CB2 HEYDAY Bedienungsanleitung

Made in China - r11 Page 1 of 4

heyday LOW DRESSER

hardware

components - box 1

tools required

Thank you for purchasing the Heyday Low Dresser.

This page

lists all the contents included in the box. Please

take the time

to identify the hardware as well as the

individual components

to this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

Missing hardware?

Please call 800.606.6387 for replacements.

(We recommend the use of hand tools instead of power tools)

2 - side panels

(1 left, 1 right)

12 - wood

dowels

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

1 - partition

(glides on both

sides)

1 - back

panel

1 - top

panel

1 - bottom

panel

4 - drawer

fronts

4 - left drawer

sides

4 - drawer

bottoms

4 - right drawer

sides

4 - drawer

backs

4 - legs

(2 left, 2 right)

1 - support

leg

6 - cam

screws

6 - cams 12 - leg

screws

32 - medium

screws

15 - large

screws

phillips head screwdriver

6 - cam

covers

16 - small

screws

components - box 2

A. Insert 2 cams and 4 wood dowels into left and

right side panel as shown. Make sure arrows on

each cam points toward nearest edge with holes.

B. Insert 2 cams and 4 wood dowels into

partition.

heyday LOW DRESSER

Made in China - r11 Page 2 of 4

1 2

left and right

side panels

NOTE: Make sure arrows

on each cam points toward

nearest edge with holes

partition

Insert 6 cam screws into top panel as shown.

Secure, but do not over tighten, screws with a

phillips head screwdriver.

top

panel

NOTE: Do not

over tighten

the cam screws

Attach back panel to assembled unit with 3 large

screws per side panel as shown. Secure, but do

not over tighten the screws with a screwdriver.

With assistance of another adult, fit dowels of

partition and left/right side panels into

corresponding holes of top panel as shown. Make

sure glides pull out away from the grooves on top

panel and cams are oriented as shown. Secure all

cams.

NOTE: Make sure glides

pull out away from grooves

of top panel and cams are

oriented as shown NOTE: Do not

over tighten the screws

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

right side

panel

left side

panel

top

panel

partition right side

panel

left side

panel

back

panel

heyday LOW DRESSER

Made in China - r11 Page 3 of 4

A. With the assistance of another adult, fit dowels

and back panel of assembled unit into corresponding

groove of bottom assembly as shown. At this point,

secure bottom assembly with 9 large screws as

shown, using a screwdriver.

B. At this point, cover all exposed cams with cam

covers.

NOTE: Do not

over tighten

the screws

A. Attach 4 left/right legs to bottom panel with 3

leg screws per leg as shown. Secure screws with

a screwdriver.

B. Attach support leg to bottom panel. Turn

support clockwise to secure.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Attach drawer left side to drawer front assembly

with 2 medium screws and secure using a

screwdriver as shown. Make sure the angled side

is towards the drawer front assembly, and

grooves on sides and drawer front are aligned.

bottom

assembly

bottom

panel

support

leg

left side

legs

right side

legs

Slide drawer bottom into grooves of drawer

assembly as shown.

drawer

bottom

drawer front

assembly

drawer

left side

NOTE: Make sure the angled

side is towards the drawer front

assembly, and grooves on sides

and drawer front are aligned.

SIDE VIEW

drawer

left side

drawer front

cleaning & care

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as

the unit is finished with a protective clear lacquer. It is

recommended to use coasters to protect surface from

heat and water.

heyday LOW DRESSER

Made in China - r11 Page 4 of 4

9 10

Attach drawer right side to the drawer assembly

with 4 medium screws as shown.

Repeat steps 7-10 for remaining drawer

assemblies.

Attach drawer back with 2 medium screws as

shown.

A. Fully extend drawer glides from assembled unit.

B. Position and rest the drawer assembly on top of

tabs of drawer glides as shown. Secure each glide

to drawer with 2 small screws as shown, using a

screwdriver.

Repeat step 11 for remaining drawer assemblies.

Assembly is now complete.

drawer

assembly

Customer Service 800.606.6252 I Latest instructions available at www.cb2.com

drawer

back

drawer

right

side

Inhaltsverzeichnis

Andere CB2 Inneneinrichtung Handbücher

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung