CB2 CADET Bedienungsanleitung

Made in Thailand- r04 Page 1 of 5

cadet CABINET

assembly hardware

wall mounting hardware

components

Thank you for purchasing the Cadet Cabinet. This

page

lists all the contents included in the box. Please

take the time

to identify the hardware as well as the

individual components

to this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

tools required phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

1 - top

panel

18 - cam

screws

8 - large

cams

Missing hardware?

Please call 800.606.6387

for replacements.

1 - back

panel

24 - wood

dowels

10 - small

cams

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

1 - bottom

panel

1 - fixed

shelf

2 - legs2 - side panels

(1 left, 1 right)

4 - pull

bolts

16 - hinge

screws

4 - medium

screws

4 - bumpers

2 - wall

straps

2 - plastic

anchors

18 - cam

covers

2 - medium

screws

2 - small

screws

6 - large

screws

2 - adjustable

shelves

2 - pulls

2 - doors

4 - hinges 8 - shelf

pins

cadet CABINET

Made in Thailand - r04 Page 2 of 5

Insert 4 wood dowels, 2 large cams,6cam

screws into left side panel as shown. Secure, but

do not over tighten, cam screws with a phillips

head screwdriver. Make sure arrows on each cam

points toward nearest edge with holes.

Repeat steps for right side panel.

Customer Service 800.606.6252 | Latest instructions available at

3 4

Insert 10 small cams and 12 wood dowels into

back panel as shown.

A. Insert 6 cam screws into top panel as shown.

B. Insert 4 wood dowels and 4 large cams into

fixed shelf as shown.

Fit dowels of back panel and fixed shelf into

corresponding holes of right side panel as shown.

Using a screwdriver, turn each cam clockwise until

it securely engages each cam screw.

right side

panel

back

panel

fixed

shelf

left side

panel

NOTE: Make sure

arrows on each

cam points toward

nearest edge with

holes

NOTE: Do not

over tighten the

cam screws

back

panel

top

panel

fixed

shelf

NOTE: Make sure cams

of back and right side panel

are oriented towards the

top as shown

cadet CABINET

Made in Thailand - r04 Page 3 of 5

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

7 8

A. Fit dowels of assembled unit into corresponding

holes of top panel as shown. Secure all cams.

B. Cover all exposed cams with cam covers.

Fit dowels of assembled unit into bottom panel as

shown. Secure, but do not over tighten, bottom

panel with 6 large screws using a screwdriver.

With assistance of another adult, fit dowels of

assembled unit into corresponding holes of left

side panel as shown. Secure all cams.6

NOTE: Do not

over tighten the

screws

left side

panel

top

panel

bottom

panel

Attach 2 legs to bottom of assembled unit with 2

medium screws per leg as shown, using a

screwdriver.

leg

NOTE: Make sure cams

of the back and left side panel

are oriented towards the top

as shown

cadet CABINET

Made in Thailand - r04 Page 4 of 5

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

A. Fit 2 hinges into corresponding holes of 2

doors as shown. Secure each hinge with 2 hinge

screws, using a screwdriver.

C. Adhere 2 bumpers to each door as shown.

B. Attach 1 pull to each door with 2 pull bolts,

using a screwdriver.

A) Attach hinges of each door onto the left or right

side panel of assembled unit. Secure each hinge

with 2 hinge screws.

B) Secure the set screws with a screwdriver as

shown. Refer to Hinge Adjustment diagram for

adjusting the alignment of the door hinges.

Assembly is now complete.

A. With assistance of another adult, position unit

upright. Insert 8 shelf pins at desired shelf

heights.

B. Place 2 adjustable shelves into assembled

unit. Make sure shelves are securely supported by

each shelf pin. 10

adjustable

shelf hinge

door

hinge adjustment

If the doors do not appear square or aligned, loosen or

tighten the appropriate screws on each case hinge as

illustrated.

2) Depth adjustment:

Loosen screw A, push hinge arm

forwards or backwards, re-tighten

screw Aand secure screw Bwith

a 1/4 turn clockwise.

3) Height adjustment:

Loosen screw C, adjust

door height and re-

tighten screw C.

1) Side to side adjustment:

Loosen screw A, adjust gap

with screw Band re-tighten

screw A.

bumper

pull

NOTE: Doors can

be assembled to

left or right side

panel of assembled

unit

cadet CABINET

Made in Thailand- r04 Page 5 of 5

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

optional wall mounting assembly

These instructions are for drywall mounting only. For safe installation

it is essential to use hardware appropriate for your wall type. Mount to

wood wall studs whenever possible. If you are unsure of what type of

fasteners to use, consult your local hardware store or a qualified profes-

sional. This product is only a deterrent, it is not a substitute for proper

adult supervision.

A. Attach 2 wall straps to back on unit with 1 small screw per strap as

shown. Secure, but do not over tighten with a phillips head screwdriver.

B. With the assistance of another adult, place the unit in desired location

against the wall. Mark the location of the hole in the wall strap on the

wall. Move the unit out of the workspace.

C. Drill holes slightly smaller in diameter than the plastic anchor. Insert 1

plastic anchor into each hole until they are flush to the wall.

D. Place the unit back into position against the wall. Insert 1 medium

screw through each wall strap and into the plastic anchor.

Wall mounting is now complete.

FRONT OF UNIT

BACK OF UNIT

wall

strap

small

screw

plastic

anchor

medium

screw

WALL

cleaning & care

Clean surfaces with a dry or damp

soft cloth. Do not use abrasive

cleaners.

Inhaltsverzeichnis

Andere CB2 Inneneinrichtung Handbücher

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung