Caraudio-Systems R.LiNK RL-FD79-TF Bedienungsanleitung

Version 01.03.2019 RL-FD79-TF

r.LiNK-Interface

RL-FD79-TF

Rear view camera input

compatible with Ford and

Sony 8” MYFORD Touch Radios

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. This product should only

be used while standing or to display fixed menus or rear-view-camera video when the

vehicle is moving, for example the MP3 menu for DVD upgrades.

Changes/updates of the vehicle’s software can cause malfunctions of the interface. We

offer free software-updates for our interfaces for one year after purchase. To receive a free

update, the interface must be sent in at own cost. Labor cost for and other expenses

involved with the software-updates will not be refunded.

Version 01.03.2019 RL-FD79-TF

Page1"

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Check compatibility of vehicle and accessories

1.3. Dip-switch settings of the CAN-Box RLC-FO01-A modules

1.4. Pin-assignments

1.5. Connection schema

2. Installation

3. Rear-view camera connection

4. Activation of the video-in-motion function

5. Specifications

6. Technical support

1. Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The

place of installation must be free of moisture and away from heat sources.

1.1. Delivery contents

CAN-box RLC-FO01-A

HW_____ SW_____

Harness

TV-FS54

Take down the SW-version and HW-version of the interface-boxes, and store this

manual for support purposes!

CAN-box RLC-FO01-A

HW_____ SW_____

Version 01.03.2019 RL-FD79-TF

Page2"

1.2. Check compatibility of vehicle and accessories

Requirements

Vehicle Ford

2011 - 2014 Edge

2011 - 2014 Explorer

2012 - 2014 Focus

2013 - 2014 Focus ST

2013 - 2014 Taurus

2013 - 2014 Escape F-150

2013 - 2014 F-150 Raptor F-250

2013 - 2014 F-350

2013 - 2014 F-450

2013 - 2014 F-550

2013 - 2014 Fusion Hybrid

2013 - 2013 Fusion Energy

2013 - 2014 C-Max Hybrid

2013 - 2014 C-Max Energ

Navigation Sony 8” MYFORD Touch Radios

Limitations

Navigation While the video-in-motion function is active, the navigation will

not work!

Version 01.03.2019 RL-FD79-TF

Page3"

1.3. Dip-switch settings of the Can-Box RLC-FO01-A modules

Setting the Dip-switches of the Can-Box RLC-FO01-A connected on the 500KB 8Pin Molex

plug

Vehicle/ navigation

Dip 1

Dip 2

Dip 3

Dip 4

Dip 5

Dip 6

Video-in-motion permanent

OFF

Video-in-motion selective*

OFF

* With dip1 to OFF the included green cables are used to activate the video-in-motion

function.

Note: Dip switch functions of the RLC-FO01-A

Dip 1 – activation TV-free

Dip 2 – no function

Dip 3 – no function

Dip 4 – no function

Dip 5 – CAN-bus termination resistor on the vehicle side

Dip 6 – CAN-bus termination resistor on the head-unit side

Setting the Dip-switches of the Can-Box RLC-FO01-A connected on the 125KB 8Pin Molex

plug

Vehicle/ navigation

Dip 1

Dip 2

Dip 3

Dip 4

Dip 5

Dip 6

Video-in-motion permanent

OFF

Video-in-motion selective*

OFF

* With dip1 to OFF the included green cables are used to activate the video-in-motion

function.

Note: Dip switch functions of the RLC-FO01-A

Dip 1 – activation TV-free

Dip 2 – Rear-view camera activation

Dip 3 – no function

Dip 4 – no function

Dip 5 – CAN-bus termination resistor on the vehicle side

Dip 6 – CAN-bus termination resistor on the head-unit side

Version 01.03.2019 RL-FD79-TF

Page4"

1.4. Pin-assignments

Pin-assignment vehicle connector

Pin-assignment of the CAN-Box RLC-FO01-A (Molex 8pin)

Cable colour

Pin-No.

Assignment

● Yellow

Pin 4

CAN-HIGH – connection to the head-unit

● Blue

Pin 3

CAN-LOW – connection to the head-unit

●● Yellow/Black

Pin 8

CAN-HIGH – connection to the vehicle

●● Blue/Black

Pin 7

CAN-LOW – connection to the vehicle

● Red

Pin 1

+12V permanent

● Black

Pin 5

Ground

● Green

Pin 6

Activation of the video-in-motion function

(+12V = TV-free activated)

● White

Pin 2

Rear-view camera power output (+12V DC 500mA)

Note: White and red cinch plugs on the harness forward the factory AUX signal

and must therefore remain connected.

The open brown cable serve no function and must be isolated.

Assignment

+12Volt Permanent - Pin 1

Ground - Pin 37

CAN HIGH (500KB) - Pin 19

CAN LOW (500KB) - Pin 18

CAN HIGH (125KB) - Pin 16

CAN LOW (125KB) - Pin 17

Version 01.03.2019 RL-FD79-TF

Page5"

1.5. Connection schema

2. Installation

Switch off ignition and disconnect the vehicle’s battery! If according to factory rules

disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle is

sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a

resistor lead.

1. Remove the factory display to gain access to the factory 54-Pin connector.

Located behind the display, not the radio. Remove the factory 54-Pin connector.

2. Using the provided 54-Pin harness, mate both sides of the harness. To the factory harness

side and back into the radio side.

3. Connect the one RLC-FO01-A module to the 125kb 8-Pin connector and the other RLC-

FO01-A module to the 500kb 8-Pin connector on the provided harness (note: the RLC-FO01-

A modules are identical). Make sure all your connections are firmly inserted into each

module.

4. After connecting the modules, set dip switch number “6” to the “ON” position on both

modules. Make sure to match both modules for dip switch number 6.

5. With the harness and interface modules properly connected, turn the ignition to the “ON”

position. For Push-Start vehicles, simply press the button once to place the vehicle “ON”.

Version 01.03.2019 RL-FD79-TF

Page6"

6. When the radio powers up, turn the radio ON and select the FM Radio source. This step

simply helps in verifying the interface is corresponding with the radio.

7. While listening to the FM Source, place dip switch number “2” to the “ON” position on the

RLC-FO01-A module connected on the 125kb 8-Pin connector. Leave the RLC-FO01-A module

connected on the 500kb 8-Pin connector alone. The screen will power off and begin to reset.

8. Wait for the interface to reboot, the progress bar will show percentage completed. This

process may take up to 1 minute. Once completed the FM Radio Source will continue to play

as it was before the reboot.

9. With the Rear-View Camera disconnected, start the vehicle and place the vehicle into the

reverse gear. The radio display will prompt you with an error message of “Camera

Unavailable”. This verifies the coding was a success!

3. Rear-view camera connection

Connect the video RCA of the rear-view camera to the female RCA connector (RVC

input) of the TV-FS54 harness.

Connect the white cable from the 125kb 8-Pin connector of harness TV-FS54 to the

camera power supply (+12V, max 500mA). The white cable gets power when reverse

gear is engaged. By leaving the rear camera level the power is switch off again

Note: Only compatible with NTSC-cameras.

!"#$%&&

'()*+,-

.%"#)/0%123"4%#"

56789

:56(2#%"#)/0%123"4%#"

;<=><= ?4"@A2,BB4CD

Version 01.03.2019 RL-FD79-TF

Page7"

4. Activation of the video-in-motion function

The video-in-motion can be activated and deactivated by Dip 1 on both RLC-FO01-A modules

or alternatively by steering wheel buttons or over the loose green cables in connection with

a switch (not included in delivery).

Option 1: Video-in-motion permanent

With dip1 to ON on both RLC-FO01-A modules the video-in-motion function is activated

permanently. The navigation cannot be used.

Option 2: Video-in-motion selective (recommended for the use of navigation)

There are some vehicles that will allow you to activate the Video In-Motion through the

steering wheel controls (set on both RLC-FO01-A modules dip1 to OFF):

Option 3: Video-in-motion selective (recommended for the use of navigation)

With dip1 to OFF on both RLC-FO01-A modules the included green cables are used to

activate the video-in-motion function.

Connect a switch to the green cables and connect the green cables to +12V ACC.

● +12V = TV-Free is activated

● 0V = TV-Free is not activated

TYPE 1 - Seen on Ford Edge and C-Max.

Hold the BACK button (Left Arrow) for 3

seconds to activate the Video In-Motion.

To deactivate - Repeat the step above.

TYPE 2 - Seen on Ford F-Series vehicles.

Hold the PHONE button (OK) for 4

seconds to activate the Video In-Motion.

To deactivate - Repeat the step above.

Version 01.03.2019 RL-FD79-TF

Page8"

5. Specifications

Operation voltage 10.5 – 14.8V

Stand-by power drain <2mA

Operation power drain ~60mA

Power consumption ~0,08W

Temperature range -30°C to +80°C

Weight 44g

Measurements (box only) W x H x D 76 x 27 x 54 mm

6. Technical support

Caraudio-Systems Vertriebs GmbH

manufacturer/distribution

In den Fuchslöchern 3

D-67240 Bobenheim-Roxheim

email [email protected]

Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered

trademarks ® of their corresponding legal owners.

Inhaltsverzeichnis

Andere Caraudio-Systems Autozubehör Handbücher

Caraudio-Systems

Caraudio-Systems usbLOGiC USB-E65-TV Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems OBD-ASK-CDC Series Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems OBD-CIC-CDC Series Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems MD-VW01 Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems CI-RL4-MIB101 Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems TF-NTG3 Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems TF-UCON52 Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems usbLOGiC USB-NTG1 Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems TV-Free TF-FSYNC54 Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems r.LiNK-Interface Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems OBD-E65-CDC Series Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems TV-Free TF-MFD2 Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems CI-TF-NTG5 Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems TF-LR17 Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems OBD-BM-X-01 Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems TF-MMI Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems MD-VW03 Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems r.LiNK RL-PCM3-2-TF Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems OBD-CCC-CDC-01 Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems RL-MZ72D Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems C2-MK-CD Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems TF-U501 Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems TF-LR15 Bedienungsanleitung

Caraudio-Systems

Caraudio-Systems c.LOGiC C2-E65-TV Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Caraudio-Systems r.LiNK RL-FD79-TF Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken