product is part of the product

identiﬁer that has the format US:AAAEQ##TXXXX. The digits

represented by ## are the REN without a decimal point (e.g., 03 is a REN

of 0.3).

This equipment may not be used on coin service provided by the

telephone company.

Connection to party lines is subjected to state tariffs.

IN CASE OF EQUIPMENT MALFUNCTION

Should any malfunction occur which cannot be corrected by the

procedures described in this guide, disconnect the equipment from the

telephone line and the power cord. The telephone line or power cord

should not be reconnected until the problem is completely resolved.

Users should contact Canon Authorized Service Facilities for servicing of

equipment. Information regarding Authorized Service Facility locations

can be obtained by calling the Canon Customer Care Center. (1-800-423-

2366)

l-1100.book Page vi Friday, December 13, 2002 5:07 PM

Preface vii

HT1-2205-000-V.1.0 LSL User’s Guide

RIGHTS OF THE TELEPHONE COMPANY

Should the equipment cause harm to the telephone network, the

telephone company may temporarily disconnect service. The telephone

company also retains the right to make changes in facilities and services

which may affect the operation of this equipment. When such changes are

necessary, the telephone company is required to give adequate prior

notice to the user.

FCC NOTICE

LASER CLASS 2050P: Facsimile Transceiver, Model H12249

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept an interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult your local authorized Canon Facsimile Dealer or an

experienced radio/TV technician for help.

l-1100.book Page vii Friday, December 13, 2002 5:07 PM

viii Preface

HT1-2205-000-V.1.0 LSL User’s Guide

Use of shielded cable is required to comply with class B limits in Subpart

B of Part 15 of the FCC Rules.

Do not make any changes or modiﬁcations to the equipment unless

otherwise speciﬁed in this guide. If such changes or modiﬁcations should

be made, you could be required to stop operation of the equipment.

Canon U.S.A. Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

TEL No. 1-800-OK-CANON

The Telephone Consumer Protection Act of 1991 makes it unlawful for

any person to use a computer or other electronic device to send any

message via a telephone fax machine unless such message clearly

contains in a margin at the top or bottom of each transmitted page or on

the ﬁrst page of the transmission, the date and time it is sent and an

identiﬁcation of the business or other entity, or other individual sending

the message and the telephone number of the sending machine or such

business, other entity, or individual.

In order to program this information into your machine, you should

complete registering your number and name. See Chapter 3, ”Registering

Information in the Machine,” for details.

l-1100.book Page viii Friday, December 13, 2002 5:07 PM

Preface ix

HT1-2205-000-V.1.0 LSL User’s Guide

USERS IN CANADA

PRE-INSTALLATION REQUIREMENTS FOR CANON

FACSIMILE EQUIPMENT

A. Location

Supply a suitable table, cabinet, or desk. See the Appendix for the

machine’s dimensions and weight.

B. Order Information

1. Provide only a single-line to touch-tone or rotary telephone set

terminated with a standard 4-pin modular phone plug. (Touch-

tone is recommended if available in your area.)

2. Order an CA11A modular jack (USOC code), which should be

installed by the telephone company. If the CA11A jack is not

present, installation cannot occur.

3. Order a normal business line from your telephone company’s

business representative. The line should be a regular voice grade

line or equivalent. Use one line per machine.

DDD (DIRECT DISTANCE DIAL) LINE

-or-

IDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF

YOU COMMUNICATE OVERSEAS

Canon recommends an individual line following industry standards [e.g.,

the 2500 (touch tone) or 500 (rotary/pulse dial) telephones]. A dedicated

extension off a PBX unit without “Camp On” signals is also permissible

with your LASER CLASS 2050P. Key telephone systems are not

recommended because they send non-standard signals to individual

telephones for ringing and special codes, which may cause a fax error.

C. Power Requirements

The power outlet should be a three-prong grounded receptacle

(Single or Duplex). It should be independent from copiers, heaters,

air conditioners or any electric equipment that is thermostatically

controlled. The rated value is 120-127 volts and 15 amperes.

l-1100.book Page ix Friday, December 13, 2002 5:07 PM

xPreface

HT1-2205-000-V.1.0 LSL User’s Guide

NOTICE

This equipment meets the applicable Industry Canada Terminal

Equipment Technical Speciﬁcations. This is conﬁrmed by the registration

number. The abbreviation, IC, before the registration number signiﬁes

that registration was performed based on a Declaration of Conformity

indicating that Industry Canada technical speciﬁcations were met. It does

not imply that Industry Canada approved the equipment.

Cet appareil est conforme aux Spéciﬁcations techniques des équipements

terminaux de l’Industrie du Canada. Ceci est conﬁrmé par le numéro

d’enregistrement. L’abréviation IC précédant le numéro d’enregistrement

signiﬁe que l’enregistrement a été effectué sur la base de la Déclaration de

conformité indiquant que le produit est conforme aux spéciﬁcations

techniques du Canada. Ceci n’implique pas que le produit ait été

approuvé par l’industrie du Canada.

Before installing this equipment, users should ensure that it is permissible

to be connected to the facilities of the local telecommunications company.

The equipment must also be installed using an acceptable method of

connection. The customer should be aware that compliance with the

above conditions may not prevent degradation of service in some

situations.

Repairs to certiﬁed equipment should be coordinated by a representative

designated by the supplier. Any repairs or alterations made by the user to

this equipment, or equipment malfunctions, may give the

telecommunications company cause to request the user to disconnect the

equipment.

Users should ensure for their own protection that the electrical ground

connections of the power utility, telephone lines and internal metallic

water pipe system, if present, are connected together. This precaution

may be particularly important in rural areas.

Users should not attempt to make such connections themselves, but

should contact the appropriate electric inspection authority, or electrician,

as appropriate.

l-1100.book Page x Friday, December 13, 2002 5:07 PM

Andere Handbücher für LASER CLASS 2050P

Inhaltsverzeichnis

Andere Canon Drucker Handbücher

Canon

Canon imageCLASS MF6500 Series Bedienungsanleitung

Canon

Canon iR2030 Bedienungsanleitung

Canon

Canon imagePROGRAF W7200 Bedienungsanleitung

Canon

Canon i 320 Bedienungsanleitung

Canon

Canon MP280 Bedienungsanleitung

Canon

Canon Pixma Pro9500 Series Bedienungsanleitung

Canon

Canon 820D - S Color Inkjet Printer Benutzerhandbuch

Canon

Canon PIXMA iP4820 Series Bedienungsanleitung

Canon

Canon MG5100 series Bedienungsanleitung

Canon

Canon PIXMA PRO-10 Bedienungsanleitung

Canon

Canon S 200 Bedienungsanleitung

Canon

Canon MG5700 Series Bedienungsanleitung

Canon

Canon TR7620 Bedienungsanleitung

Canon

Canon PIXMA G670 Bedienungsanleitung

Canon

Canon imageCLASS X LBP1440 Bedienungsanleitung

Canon

Canon i860 Series Bedienungsanleitung

Canon

Canon Pixma Pro9500 Series Bedienungsanleitung

Canon

Canon iPF5000 - imagePROGRAF Color Inkjet Printer Bedienungsanleitung

Canon

Canon imageCLASS LBP-6650DN Bedienungsanleitung

Canon

Canon Pixma iP110 series Bedienungsanleitung

Canon

Canon Pixma MG3150 Bedienungsanleitung

Canon

Canon BJC-6000 Series Handbuch

Canon

Canon imagePROGRAF iPF6300S Benutzerhandbuch

Canon

Canon Laser Shot LBP-950 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

IRA3D

IRA3D POETRY4 Bedienungsanleitung

Ricoh

Ricoh Aficio AP400 Bedienungsanleitung

BIXOLON

BIXOLON SRP-352plusV Bedienungsanleitung

Epson

Epson Stylus Photo PX700W Montageanleitung

Ricoh

Ricoh SP204SF Bedienungsanleitung

Star Micronics

Star Micronics futurePRNT TSP100 Bedienungsanleitung

Epson

Epson TM-TM88V-i Gebrauchs- und Pflegehandbuch