Canon Creative Park Elastic-powered Duck Bedienungsanleitung

1. Carefully cut out the parts.

2. Fold along the dotted lines, making mountain

or valley folds as indicated.

3. Attach the glue spots on each part together.

4. Glue the parts together, and you’re done!

*Please read the Assembly Instructions

carefully before you begin.

Tools

Scissors

Glue (We recommend quick-drying paper glue)

3 rubber bands (preferably brand new ones)

Actual size illustration:

check the size of your rubber bands here.

How to assemble your model neatly

Scoring along the fold lines in advance with a dried

up pen or a ruler with slightly sharp corners will result

in a neater model.

*Be careful not to press too hard as the paper may tear.

Caution

Keep scissors and glue away from small children.

Be careful not to cut your fingers when using scissors.

Scissors line

Cut in line

Glue spot

Notation Key

Assembly Instructions

About 1.57 inches in diameter

Mountain fold

Valley fold

Elastic-powered Duck : Assembly Instructions

Assemble the tires

Wind part H around and glue it down.

Glue down the end after rolling.

Attach part K, enveloping it

around the parts you cut

and bent back.

Attach the other side too.

View from above

Glue

Fold in half along the fold lines,

glue together at the back and make a ring.

Adding curves to the part first will make it

easier to form a ring.

Glue

Back

After gluing parts L and M together back to back,

attach the ring you have made.

Assemble the front tires using parts C, D and F, in the same way.

Assemble the axle

Add curves by pressing and rolling it

against the corner of a table,

with the printed side face up.

Fold the edge to make a triangular prism,

and roll the piece up to form a stick

(about 4mm wide).

Cut three, equally-spaced slots in both ends

of part G, up to the grey valley fold line,

and bend them back.

*The fine strips of paper are thick and hard

so be careful of paper cuts.

Glue

Attach part O to both ends.

Follow the same process to

assemble the other axle.

Elastic-powered Duck : Assembly Instructions

Tie one end of the band to the band stopper,

and the other end to the middle of the axle.

Glue together as shown in the diagram,

and assemble the duck's head.

Glue together as shown in the diagram,

and assemble the duck's body.

Glue together as shown in the diagram,

and assemble the duck's beak.

Assemble the front and back wheels

Cut the rubber band

to make a string.

If necessary, cut off the ends.

Attach the back tires to both ends of the axle.

Follow the same process to assemble

the front wheels.

*Do not attach a rubber band to the front wheels.

Assemble the head and beak

Do not attach.

Fold along the fold line,

and glue together

at the reverse side.

Assemble the body

Elastic-powered Duck : Assembly Instructions

Attach the wheels

Assemble together

Glue

Attach. Attach.

Follow the fold lines,

and glue together

at the back.

After turning the duck's body over,

glue the tummy to it.

Being careful not to mix up the front and back wheels,

put the axles into the grooves on the body.

Check that the wheels spin smoothly.

Feed the band stopper through the hole

at the front of the body to the outside.

Be careful that the band doesn't come undone.

Check that the band stopper doesn't come loose,

and wind the rubber band around the back wheels

(with the larger tires).

Attach the duck's head and beak

to the completed body, and you're done!

Elastic-powered Duck : Assembly Instructions

If your car doesn't run well, check the following points to repair it.

Are the axles or tires stuck against the body? Are the wheels or tires bent?

Has the band lost its elasticity? Is the band wound up too tightly?

Has the band come loose from the tire? Is the band tangled up around the axle?

How to play

Pull the car backwards along the ground, gently

pushing down on the back wheels.

Point the car in the direction you want it to run,

let it go and watch it take off!

Be careful not to wind the band too tightly

as it may snap or come untied.

Play with it on a flat surface such as a table or the floor

(wooden floorboards work better than carpet).

Elastic-powered Duck : Assembly Instructions

Inhaltsverzeichnis

Andere Canon Spielzeug Handbücher

Canon

Canon PaperCraft Gift Box E Bedienungsanleitung

Canon

Canon Paper Craft Castel Sant'Angelo Italy Bedienungsanleitung

Canon

Canon Creative Park Ragdoll Programmierhandbuch

Canon

Canon Paper Craft Clown and sea lion acrobatics Bedienungsanleitung

Canon

Canon Sidewheeler Konfigurationshandbuch

Canon

Canon Creative Park Nikko Toshogu Shrine Yomeimon Bedienungsanleitung

Canon

Canon Creative Park Pomeranian Bedienungsanleitung

Canon

Canon PAPER CRAFT Pop-up Card Teacup Bedienungsanleitung

Canon

Canon Science Papercraft Biology Series Bedienungsanleitung

Canon

Canon CREATIVE PARK Falcon Bedienungsanleitung

Canon

Canon Creative Park Shaky-Shaky Maracas Bedienungsanleitung

Canon

Canon CREATIVE PARK 3D Decoupage Bedienungsanleitung

Canon

Canon Creative Park Leaping Goat Pattern Bedienungsanleitung

Canon

Canon Creative Park Sea Lion Bedienungsanleitung

Canon

Canon Creative Park Tree Frog Bedienungsanleitung

Canon

Canon Creative Park Moving Clown in a barrel Bedienungsanleitung

Canon

Canon Supersaurus Bedienungsanleitung

Canon

Canon Paper Craft Tower Bridge England Bedienungsanleitung

Canon

Canon Chevrolet Confederate Bedienungsanleitung

Canon

Canon Creative Park Hwaseong Fortress Bedienungsanleitung

Canon

Canon Creative Park Church of the Transfiguration Bedienungsanleitung

Canon

Canon CREATIVE PARK New Baby Bedienungsanleitung

Canon

Canon Creative Park Pop-up Card Halloween/Black cat &... Bedienungsanleitung

Canon

Canon Creative Park Ships of the world Esmeralda Bedienungsanleitung

Beliebte Spielzeug Handbücher anderer Marken

marklin

marklin 37321 Bedienungsanleitung

GREAT PLANES

GREAT PLANES Pitts M-12S Bedienungsanleitung

NOCH

NOCH 14261 Bedienungsanleitung

Hausler

Hausler 450 SE V2 Bedienungsanleitung

Dynaflite

Dynaflite Daydream Bedienungsanleitung

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Handbuch

Kenner

Kenner Batman 63651 Bedienungsanleitung

LEGO

LEGO 8527 Bedienungsanleitung

iKarus

iKarus ECO 8 Bedienungsanleitung

Multiplex

Multiplex EasyStar II Bedienungsanleitung

Walkera

Walkera 38 Bedienungsanleitung

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Bedienungsanleitung

MD MXION SWD Bedienungsanleitung

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Bedienungsanleitung

marklin

marklin 39671 Bedienungsanleitung

Meccano

Meccano 15103 Bedienungsanleitung

LEGO

LEGO TECHNIC 8735 Bedienungsanleitung

Mattel

Mattel HOTWHEELS DWL04 Bedienungsanleitung