Cateye Padrone Smart CC-PA500B Bedienungsanleitung

SMART COMPUTERS USER'S GUIDE

Outline

Before Use (Quick Start)

Operating Instructions

Frequently Asked Questions

CONNECT with your SMARTPHONE

CC-PA500B

The Bluetooth word mark and logos are owned by

Bluetooth SIG, Inc. and any use of such marks by

CATEYE Co., Ltd. is under license. Other trademarks

and trade names are those of their respective owners.

PADR

MAR

CC-RD500B

TRADA

MAR

Outline SMART COMPUTER P. 1 OUTLINE

GPS

SENSORS

Sensor Direct ModeMirror Mode

zDISPLAY

zTWO MODES

2WAY

- Data from smartphone is sent to the Smart computer where

you can view it.

- GPS signal to the smartphone measures Speed and Altitude.

- Optional Bluetooth® Smart sensors record Speed, Cadence,

Heart Rate and Power.

- Displays Call/Email/SMS(Text) alert on the Smart computer.

- Allows sensors to be connected directly to the Smart computer

for measurement. This is useful for races and other situations

when you will not use a smartphone.

- Measurement data stored in Smart computer can be managed

via smartphone after your ride.

zMODE OPTIONS

Device used for measurement

and recording

*Summary : Ride date and time, Elapsed time, Trip distance, Average and Maximum values of each measurement

*Smartphone

GPS

*Smartphone

GPS

*Padrone

only

*Padrone

only

*Smartphone

GPS

Measuring,Displayed

Speed Altitude

Cadence,Heart Rate,

Power

SMS

(Text)

Call Email Map Graph Summary

Notification Record

Mirror mode

Smartphone

Mirror mode

Smartphone + sensors

Sensor direct mode

Sensors

Comparison between average speed

and current speed

Turns on when there is insufficient memory

for summary data

Bottom row display

Flashes when an incoming

call / email / SMS(Text) is

received

Turns on in mirroring mode

Flashes when smartphone

battery is low

Flashes when the computer battery is low

Sensor reception status

Speed: S

Cadence: C

Hear rate: H

Power: P

LED turns on when an incoming

call/email is received

Bottom row display

Average

Maximum

Total Distance

Elapsed Time

Altitude

Trip Distance 1

Trip Distance 2

Clock

Before Use SMART COMPUTER P. 2 BEFORE USE

STEP 2 - Device operation

STEP 1 - Smartphone operation

Smart computer and Bluetooth Smart Sensors ("smart sensors") must be paired with a

smartphone ﬁrst.

When the smartphone discovers a device, a pop-up appears.

Tap "Pairing" to complete pairing.

*If you are using PADRONE SMART with an iPhone, a subsequent

message will be displayed. Tap ”Pair” again.

- Smart computer

Press and hold the MODE button for 1 second

to start smartphone search mode

1. Register devices (pairing)

- Speed/cadence (ISC) sensor

Move magnet close to sensor zone several

times (within 3 mm) to send signal

- Heart rate sensor

Rub both electrode pads with thumbs

to send signal

Device > Device Pairing

The smartphone starts searching for devices.

１S

SMART COMPUTER P. 3 BEFORE USE

The following Smart computer-related settings are congured automatically by the smartphone:

zTime - Adjusted every time the computer connects to the smartphone

zUnit (km/mile) - Synced with app unit settings

zRegistering smart sensors for use with sensor direct mode

- Smart sensors synced with mirror mode smart sensors that are registered in the app.

Other Smart compouter-related settings

Conﬁgure the Display Customization, Odometer, and

Clock (12h/24h) settings via the following procedure:

2. Conﬁgure Smart computer

Device > CYCLOCOMPUTER

The Smart computer and smart sensors displayed in Device ,

can also be used in sensor direct mode.

* Only possible when the cyclocomputer is connected to a smartphone

Can be used with CC-1 in

sensor direct mode

NOTE

Smart sensor

Mirror Mode

Smartphone

(Parent device in

mirror mode)

Smart computer

(Parent device in sensor direct mode)

Sensor Direct Mode

(1) Smart sensor paired

with smartphone

(2) Smart sensor information from smartphone

automatically registered in Smart computer

(3) Smart sensor and Smart computer

can be connected

Smart

sensor

Registered

* Smart sensors cannot be paired with multiple parent devices at the same time.

To use a smart sensor, it must rst be registered (paired)

with a parent device. However, because a smart sensor

that has been registered in a smartphone is also automati-

cally registered in the connected Smart computer , there is

no need to pair the smart sensor with the Smart computer.

Smart

sensor

Registered

Connects to smartphone and

switches to mirror mode if a

smartphone is detected

Smartphone search screen

Ride data stored in Smart computer

Reset

* The screen will change after 1 second,

but keep holding down the button.

* The screen will change after 1 second,

but keep holding down the button.

INo. of trips stored via reset

Ride data stored in app

Ride data for each reset is saved and uploaded

consecutively to the activity list.

Sensor Direct Mode

Mirror Mode

1 s

3 s

1 s

READY

Click

Switch bottom

row display

Click

Switch bottom

row display

RECORDING

READY

PAUSE

* Orange indicates ﬂashing area

Operating Instructions SMART COMPUTER P. 4 OPERATING INSTRUCTIONS

Reset

Frequently Asked Questions SMART COMPUTER P. 5 FAQ

- How do I check what I've recorded in sensor direct mode?

- How can I make the notiﬁcation icon on the Smart computer disappear?

- Why isn't all my ride data displayed on the Upload screen?

- When can I connect the Smart computer / a smart sensor to a smartphone?

- How can I disconnect the smartphone from Smart computer or a smart sensor?

Devices can be disconnected from the smartphone.

If you return the Smart computer to sensor direct mode after disconnecting it,

the Smart computer and the smart sensor will connect directly to each other

and be ready for use.

ON OFF

Connect

When the app is active (including when the screen is in sleep mode), as long as is set to , the smart-

phone will constantly search for paired devices. The Smart computer can be connected when it is in smartphone search

mode. Smart sensors can be connected simply by sending a signal.

If the connection between the smartphone and the device is cut o due to noise or distance, they will switch to search mode

and automatically reconnect.

Connect

You can check ride data from sensor direct mode that is stored in the

Smart computer by moving it to the app.

* When the Smart computer is connected to the smartphone and data is

saved on the Smart computer, an icon appears.

* When the import nishes, ride data in the Smart computer is automatically

deleted.

Activity List > Import from CC

The icon is deleted each time you pause a trip, regardless of whether or not you have checked emails , calls or SMS(Text).

* Email notications must be congured under Device > CYCLOCOMPUTER .

Only ride data that has not been uploaded to CATEYE Atlas, STRAVA, or Training Peaks is displayed. If you want to

upload ride data that you have already uploaded to a dierent site, do so individually from the Activity List.

* When uploading data from the Upload screen, the app will start uploading data to the websites that are set to

ON on the Account screen.

SMART COMPUTER P. 6 FAQ

- What should I do if I see a message saying "CC and iPhone have different

settings. Which settings do you want to use?"

* It is recommended that you conﬁgure these settings from the app when the smartphone is connected to the Smart computer.

(This way, changes will be written to the Strada immediately, and the pop-up will not appear the next time you connect.)

Example:

ISC-A1:

2096mm

Changed to

2068 mm

ISC-A1:

2096mm

ISC-A1:

2068mm

ISC-A1:

2068mm

mile

JChanged

to km

mile km km

ISC-A1

+HR-A1

added

Registered Registered

ISC-A1

Registered

ISC-A1

HR-A1

Registered

ISC-A1

HR-A1

Heart rate information disappears,

so sensor must be paired again.

iPhone selected

CC selected

iPhone selected

Registered Registered

ISC-A1

+HR-A1

added

ISC-A1

+ISC-C1

added

ISC-A1

ISC-C1

Registered Registered

ISC-A1

ISC-C1

This message appears when the smartphone is not connected to the Smart

computer, and units and smart sensor information have been updated on one of

the devices. Select the information that you want to sync.

SMART COMPUTER P. 7 FAQ

- Why doesn't my smart sensor connect to the Smart computer in sensor direct

mode even though it's registered in the app?

- Why is uploaded ride data displayed as "Uploaded" in the app even though

I've deleted it from a website?

- What should I do if I can't connect my smartphone with a device or if Smart

computer operation is abnormal?

The app displays whether data has been uploaded in the past.

It is not possible to tell whether or not data has been deleted

from a website. It is possible to re-upload data that is displayed

as "Uploaded."

Restart the smartphone and try connecting again.

If this does not resolve the problem, try restarting Smart computer as well.

If an update mark is displayed instead of a map, the map will be reloaded and displayed again when you open the activity.

* Depending on the quality of the communication environment and the performance of the smartphone, thumbnails may

continue to be displayed incorrectly in some cases.

a. In some cases, smart sensor information may not have been added to Smart computer. Connect the Smart computer

to the smartphone, and when a message saying "Which settings do you want to use?" appears, tap "iPhone".

b. Some commercial smart sensors need to be separately paired directly with the Smart computer unit.

c. The smart sensor may be connected to the smartphone. Smart sensors cannot be paired with multiple devices

at the same time. To use sensor direct mode, either set Connect to , or quit the app completely.

OFF

a. b. c.

- Why aren't thumbnails displayed for maps in the Activity List?

Tap to reload

Restart procedure

SMART COMPUTER P. 7 FAQ

Please check to see if your smartphone model is compatible before you purchase.

Cateye Cycling Recommended Device/Email Program ListWeb manual

For detailed operating instructions and device installation instructions, refer to the web manual.

What do smart sensor names mean?

ISC - A 1

(1) (2) (3)

Speed + cadence sensor: ISC

Heart rate sensor: HR

Power sensor: PWR

Sensor paired with app: A

Sensor paired with cyclo computer: C

(1):

(2):

(3): Group number for pairings where conditions (1) and (2) are

identical (maximum of 9)

As measurement relies on the smartphone's GPS function, there may be a dierence between the measured

ascending altitude and the actual ascending altitude.

- Why is there variation in measurement values for ascending altitude?

The smartphone may take a while to acquire GPS in some cases, so it may not be possible to start measurement

without a sensor immediately in some cases. Wait somewhere outdoors for a while before starting.

- Why can't I measure speed even though measurement has started?

- Why do I sometimes ﬁnd Smart computer in sleep mode when I go back to my bike?

When the smartphone moves away from the bicycle even for a short time,

Smart computer may automatically enter sleep mode. Clicking Smart computer

will make it enter smartphone search mode, allowing you to reconnect.

Sleep mode

Andere Handbücher für Padrone Smart CC-PA500B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cateye Fahrradzubehör Handbücher

Cateye

Cateye CC-TR200DW (V2c) Bedienungsanleitung

Cateye

Cateye SINGLE SHOT HL-EL600RC Bedienungsanleitung

Cateye

Cateye CC-MC100W Bedienungsanleitung

Cateye

Cateye RAPID X TL-LD700-R Bedienungsanleitung

Cateye

Cateye Enduro CC-ED400 Bedienungsanleitung

Cateye

Cateye CC-PA100W Bedienungsanleitung

Cateye

Cateye Air GPS Bedienungsanleitung

Cateye

Cateye TL-LD1000 Gebrauchs- und Pflegehandbuch

Cateye

Cateye PADRONE DIGITAL CC-PA400B Bedienungsanleitung

Cateye

Cateye Stealth EVO+ CC-GL51 Gebrauchsanweisung

Cateye

Cateye CC-MT200 Bedienungsanleitung

Cateye

Cateye Bicycle Accessories Bedienungsanleitung

Cateye

Cateye STRADA CC-RD100N Bedienungsanleitung

Cateye

Cateye Micro wireless CC-MC200W Bedienungsanleitung

Cateye

Cateye CC-VT100W Bedienungsanleitung

Cateye

Cateye CC-PA100W Bedienungsanleitung

Cateye

Cateye OS 1.1 Bedienungsanleitung

Cateye

Cateye CC-VL500 Bedienungsanleitung

Cateye

Cateye STEALTH EVO Bedienungsanleitung

Cateye

Cateye OS 1.0 Bedienungsanleitung

Cateye

Cateye PADRONE SMART Bedienungsanleitung

Cateye

Cateye TL-LD120-F Bedienungsanleitung

Cateye

Cateye MSC 2DX Gebrauchsanweisung

Cateye

Cateye STRADA Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken

Sigma

Sigma BC 16.16 Bedienungsanleitung

Playcore

Playcore Dero Setbacks Bedienungsanleitung

VDO Cyclecomputing

VDO Cyclecomputing x3dw Bedienungsanleitung

buratti meccanica

buratti meccanica Clorofilla Trail Bedienungsanleitung

Shimano

Shimano SG-8R20 Betriebsanleitung

BOB

BOB YAK Bedienungsanleitung

APLIC

APLIC 303303/20190717TW012 Bedienungsanleitung

SRAM

SRAM AXS BlipBox Bedienungsanleitung

Garmin

Garmin EDGE 500 Bedienungsanleitung

Shimano

Shimano FD-RX810 Bedienungsanleitung

KMART

KMART 43115907 Bedienungsanleitung

SIGMA SPORT

SIGMA SPORT Buster 2000 Bedienungsanleitung

NVO Components

NVO Components STEM Bedienungsanleitung

DAXYS

DAXYS BP188 Bedienungsanleitung

XLC

XLC BV-W17 Bedienungsanleitung

Deda Elementi

Deda Elementi SUPERBOX Bedienungsanleitung

Key-Disp

Key-Disp KD31M Bedienungsanleitung

SiliconCoach

SiliconCoach Dialed in Motion Bedienungsanleitung