Canon Super Glider Bedienungsanleitung

Super Glider

This model is a glider with a simple design.

A glider is an airplane without an engine. It

must skillfully use uprising air currents to

keep it flying.

You can adjust this glider so that it flies very

well.

1. Build the WINGS

3. Put it together

Glue together.

Cut away the gray areas around

the FUSELAGE and bend the tabs outward.

Apply glue to the inside surfaces

of the FUSELAGE and glue the two

pieces together,

starting at the tail and working

your way forward to the nose.

Curve the WING, so that the highest spot on the WING

is a point one-third of the way from the front edge

of the WING, when viewed from the side.

Bend the left and right sides

of the WING upward

from the center line, about 15%.

The black lines indicate

one-third of the way

from the front edge of the WING. Curve the WING so the

center is raised about

1 mm (1/25 inch).

15˚ 15˚

WING (Underside)

FUSELAGE (Right)

FUSELAGE (Left)

1/3

Front

edge Back edge

Left Right

WING, viewed

from the side.

WING, viewed

from the front.

2. Build the FUSELAGE

Glue the WINGS and TAIL in place.

Attach two paper clips.

WING

TAIL

FUSELAGE

Paper clips

Using the triangles on the

WINGS as guides, align the center

of the WING with the FUSELAGE

and glue it down.

front

rear

gluetofuselage.

Apply glue and

fasten together.

(If you want to fly the glider outside, print these patterns

on white construction paper for inkjet.)

Directions

*Cut out the card above and save it. You can collect the cards from each of the Papercraft

projects to make your own mini-book!

Canon Papercraft Mini-book

Toy Series

Papercraft Toy Series Super Glider (section 1) Canon is a registered trademark of Canon Inc.

Front

Rear

Glue to FUSELAGE.

Front

Glue to

FUSELAGE.

Glue to

FUSELAGE.

WING

TAIL

Toy Series Super Glider

Don’t throw at people!

Don’t play in the street!

15˚ 15˚

Adjusting the tail:

If the plane dives too much, curve the trailing edge of the

tail upward (blue area).If the plane climbs too much,

curve the trailing edge of the tail downward (red area).

Curve this portion

of the tail.

WING angle:

(viewed from the front of the glider.)

Bend the WINGS upward 15 degrees. Bend the WINGS upward 15 degrees.

The tail should be level.

Papercraft Toy Series Super Glider (section 2)

URL: http://bj.canon.co.jp/english/3D-papercraft/

Canon 3D Papercraft

Canon is a registered trademark of Canon Inc.

Fold in two and glue together.

Fold the tabs outward.

Cut away the gray area.

FUSELAGE

(Right) FUSELAGE

(Left)

Papercraft Toy Series Super Glider (section 3)

mountain foldMountain fold

Canon is a registered trademark of Canon Inc.

Andere Canon Spielzeug Handbücher

Canon

Canon Paper Craft Snowy owl (Female) Bedienungsanleitung

Canon

Canon Creative Park Matryoska doll Bedienungsanleitung

Canon

Canon Lunar Globe Bedienungsanleitung

Canon

Canon Creative Park Halloween Wreath Bedienungsanleitung

Canon

Canon Creative Park Moving Clown in a barrel Bedienungsanleitung

Canon

Canon CREATIVE PARK Mobile Sky and Sea Bedienungsanleitung

Canon

Canon CREATIVE PARK 3D Paper Mosaic (Tropical... Bedienungsanleitung

Canon

Canon Science Papercraft Biology Series Bedienungsanleitung

Canon

Canon CREATIVE PARK Paper Copter Bedienungsanleitung

Canon

Canon Paper Craft Castel Sant'Angelo Italy Bedienungsanleitung

Canon

Canon Virgin atlantic AIRBUS A340-600 Bedienungsanleitung

Canon

Canon Paper Craft Whoopen swan Bedienungsanleitung

Canon

Canon Tyrannosaurus rex Bedienungsanleitung

Canon

Canon Creative Park Pop-up Card (Snowman) Bedienungsanleitung

Canon

Canon Creative Park Hwaseong Fortress Bedienungsanleitung

Canon

Canon CREATIVE PARK Pop-up Card Bedienungsanleitung

Canon

Canon creative park Kurzanleitung

Canon

Canon CREATIVE PARK Komatsu Special Vehicle 04... Bedienungsanleitung

Canon

Canon PAPER CRAFT Pop-up Card Teacup Bedienungsanleitung

Canon

Canon Grand Piano Bedienungsanleitung

Canon

Canon Sidewheeler Konfigurationshandbuch

Canon

Canon PAPER CRAFT Bedienungsanleitung

Canon

Canon CREATIVE PARK Temple of the Emerald, Thai Bedienungsanleitung

Canon

Canon Creative Park Elastic-powered Turtle Bedienungsanleitung

Beliebte Spielzeug Handbücher anderer Marken

marklin

marklin 37321 Bedienungsanleitung

GREAT PLANES

GREAT PLANES Pitts M-12S Bedienungsanleitung

NOCH

NOCH 14261 Bedienungsanleitung

Hausler

Hausler 450 SE V2 Bedienungsanleitung

Dynaflite

Dynaflite Daydream Bedienungsanleitung

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Handbuch

Kenner

Kenner Batman 63651 Bedienungsanleitung

LEGO

LEGO 8527 Bedienungsanleitung

iKarus

iKarus ECO 8 Bedienungsanleitung

Multiplex

Multiplex EasyStar II Bedienungsanleitung

Walkera

Walkera 38 Bedienungsanleitung

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Bedienungsanleitung

MD MXION SWD Bedienungsanleitung

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Bedienungsanleitung

marklin

marklin 39671 Bedienungsanleitung

Meccano

Meccano 15103 Bedienungsanleitung

LEGO

LEGO TECHNIC 8735 Bedienungsanleitung

Mattel

Mattel HOTWHEELS DWL04 Bedienungsanleitung