Carrier RBC-AMS54E-UL Bedienungsanleitung

Manuel d’installation 31

Français

Installation Manual 1

English

Manual de instalación 61

Español

Model name:

RBC-AMS54E-UL

• Read this manual before using the RBC-

AMS54E-UL remote control.

• Refer to the Installation Manual supplied with the

indoor unit for any installation instructions other

than operations of the remote control.

Wired Remote Control

Installation Manual

– 1 –

Installation Manual

Contents

Precautions for Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Accessory Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Requirements to install the remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Install the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Wire the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Requirements for wiring of group control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Requirements for installing two remote controls . . . . . . . . . . . . . . . . . . . . . . . . . . 7

For first use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Monitor screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Initial setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1. Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2. Name of room. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3. Screen contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

4. Backlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5. Key lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

6. Header/Follower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

7. Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

8. Press & hold 4sec. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Field setting menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

1. Test mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

2. Register service info.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3. Alarm history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

4. Monitor function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5. Setting louver position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

6. Setting timer operation mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

7. DN setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

– 2 –

Installation Manual

Precautions for Safety

• Read these “Precautions for Safety” carefully before installation.

• The precautions described below include important items regarding safety. Observe them without fail.

Understand the following details (indications and symbols) before reading the body text, and follow the

instructions.

• Ask customer to keep this Manual at accessible place for future reference.

Indication Meaning of Indication

WARNING Text set off in this manner indicates that failure to adhere to the directions in the warning could result in

serious bodily harm (*1) or loss of life if the product is handled improperly.

CAUTION Text set off in this manner indicates that failure to adhere to the directions in the caution could result in

minor bodily injury (*2) or damage (*3) to property if the product is handled improperly.

*1: Serious bodily harm indicates loss of eyesight, injury, burns, electric shock, bone fracture, poisoning, and other

injuries which leave aftereffect and require hospitalization or long-term treatment as an outpatient.

*2: Bodily injury indicates injury, burns, electric shock, and other injuries which do not require hospitalization or long-

term treatment as an outpatient.

*3: Damage to property indicates damage extending to buildings, household effects, domestic livestock, and pets.

Symbols Meaning of Symbols

“ " Indicates prohibited items.

The actual contents of the prohibition are indicated by a picture or text placed inside or next to the graphic

symbol.

“ " Indicates compulsory (mandatory) items.

The actual contents of the obligation indicated by a picture or text placed inside or next to the graphic

symbol.

WARNING

•Only a qualified installer or service person is allowed to do installation work.

Inappropriate installation may result in water leakage, electric shock or fire.

•Perform installation work properly according to the Installation Manual.

Inappropriate installation may result in water leakage, electric shock or fire.

•Electrical work must be performed by a qualified electrician in accordance with this

installation manual.

The work must satisfy all local, national and international regulations.

Inappropriate work may result in electric shock or fire.

•Use predefined wire and connect them certainly. Keep the connecting terminal free from

external force.

Improper wire connection or clamping may result in exothermic, fire or malfunction.

– 3 –

Installation Manual

Accessory Parts

No. Part name Quantity

(1)

Screws

ĭ0.16" × 0.79"

(M4×20 mm)

(2)

Wood screws

ĭ0.15" × 0.63"

(M3.8×16 mm)

(3) Owner’s Manual 1

(4) Installation Manual

(This manual) 1

– 4 –

Installation Manual

Installation

Requirements to install the remote control

◆Installation place

• Install the remote control at a height of 3'3" to 4'9" from the floor so that the average temperature in the room can

be detected.

• Do not install the remote control in a place exposed to direct sunlight or direct outside air, such as the side of a

window.

• Do not install the remote control in a place behind something or to the rear side of an object, where air flow is

not sufficient.

• Do not install the remote control in a freezing box or refrigerator, as the remote control is not waterproof.

• Install the remote control vertically to the wall.

◆Installation dimension

Room temperature

sensor

4.72"

0.78"

4.72"

Unit : in

4-Ø0.17"×0.31" slotted hole

0.94"

0.86"

1.65"

– 5 –

Installation Manual

◆Remote control wiring and inter-unit wiring between indoor units

Do not allow the wire for the remote control (communication wire) and the wire for AC208/230 V to come into

contact or put them together in one electrical conduit; otherwise, the control system may have trouble due to noise.

* Varies depending on the type of remote control used.

◆Installation of multiple remote controls

To install two or more adjacent remote controls, follow the instructions in the Fig. 1 and 2.

Wiring type AWG20 to AWG14 x 2

Total length of remote control wiring

and inter-wiring between indoor units

(L+L1+L2+...Ln)

1 remote control 2 remote controls 2 remote controls including

a wireless remote control

Up to 1640 ft (500 m) Up to 980 ft (300 m) Up to 1310 ft (400 m)

Total length of inter-wiring between

indoor units

(L1+L2+...Ln)

Up to 660 ft (200 m)

Indoor

unit

Indoor

unit

Indoor

unit

Indoor

unit

Remote control wiring

L1 L2 Ln

(Up to 8 units)

Remote

control

Remote control inter-units

wires for group control.

Wall

1.30" or more

(from a wall)

0.80" or more

(when adjacent remote

controls are installed)

(Fig. 1)

1.30" or more

(from a wall)

0.80" or

Wall

(Fig. 2)

1.95" or

3.45" or

2.00" or

– 6 –

Installation Manual

Install the remote control

NOTE

• Wiring for the remote control should not be bundled or installed in the same conduit with a power cable.; otherwise,

malfunction may result.

• Install the remote control away from sources of electrical interference and electromagnetic fields.

1Insert a flat-blade screwdriver into the groove on the back side of the remote control to remove

the rear case.

2Use the wood screws (2 pieces) supplied with the remote control to attach the rear case of the

remote control to the wall.

Do not use an electrical screwdriver. Do not over-tighten the screw (Tightening torque is up to

1.5 ft•lbs); otherwise, the rear case may be damaged.

3Connect the electrical wire from the indoor unit to the terminal block of remote control.

(Refer to “Page 7 Wire the remote control”.)

Check the terminal number of electrical wire from the indoor unit to avoid miswiring.

(If AC 208/230 V is applied, the remote control and indoor unit will break down.)

Rear case

Remote

control

Wood screw x 2

Wall

– 7 –

Installation Manual

Wire the remote control

Wiring diagram

Terminal block for the remote control wiring on the indoor unit

Requirements for wiring of group control

To make wiring of group control for indoor units of 4-way cassette type and other types, set the 4-way cassette type

as the header unit; otherwise, some settings such as the individual louver setting are not available.

Requirements for installing two remote controls

In the dual remote control system, one or more units are operated from two remote controls. (Up to two remote

controls can be installed.)

Set the Follower remote control

Set from “6. Header/Follower” in “Initial setting” on the MENU screen.

For details, refer to the page 17.

Install the remote controls

For the dual remote control system, install the remote controls as follows:

1Set one remote control as the Header remote control.

(The remote controls are set as “Header remote control” as factory default.)

2When the dual remote control system is installed by using this remote control (RBC-AMS54E-UL)

with the other type of remote control, set this remote control as the Header remote control.

Remote control wiring (procured locally)

Terminal block for

the remote control

wiring

Remote control

* Terminals of A and B

have no polarity.

* Use wire of AWG20 to AWG14.

* A crimp-style terminal cannot be used.

– 8 –

Installation Manual

Basic wiring diagram

NOTE

Terminals of A and B have no polarity.

To diverge from the indoor unit To diverge from the Header remote control

To operate a group control of multiple indoor units by two remote controls

* The Header or Follower remote control can be connected to any indoor unit.

Remote control

(Header) Remote control

(Follower)

(Sold

separately)

Terminal block

for the remote

control wiring

Ground

Indoor unit

Remote control wiring

(Locally procured)

AWG20 to AWG14.

A B A B

A B

Remote control wiring

(Locally procured)

AWG20 to AWG14.

Remote control

(Header) Remote control

(Follower)

(Sold

separately)

Terminal block

for the remote

control wiring

Ground

Indoor unit

A B A B

A B

Remote control inter-unit wires for group

control (Locally procured)

Remote control

(Header) Remote control

(Follower)

(Sold

separately)

Terminal block for the

remote control wiring

Ground

Indoor unit

No.1

Ground Ground Ground

Indoor unit

No.2

Indoor unit

No.3

Indoor unit

No.8

A B

A BA BA B

– 9 –

Installation Manual

For first use

It takes some time before the remote control becomes operable when the remote control is used for the first time.

This is not a malfunction.

It takes about 5 minutes before the remote control becomes operable.

It takes about 1 minute before the remote control becomes operable.

Note

For the operation of switching the room temperature sensor or the settings of the test operation, refer to the page

20.

Power on “ ” flashes “ ”

disappears

Remote control becomes

operable.

About 5

minutes

Power on “ ” flashes “ ”

disappears

Remote control becomes

operable.

About 1

minute

Andere Handbücher für RBC-AMS54E-UL

Inhaltsverzeichnis

Andere Carrier Fernbedienung Handbücher

Carrier

Carrier 40KMC Bedienungsanleitung

Carrier

Carrier HDB Bedienungsanleitung

Carrier

Carrier TruVu UC683T Installationshandbuch

Carrier

Carrier NTC Bedienungsanleitung

Carrier

Carrier Aquasnap Plus 33AW-RC1 Bedienungsanleitung

Carrier

Carrier RG56V Series Bedienungsanleitung

Carrier

Carrier RG10L1/BGEF Bedienungsanleitung

Carrier

Carrier Infinity SYSTXCCRWF01 Bedienungsanleitung

Carrier

Carrier Infinity series Bedienungsanleitung

Carrier

Carrier RG66B3/BGEF Bedienungsanleitung

Carrier

Carrier RG10B2/BGEF Bedienungsanleitung

Carrier

Carrier RG56/BGEF-CA Bedienungsanleitung

Carrier

Carrier SYSTXCCITW01-A Infinity Bedienungsanleitung

Carrier

Carrier OSK102 Bedienungsanleitung

Carrier

Carrier 33CSPGMR-01 Bedienungsanleitung

Carrier

Carrier RG67V/BGEF Bedienungsanleitung

Carrier

Carrier RG67N/BGEF Bedienungsanleitung

Carrier

Carrier AQUASNAP Bedienungsanleitung

Carrier

Carrier RBC-AMS54E-UL Fehlerbehebungshandbuch

Carrier

Carrier 40KMC Bedienungsanleitung

Carrier

Carrier AQUASNAP PLUS Bedienungsanleitung

Carrier

Carrier RG10L/BGEFU1 Bedienungsanleitung

Carrier

Carrier rg05 Bedienungsanleitung

Carrier

Carrier AQUASMART Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung