CB2 WALNUT Bedienungsanleitung

Made in Vietnam - r04 Page 1 of 5

walnut LOW DRESSER

hardware

components

tools required

Thank you for purchasing the Walnut Low Dresser.

This page

lists all the contents included in the box.

Please take the time

to identify the hardware as well as

the individual components

to this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

Missing hardware?

Please call 800.606.6387 for replacements.

(We recommend the use of hand tools instead of power tools)

1 - top panel 1 - bottom panel 1 - partition1 - back panel

4 - large drawer

sides (2 right, 2 left)

4 - drawer bottoms 4 - pulls

2 - side panels

(1 right, 1 left)

2 - small drawer

fronts (1 right, 1 left)

2 - large drawer

fronts (1 right, 1 left)

2 - large drawer

backs

2 - small drawer

backs

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

phillips head screwdriver

32 - screws 8 - large

bolts

8 - small

bolts

9 - medium

bolts

12 - wood

dowels

9 - flat

washers

9 - spring

washers

6 - cam

screws

6 - cams

4 - legs

1 - center

support

4 - small drawer

sides (2 right, 2 left)

walnut LOW DRESSER

Made in Vietnam - r04 Page 2 of 5

A. Insert 4 wood dowels and 2 cams into

partition as shown. Make sure arrow on each cam

point toward nearest edge with holes.

B. Insert 4 wood dowels 2 cams into right and

left side panels as shown.

A. Attach 4 legs to bottom panel with 2 small

bolts per leg as shown. Secure, but do not over

tighten, bolts with a phillips head screwdriver.

B. Insert support leg to bottom panel. Turn

clockwise to secure.

NOTE: Do not

over tighten

the bolts

Insert back panel into grooves of side panels and

bottom panel as shown.

A. Position bottom panel upright. Fit dowels of side

panels and partition into bottom panel as shown.

B. Using a screwdriver, secure side panels and

partition with 9 medium bolts, 9 spring washers

and 9 flat washers.

NOTE: Make sure arrow

on each cam points

toward nearest edge

with holes

side panel

partition

NOTE: Make sure

grooves of side/bottom

panels are assembled

on the same side

during assembly

NOTE: Make sure the

drawer glides pull out away

from back grooves of side/bottom

panels during assembly

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

walnut LOW DRESSER

Made in Vietnam - r04 Page 3 of 5

Insert 6 cam screws into top panel as shown.

Secure, but do not over tighten, the cam screws

with a screwdriver.

A. Attach left small drawer side to small

drawer front with 2 screws as shown. Secure,

but do not over tighten, screws with a screwdriver.

B. Insert drawer bottom into grooves of small

drawer front and side as shown.

A. Attach left small drawer side to small drawer

back with 2 screws as shown.

B. Attach right small drawer side to small

drawer front and back with 4 screws as shown.

NOTE: Do not

over tighten

the screws

NOTE: Do not

over tighten

the cam screws

With the assistance of another adult, fit dowels of

assembly into top panel as shown. Using a

screwdriver, turn each cam clockwise until it

securely engages each cam screw.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

910

11 12

walnut LOW DRESSER

Made in Vietnam - r04 Page 4 of 5

Attach 1 pull to small drawer front with 2 large

bolts as shown, using a screwdriver.

Repeat steps for remaining small drawer assembly.

A. Attach left large drawer side to large drawer

front with 2 screws as shown.

B. Insert drawer bottom into grooves of small

drawer front and side as shown.

A. Attach left large drawer side to large drawer

back with 2 screws as shown.

B. Attach right large drawer side to large drawer

front and back with 4 screws as shown.

Attach 1 pull to large drawer front with 2 large

bolts as shown, using a screwdriver.

Repeat steps for remaining large drawer assembly.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

walnut LOW DRESSER

Made in Vietnam - r04 Page 5 of 5

With the assistance of another adult, position unit upright. Fit drawer glides of drawer into corresponding

drawer glides of assembly as shown. Firmly push drawer into assembly until the glides are securely engaged.

Assembly is now complete.

cleaning & care

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as

the unit is finished with a protective clear lacquer. It is

recommended to use coasters to protect surface from

heat and water.

NOTE: Make sure to

insert right drawers to

the right side, and left

drawers to the left side

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Inhaltsverzeichnis

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung