Canon LEGRIA FS36 Bedienungsanleitung

CanoCraft FS 3.6

for CanoScan FS2710/CanoScan 2700F Film Scanner

Users Guide

Two Ways to Learn About CanoCraft FS 3.6

•Quick Start Jump right into scanning

•Steps 1-3 Methodical approach

When you open the box

Detailed information on the scanner and the

CD-ROM.

Detailed information on how to use Plug-in

module FS.

Tells you how to use Adobe Photoshop LE, Presto!

PhotoAlbum LE and Presto! Mr. Photo.

Electronic Manuals

Electronic Manual

After you have read this book

and mastered the use of

CanoCraft FS

After you have read this book

and mastered the use of Plug-

in module FS

After reading this guide and

scanner is set up and ready

for use.

Tells you how to get the best

scanning results.

Detailed information

on care of the scanner

and handling the

accompanying CD-ROM.

When using the accompanying

application software.

Detailed information on how to use CanoCraft

FS.

CanoScan FS2710

Product Guide

Describes operating procedure from set up and

software installation to scanning and confirmation

of operation. Please read before using the scanner

for the first time.

Printed Manual

CanoScan FS2710

Getting Started

Plug-in module FS

Users Guide

CanoCraft FS

Users Guide

Manual for Each

Application Software

Electronic Manual

When using

Windows version.

When using

Macintosh version.

This Guide

How to Make Best Use of the Manuals

How to Use the Users Guide

This guide is the instruction manual for CanoCraft FS 3.6 scanning application

software for use with Canon film scanners. In addition to functioning as a stand-

alone application program on the Windows platform, CanoCraft FS also serves as a

TWAIN driver in TWAIN-compliant application programs. With the exception of

program starting and file saving, the basic procedures for using CanoCraft FS as a

stand-alone program and TWAIN driver are virtually the same. This guide,

therefore, illustrates the procedures using CanoCraft FS as a stand-alone

application. To use the program as a TWAIN driver from within other applications,

please supplement this guide with the Windows instruction manual and the guides

accompanying your TWAIN-compliant applications.

How to Use this Guide

Quick Start

A digest of the complete CanoCraft FS operating procedures. Those who wish to

jump into scanning should read this section.

Step 1 Basic Procedures

An explanation of how to install CanoCraft FS and the various program window

names and functions. Be sure to read this section.

Step 2 Scanning

A step-by-step explanation of the scanning process. Be sure to read this section.

Step 3 Adjusting Images

An explanation of how to adjust color balance and brightness. Read this section as

required.

Other Functions

An explanation of CanoCraft FS’s preference, printer and fax settings. Read this

section as required.

Editing

An explanation of CanoCraft FS’s image editing functions. Read this section as

required.

CanoCraft FS Copy

An explanation of how to use CanoCraft FS Copy. Read this section as required.

Appendices

Look to this section for troubleshooting tips, instructions on how to adjust

CanoCraft FS settings, a glossary and an index. Read this section as required.

Table of Contents

CanoCraft FS Features................................................................................9

Quick Start <Jump Right into Scanning>

Quick Start <Jump Right into Scanning>................................................11

Step 1 Basic Procedures

Installing CanoCraft FS ............................................................................15

Installing CanoCraft FS........................................................................................ 15

Precautions When Connecting the Scanner to a Windows® 95 Computer .... 16

Starting and Closing CanoCraft FS ..........................................................18

Starting CanoCraft FS from the Windows Desktop .......................................... 18

Starting CanoCraft FS from Photoshop (TWAIN- Compliant Application) ...... 19

Closing CanoCraft FS ........................................................................................... 19

Program Window Names and Functions ................................................20

CanoCraft FS Program Window ......................................................................... 20

CanoCraft FS Copy Program Window ................................................................ 21

Settings Display Area Pop-Up Menu .................................................................. 22

CanoCraft FS Menu Commands ..............................................................23

Menu Bar Pull-Down Menus............................................................................... 23

How to Find Out More About a Procedure You Don't Understand......25

Step 2 Scanning

Scanning Procedures................................................................................27

Selecting the Film Type ............................................................................29

Selecting the Image Type ........................................................................30

Determining the Image Format ......................................................................... 31

Selecting Resolution and Magnification Settings ..................................32

About Resolution and Magnification ................................................................ 32

Selecting a Scan Resolution Setting ................................................................... 33

Selecting an Output Resolution Setting ............................................................ 34

Procedures for Setting the Output Resolution ................................................. 35

Determining the Input and Output Resolution and Output Magnification ... 36

Previewing................................................................................................37

Zooming an Image for Verification ............................................................... 38

Rotating the Image to Change Its Orientation............................................. 39

Rotate/Flip Dialog ........................................................................................... 39

Table of Contents

Adjusting Brightness and Coloring .........................................................40

Selecting the Scan Area ...........................................................................41

Selecting the Scan Area ...................................................................................... 41

Changing the Scan Area Selection ..................................................................... 42

Unlocked State .......................................................................................... 42

Locked State .............................................................................................. 43

Fixing the Aspect Ratio ....................................................................................... 45

Aspect Ratio Dialog ........................................................................................ 45

Final Scan and Saving ..............................................................................46

Step 3 Adjusting Images

To Obtain Better Images..........................................................................50

Image Adjustment Commands ................................................................52

Changing the Adjustment Mode ............................................................54

Adjusting Brightness and Coloring (Easy Mode)....................................55

Brightness Tab ..................................................................................................... 55

Coloring Tab ........................................................................................................ 56

Adjusting Highlights and Shadows (Easy Mode)....................................57

Adjusting a Histogram (Expert Mode) ....................................................58

How to Interpret a Histogram ....................................................................... 59

How to Adjust a Histogram ........................................................................... 59

Adjusting Brightness/Contrast (Expert Mode)........................................61

Adjusting Brightness....................................................................................... 62

Adjusting Contrast .......................................................................................... 62

Adjusting Gamma Values (Expert Mode) ...............................................63

Setting the Gamma Value Correctly .............................................................. 64

Adjusting a Tone Curve (Expert Mode)...................................................65

How to Interpret the Tone Curve .................................................................. 66

Adjusting a Tone Curve .................................................................................. 66

Adjusting the Color Balance (Expert Mode)...........................................67

Adjusting Threshold Settings (Easy/Expert Mode) .................................69

Adjusting the Exposure Settings .............................................................70

Adjusting the Focus .................................................................................72

Table of Contents

Other Functions

CanoCraft FS Preference Settings ...........................................................74

Resetting Default Settings.......................................................................76

Default Categories and Settings .................................................................... 76

Printing .....................................................................................................77

Printer Setup ............................................................................................78

Sending a Fax ...........................................................................................79

Fax Setup ..................................................................................................80

Selecting the Scanner ..............................................................................81

Scanner Self-Test ......................................................................................82

Viewing Version Data ..............................................................................83

Editing

Copying to the Clipboard ........................................................................85

Copying an Image ........................................................................................... 85

Clearing the Clipboard ................................................................................... 85

Redoing an Edit........................................................................................86

Undoing the Previous Action ......................................................................... 86

Redoing an Action After the Undo Command ............................................. 86

Undo All .......................................................................................................... 86

Adjusting an Image..................................................................................87

Sharpening an Image ..................................................................................... 87

Blurring an Image ........................................................................................... 88

Removing Noise .............................................................................................. 89

Inverting an Image ......................................................................................... 90

Formatting an Image ...............................................................................91

Find the Edges................................................................................................. 91

Find Lines......................................................................................................... 92

Pixelate ............................................................................................................ 93

Posterize .......................................................................................................... 94

Low Relief........................................................................................................ 95

Halftone .......................................................................................................... 96

Editing a Saved File..................................................................................97

Procedures for Loading a Saved File ............................................................. 97

Saving a File After Editing ............................................................................. 98

Deleting a File after Editing........................................................................... 99

Table of Contents

Trademarks

• Adobe®and Acrobat®are trademarks of Adobe Systems Incorporated.

• IBM, IBM PC/AT Series are trademarks of International Business Machines Corp., USA.

• Windows is a registered trademark of Microsoft Corporation in the United States

and/or other countries.

• All other brand names and product names used in this manual are trademarks or

registered trademarks of their respective holders.

Copying with CanoCraft FS Copy

Displaying the Copy Window ................................................................101

Procedures for Opening CanoCraft FS Copy ............................................... 101

Copying ..................................................................................................102

Copying Procedures ...................................................................................... 102

Adjusting CanoCraft FS Copy Settings ..................................................107

Changing the Printer Settings .......................................................................... 107

Changing the Scanner Settings ........................................................................ 108

Scan Resolution ............................................................................................. 109

Film Type ....................................................................................................... 109

Exposure ........................................................................................................ 109

Focus .............................................................................................................. 109

Adjust (Alt + A) ............................................................................................. 110

Preferences .................................................................................................... 110

Version Information ..................................................................................... 110

Appendices

Troubleshooting .....................................................................................112

Problems with Software Installation ........................................................... 112

Problems Starting Software Programs ........................................................ 113

Problems with Scanning ............................................................................... 114

Image Quality Problems ............................................................................... 116

Problems Saving Images ............................................................................... 117

Problems with Printing................................................................................. 117

Uninstalling CanoCraft FS......................................................................118

Configuring CanoCraft FS......................................................................120

CanoCraft FS Automatic Configuration ...................................................... 120

CanoCraft FS Configuration ......................................................................... 121

List of Film Types ....................................................................................124

Glossary ..................................................................................................126

Index .......................................................................................................130

Customer Support Help Desk ................................................................133

Conventions Used in this Guide

The following symbols are used throughout the guide to indicate important

information.

•This symbol indicates precautions or limitations you need to know.

Ensure that you read all Important Notes to avoid errors.

•This symbol indicates supplementary information. Reading these notes is

recommended.

Names and Examples

CanoCraft FS 3.6 is generally referred to as CanoCraft FS in this guide. Although

CanoCraft FS 3.6 is compatible with Windows®95, Windows®98 and Windows NT®

4.0, the screen-capture examples in this guide are taken from Windows®95.

References to Windows in this guide apply to all three versions above.

CanoCraft FS 3.6 may be used to operate CanoScan 2700F and CanoScan FS2710

film scanners. This guide presents the operating procedures using the CanoScan

FS2710 as the primary example.

Button and Menu Conventions in the Text

• Buttons that appear in application windows are enclosed with a [ ] mark.

Example

Click [File] and select [Preview] or

click the [Preview] button.

• Menu items are enclosed in square brackets [ ].

Example

Click the [Image Type] submenu

and select [24bit Color]

• Screen messages are also enclosed in square brackets [ ].

CanoCraft FS Features

• Scanning Software that Can Perform Image Processing

Scanning Software that Can Perform Image Processing

CanoCraft FS is a scanning application that works with CanoScan FS2710 and

CanoScan 2700F film scanners on the Windows 95/98 and Windows NT 4.0

platforms. Equipped with a broad array of image retouching functions in

addition to its scanning and output features, the program also serves as a 32-bit

TWAIN Driver that can be called from TWAIN-compliant applications.

• Simple User Interface

Set the parameters, preview the image, make a few adjustments if required and

save the file: these four actions are simple to perform with the user-friendly

program window. Perform essential functions using your choice of buttons, pull-

down menus, pop-up menus or keyboard shortcuts.

• Large, Easy-to-Read Preview Window

Priority has been placed on making it easy to examine scans by maximizing the

size of the preview window. Preview window sizes vary according to the monitor

resolution and type of film being scanned.

• Canon ColorGear™ Color Management System

The proprietary Canon ColorGear color management system produces consistent

results from input and output devices, reducing the need for time-consuming

manual color correction.

• Help with How to Use the Program is Always at Hand

Need assistance with a scanning command? Click on the [?] mark in each window

or dialog. Context-sensitive Help topics display on the screen. Select a topic or

perform a key-word search to find your answer.

• Includes CanoCraft FS Copy Software

CanoCraft FS Copy works with your scanner and printer to instantly turn into an

easy-to-use copier. The CanoCraft FS suite of programs includes CanoCraft FS

Copy, which enables you to readily output the images that you scan directly to

your printer.

Quick Start

Jump Right into Scanning

●

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Software Handbücher

Canon

Canon PowerShot A530 Sicherheitsleitfaden

Canon

Canon POWERSHOT A75 Sicherheitsleitfaden

Canon

Canon FS 2710 Bedienungsanleitung

Canon

Canon 0273B001 - Elura 90 Camcorder Bedienungsanleitung

Canon

Canon WebView LivescopeMV LE Bedienungsanleitung

Canon

Canon FS10 Bedienungsanleitung

Canon

Canon 2MC - Elura 2MC MiniDV Digital Camcorder Bedienungsanleitung

Canon

Canon EOS 60D Bedienungsanleitung

Canon

Canon 3421B001 - FS200 32GB Flash Memory Camcorder Bedienungsanleitung

Canon

Canon PowerShot S95 Kurzanleitung

Canon

Canon SD400 - PowerShot Digital ELPH Camera Sicherheitsleitfaden

Canon

Canon Mk2500 Bedienungsanleitung

Canon

Canon 0286B001 - Optura S1 Camcorder Bedienungsanleitung

Canon

Canon PowerShot SD880 IS Digital ELPH Montageanleitung

Canon

Canon Powershot S80 Sicherheitsleitfaden

Canon

Canon 2689B001 - DC 330 Camcorder Bedienungsanleitung

Canon

Canon CanoScan FS4000US Bedienungsanleitung

Canon

Canon 2675B001 - SELPHY ES3 Photo Printer Sicherheitsleitfaden

Canon

Canon CAPTUREPERFECT 3.1 Bedienungsanleitung

Canon

Canon EOS 20Da Bedienungsanleitung

Canon

Canon EOS 5D Mark II - EOS 5D Mark II 21.1MP Full Frame CMOS Digital SLR... Bedienungsanleitung

Canon

Canon EOS-1D Mark II Digial Kurzanleitung

Canon

Canon PowerShot ELPH 100 HS IXUS 115 HS Kurzanleitung

Canon

Canon 0744B001 - DC 10 Camcorder Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung

Novell

Novell SP2 - S Bedienungsanleitung

Lexmark

Lexmark Apps Service-Handbuch