Anschlussplan / Connection diagram
Improper work on electrical systems
People can be killed or seriously injured by electrocution.
Before working on electrical equipment, disconnect the power
supply and secure it from reconnection.
Only have qualified personnel perform work on electrical
systems.
Wear appropriate personal protective equipment.
Function
The supplied SENSORswitch may have options that deviate from
those shown in this manual. This does not affect the function.
The CHT3 is equipped with LEDs to indicate the operating states.
LED1 illuminates when ready for operation. LED2 illuminates when
actuated. Optionally, the SENSORswitch provides tactile or acoustic
feedback when actuated.
Installation
Prerequisites: The mounting surface is level and clean.
• Switch off the power supply to the system and secure against
reconnection.
• Determine the desired position of the SENSORswitch and provide a
centrically hole of at least Ø 50mm to max. Ø 58mm.
Please refer to the item description to see whether it
deals with an A or V-mounting.
• Place the SENSORswitch (B) in the A or V-mounting, align it
centred and vertical and mark the holes (C).
• Select the diameter of the holes according to the recommended
screw types and bore the holes.
• Connect the SENSORswitch (B) electrically according to the wiring
diagram.
• Mount the SENSORswitch (B) with the recommended screws. The
screw head may not deform the mounting flange (B).
Stecker / Connectors
Connector AMP 6.3, 4-pole
CHT3-_4_.........
Connector AMP 6.3, 4-pole
CHT3-_1_.........
Stecker JST 2,54, 4-polig
Connector JST 2.54, 4-pole
CHT3-_6_.........
Stecker JST 2,54, 5-polig
Connector JST 2.54, 5-pole
CHT3-_6_.........
Einzellitzen, 200 mm mit Aderendhülsen
(Aderendhülsen mit Kunststoffkragen DIN 46228 Leitungsquerschnitt
Litzen 0,25 mm²)
Strands, 200 mm with ferrules
(Ferrules with plastic collar to DIN 46228 cable cross section strands
0,25 mm²)
• Attach the colored cover ring
(A) with the groove (D) facing
down and press close to the
switch surface. The colored
cover ring must be flush with
the entire surface of the switch.
Maintenance
Perform the following maintenance activities in the specified intervals.
Cleaning the switch surface
Check cable for integrity
Check the screw connections for
tightness
X
Solvents contained in cleaning agents
may damage the plastic of the switch.
Clean the surface of the switch with a neutral cleaner or a
damp microfiber cloth.
Dismounting
• Switch off the power supply to the system and secure against
reconnection.
• Insert the slotted screwdriver into the groove (D) on the colored
cover ring (A) and lever off the colored cover ring with the
screwdriver.
• Remove the screwed connections and disconnect the electrical
connection.
Disposal
Electrical and electronic components of different types are to be
sorted according to the recycling process.
Connector M8, 4-pole
CHT3-_5_.........
Connector M8, 5-pole
CHT3-_5_.........
Connector M12, 4-pole
CHT3-_8_.........
Connector M12, 5-pole
CHT3-_8_.........
Overview graphic
Recommended screw types
Maximum allowed dimensions
All dimensions in mm
Technische Daten / Technical data
Betriebsspannung / Supply voltage
Ausgangsimpuls / Output signal
dynamisch / dynamic
statisch / static
Ca. 300 ms / Approx. 300 ms
Entspricht Betätigungsdauer
According activation period
Verpolungsschutz / Reverse
Kurzschlussschutz / Short-circuit
überlastsicher / Short-circuit
and overload protection
Spannungsabfall / Voltage drop
Stromaufnahme bei 24 V / Current
consumption at 24 V
mit Signalton / with acoustic signal
mit Vibration / with vibration
mit Signalton und Vibration /
with acoustic signal and vibration
Max. 30 mA
Max. 70 mA
Max. 130 mA
Max. 200 mA
Betriebstemperatur / Operating
temperature
dynamisch / dynamic
statisch / static
-30°C (-22°F)...+80°C (176°F)
0°C (32°F)….+55°C (131°F)
Schutzgrad IP / Degree of
Frontseite IP69K / Frontside
Betätigungsart / Type of operation
Betätigungskraft / Operation force
required
Optionen / Options
Mögliche erhabene Piktogramme
Possible raised pictograms
Farbvarianten / Avialable colours
Für mehr Informationen QR Code scannen
For more Information scan the QR code
oder besuchen Sie unsere Webseite www.cht3.captron.de
or show you on our website www.cht3.captron.com
CAPTRON Electronic GmbH
Johann-G.-Gutenberg Straße 7
82140 Olching
Germany
CHT3-1-BA_V1.0_de_en
