Canon Powershot Pro90 IS Bedienungsanleitung

1ImageBrowser Software User Guide

2ImageBrowser Software User Guide

Table of Contents (1/2)

Chapter 1 Try It! ImageBrowser

Chapter 2 What is ImageBrowser ?

Chapter 3 Managing Images

Chapter 4 Viewing Images

Chapter 5 Using the Camera Window

Starting ImageBrowser ............................................................. 4

Downloading Images to Your Computer .................................. 9

Printing Images ....................................................................... 12

Supplementary Information ....................................................14

What Can ImageBrowser Do? ................................................. 15

Storing Images ........................................................................ 17

Understanding the Browser Window ......................................18

Changing the Browser Window Display ..................................19

Using Contextual Menus .........................................................22

Moving and Copying Images ................................................... 23

Deleting Images ...................................................................... 26

Rotating Images ...................................................................... 27

Duplicating Images..................................................................28

Renaming Images .................................................................... 29

Viewing Image Information ....................................................30

Creating Folders ...................................................................... 31

Renaming Folders .................................................................... 32

Deleting Folders ...................................................................... 33

Selecting Folders ..................................................................... 34

Opening Images ...................................................................... 35

Changing the Magnification ................................................... 36

Editing Images ......................................................................... 37

Editing Images with Other Programs ...................................... 41

Opening the Camera Window ................................................ 42

Downloading Images .............................................................. 43

Deleting Images in the Camera ...............................................45

Rotating Images in the Camera ............................................... 46

Adding Computer Images to the Camera ................................47

Checking and Modifying the Camera Settings ........................49

Other Functions of the Camera Window .................................50

3ImageBrowser Software User Guide

Table of Contents (2/2)

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

NOTE

•This guide uses Mac OS X (v10.2) screen shots and procedures in

the explanations. The screen shots and procedures may vary

slightly if you are using another version of the Mac OS.

•The following terms are used in this guide.

Mac OS X is used for Mac OS X (v10.1/v10.2/v10.3)

Mac OS 9 is used for Mac OS 9.0–9.2

Memory card is used for CF cards, SD cards and PC cards.

Chapter 6 Using Supplementary Features Appendices

Index

Creating Images for E-mail ...................................................... 51

Exporting Images .................................................................... 53

Running Slide Shows ...............................................................55

Adding Sounds to Images ........................................................ 58

Saving the “My Camera Settings” to the Camera ....................60

Printing Images ....................................................................... 70

Printing Images over Multiple Pages .......................................78

Sorting Images by Date and Time - TimeTunnel ......................79

Playing Movies ........................................................................ 81

Editing Movies (Mac OS X Only ) .............................................82

Converting RAW Images ......................................................... 85

Operating the Camera Shutter from a Computer ...................89

Stitching Panoramic Images with PhotoStitch .........................93

Supported File Formats ........................................................... 94

Starting ImageBrowser Automatically (Mac OS X Only) ..........95

Preventing ImageBrowser from Starting Automatically (Mac OS 9 Only) ..

Automation Wizard Feature at Startup (Mac OS 9 Only) ........97

Customizing Preferences ....................................................... 101

Setting up Slide Shows on the Camera ..................................104

Print Settings ......................................................................... 105

Troubleshooting .................................................................... 107

Index ..................................................................................... 108

4ImageBrowser Software User Guide

Chapter 1

Try It! ImageBrowser

This chapter covers the ImageBrowser basics, such as starting the

program, downloading images from the camera and printing images. It

begins with the procedures for starting ImageBrowser.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

IMPORTANT

•This guide assumes that all the relevant software programs and

drivers have been correctly installed on your computer. If you

have not yet installed the software, please read the guide

supplied with your product and install it.

Starting ImageBrowser (1/5)

Starting ImageBrowser with Mac OS X

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

IMPORTANT

•You can also use this procedure to start ImageBrowser in Mac

OS X when using a memory card reader.

1. Use the interface cable to connect the camera to the

computer.

Please see the manual supplied with your camera for

connection instructions.

Some models cannot connect with the computer unless you set

them to a particular mode, such as the Playback mode. As

described in the guides for these models, set the camera to the

correct mode to transfer data.

2. Close iPhoto or Image Capture if either program starts up.

3. Double-click the [Canon ImageBrowser] icon on the

desktop.

ImageBrowser starts.

5ImageBrowser Software User Guide

Chapter 1

Try It! ImageBrowser

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

REFERENCE

•You can also start ImageBrowser automatically without starting

iPhoto or Image Capture when you connect the camera to the

computer. See the Starting ImageBrowser Automatically (Mac

OS X Only) topic in the Appendices for information on this

topic.

•Depending on the selections you make during installation, the

Canon ImageBrowser icon may not appear on the desktop. In

this case, start ImageBrowser by double-clicking on the applica-

tion using the following sequence.

Locate and open the [Canon Utilities] folder, then open the

[ImageBrowser] folder and double-click on the [ImageBrowser]

icon.

4. Click [Canon Camera] in the Explorer View section.

Starting ImageBrowser (2/5)

A dialog similar to the one below will open. (This dialog will

only appear the first time the program is started.)

5. Confirm that [USB Port] is selected in the [Port] cat-

egory and that your camera model name or [Canon

Camera] is selected in the [Detected Camera] category

and click [Set].

6. Close iPhoto or Image Capture if either program starts

up.

The Camera Window will open and display the images in the

camera.

Explorer View Section

Your camera model name

or [Canon Camera] and

the USB port number (i.e.

@1) appears here.

6ImageBrowser Software User Guide

Chapter 1

Try It! ImageBrowser

Starting ImageBrowser (3/5)

Starting ImageBrowser with Mac OS 9

■Starting ImageBrowser by connecting a camera to

your computer

This is the method in which ImageBrowser is started by

connecting the camera to the computer and preparing it for

communication.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

IMPORTANT

•This method can only be used when the camera is connected to

the computer with an interface cable. The program may not

start automatically with some camera models.

•If you are using a memory card reader, refer to the Starting

from the ImageBrowser Icon section of the Starting

ImageBrowser (5/5) topic.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

REFERENCE

•To stop ImageBrowser from starting automatically, refer to the

Preventing ImageBrowser from Starting Automatically (Mac OS

9 Only) topic of the Appendices.

1. Use the interface cable to connect the camera to the

computer.

Please see the manual supplied with your camera for

connection instructions.

Some models cannot connect with the computer unless you set

them to a particular mode, such as the Playback mode. As

described in the guides for these models, set the camera to the

correct mode to transfer data.

The ImageBrowser Automation Wizard dialog will appear the

first time you start ImageBrowser.

This dialog allows you to select the next action for

ImageBrowser to automatically perform after it is started.

See the Troubleshooting topic in the Appendices if a dialog like

the ImageBrowser Automation Wizard fails to appear.

7ImageBrowser Software User Guide

Chapter 1

Try It! ImageBrowser

Starting ImageBrowser (4/5)

2. For this example, leave the [Display Images] option

selected and click the [OK] button.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

REFERENCE

•See the Automation Wizard Feature at Startup (Mac OS 9 Only)

topic in the Appendices for information about [Download

Images] or [Launch RemoteCapture].

A dialog similar to the following one will appear. (This dialog

will only appear the first time the program is started.)

3. Click [Set].

The Camera window will open and display the camera’s

images.

The model name

of the camera that

you are using

appears here.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

REFERENCE

•Procedures for Subsequent ImageBrowser Startups

When you start ImageBrowser again the next time, the

previously selected auto processing option will display in the

dialog box. To execute the command, click the [Start] button.

To do nothing, click the [Cancel] button and to change the

settings, click the [Settings change] button.

The previously selected option will display.

•See the Automation Wizard Feature at Startup (Mac OS 9 Only)

topic in the Appendices for information about changing the

settings.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

IMPORTANT

•The ImageBrowser Automation Wizard only appears when

ImageBrowser starts automatically after you connect the cam-

era to the computer with the interface cable. It will not appear

when you start ImageBrowser by using the icon as described on

the next page.

8ImageBrowser Software User Guide

Chapter 1

Try It! ImageBrowser

Starting ImageBrowser (5/5)

Starting from the ImageBrowser icon

Use this method to start ImageBrowser if you are using a

memory card reader. It may also be used to start ImageBrowser

without connecting a camera or to restart it after exiting.

1. Double-click the [Canon ImageBrowser] icon on the

desktop.

ImageBrowser starts.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

REFERENCE

•Depending on the selections you make during installation, the

Canon ImageBrowser icon may not appear on the desktop. In

this case, start ImageBrowser by double-clicking on the applica-

tion using the following sequence.

Locate and open the [Canon Utilities] folder, then open the

[ImageBrowser] folder and double-click on the [ImageBrowser]

icon.

9ImageBrowser Software User Guide

Chapter 1

Try It! ImageBrowser

This section explains how to download images from the camera to a

computer.

Camera Window

■Mac OS X

Click [Canon Camera] in the Explorer View section to open the

Camera Window.

Downloading Images to Your Computer (1/3)

If you are using a memory card reader, open the memory card

that appears in the Explorer View section and double-click the

[DCIM] folder.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

REFERENCE

•The Camera Window does not appear when you start

ImageBrowser from the desktop. However, when you connect

the camera and make it ready for communication with your

computer, the Camera Window appears.

If the Camera Window does not appear even

when you prepare the camera for communica-

tion, click [Canon Camera] at the bottom left

of the Browser Window and select the appro-

priate port and camera model.

Your camera model name appears here

Images from the camera display in order

■Mac OS 9

Open the Camera Window by connecting the camera to the

computer to start ImageBrowser and selecting [Display Images]

or [Download Images] in the ImageBrowser Automation

Wizard.

10 ImageBrowser Software User Guide

Chapter 1

Try It! ImageBrowser

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

REFERENCE

•With Mac OS 9, select [Macintosh HD] in the Explorer View

section.

Downloading Images to Your Computer (2/3)

Creating a destination folder

Let’s begin with how to create a new folder to use as the

destination folder for images imported from the camera.

1. Click the Browser Window to bring it to the front.

2. Select [Users] on the startup disk and [your user log-in

name].

New folders are created on the disk that you select here.

Browser Window

Explorer View Section

The disks available to your computer display in the Explorer View area.

Browser Area

3. On the [File] menu, click [New Folder].

A new folder is created.

4. Input a new folder name and press the [return] key.

This provides the new folder with the specified name.

Andere Handbücher für Powershot Pro90 IS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Software Handbücher

Canon

Canon 40D - EOS 40D DSLR Bedienungsanleitung

Canon

Canon 9540A003 - Optura 400 Camcorder Bedienungsanleitung

Canon

Canon ZR200 Montageanleitung

Canon

Canon LEGRIA FS36 Bedienungsanleitung

Canon

Canon EOS Rebel T3 18-55mm IS II Kit Bedienungsanleitung

Canon

Canon ZR200 Montageanleitung

Canon

Canon WebView LivescopeMV Bedienungsanleitung

Canon

Canon PowerShot SD430 DIGITAL ELPH WIRELESS Sicherheitsleitfaden

Canon

Canon D1250U2F - CanoScan USB Flatbed Scanner Bedienungsanleitung

Canon

Canon HV10 - Camcorder - 1080i Bedienungsanleitung

Canon

Canon FS10 Bedienungsanleitung

Canon

Canon Optura 30 - Optura 30 MiniDV Camcorder Bedienungsanleitung

Canon

Canon ZR90 Bedienungsanleitung

Canon

Canon CanoScan D646U Bedienungsanleitung

Canon

Canon imagePROGRAF W6400 Bedienungsanleitung

Canon

Canon FAXPHONE L170 Kurzanleitung

Canon

Canon CanoScan FB620P Bedienungsanleitung

Canon

Canon REALiS SX80 Mark II D Bedienungsanleitung

Canon

Canon 9540A003 - Optura 400 Camcorder Bedienungsanleitung

Canon

Canon 40D - EOS 40D DSLR Bedienungsanleitung

Canon

Canon EOS Rebel XS 18-55IS Kit Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon 2689B001 - DC 330 Camcorder Bedienungsanleitung

Canon

Canon BJC-S830D Benutzerhandbuch

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung

Novell

Novell SP2 - S Bedienungsanleitung

Lexmark

Lexmark Apps Service-Handbuch