CBC CX Series Bedienungsanleitung
Please carefully read and observe all instructions
and warnings contained in this manual or on the
product. Improper installation may damage the
device and void the warranty.
CX Series
Instruction Manual
B/W, Color and Day/Night Outdoor Cameras
www.cbcamerica.com
CX Series Instruction Manual
CONTENTS
BASIC DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
MAJOR FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
WIRING CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
MOUNTING THE CAMERA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ADJUSTING CAMERA ORIENTATION . . . . . . . . . . . . . . . . . . . . . . 2
LENS ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FCC RULES: PART 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
DIP Switch Setup: Color Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DIP Switch Setup: Black and White Cameras . . . . . . . . . . . . . . . . . 5
CAMERA SPECIFICATIONS
CX-NV310A-2 Color/CXH-NV310A-2 Hi-Res Color . . . . . . . . 6
CAMERA SPECIFICATIONS
CX-EV310A-2 B&W Camera . . . . . . . . . . . . . . . . . . . . . . . . . 7
CAMERA SPECIFICATIONS
DXH-NV39A Hi-Res Color Day/Night . . . . . . . . . . . . . . . . . . . 8
MODEL CX-EV310A-2 B/W Camera Components . . . . . . . . . . . . . 9
CX Series Instruction Manual
Page 1
BASIC DESCRIPTION
CX Series cameras utilize a high-sensitivity CCD camera with auto iris varifocal lens in a
compact weatherproof housing. Four versions are available:
1) Model CX-EV310A-2 (B/W with 2.8-10mm auto iris varifocal lens)
2) Model CX-NV310A-2 (Color with 2.8-10mm auto iris varifocal lens)
3) Model CXH-NV310A-2 (Hi-Res Color with 2.8-10mm auto iris varifocal lens)
4) Model DXH-NV39A (Hi-Res Color Day/Night with 3-9mm A/I varifocal lens)
MAJOR FEATURES
• Compact and stylish design for use in commercial or residential applications
• Anodized aluminum weather-proof housing with removable sunshield
• Auto-iris varifocals compensate for changing light conditions and provide maximum
depth of field
• Wide Operating Temperature Range for use in any climate
• Adjustable swivel mount for ceiling or wall installations
• Phase adjustment for synchronizing multiple cameras in 24VAC systems
• 12VDC/24VAC auto-sensing power input
• Optional Day/Night Model with retractable IR cut filter (DXH112-V39A).
WIRING CONNECTIONS
WARNING: Make wiring connections only after it has been determined that power has
been disconnected. Use either a 12VDC regulated power supply (C12DCR-500
recommended) or a 24VAC power supply (C24AC recommended). For 12VDC power
input, determine the polarity prior to connection to the camera. Failure to do so could
lead to permanent damage to the device and void the warranty.
NOTE: A BNC connector (included) can be crimped to the WHITE and GREEN video
signal wires using the supplied butt connectors.
Page 2
CX Series Instruction Manual
MOUNTING THE CAMERA
The camera base has two mounting holes for #8 screws (#8 screws and anchors are
supplied). To mount the camera, loosen the swivel set screw with the 1/8” Allen
wrench (supplied) and mount the base in the desired location. The mounting base
can be removed completely from the bracket if necessary.
ADJUSTING CAMERA ORIENTATION
Loosen the swivel set screw and rear end cap set screw with supplied Allen keys.
Orient the camera and tighten both set screws. Be sure to tighten the rear end cap
set screw to maintain a water-tight seal.
LENS ADJUSTMENT
1) Completely loosen the two Phillips screws on the rear endcap that hold the
housing cover in place, and remove the cover.
2) Loosen the focus and zoom adjustment locking screws.
3) Connect the camera to power and a monitor to adjust focal length and focus
for best image.
4) Tighten focus and zoom locking screws. Recheck image after tightening.
5) Replace cover carefully in order to prevent damage to the camera components.
6) Make sure cover is tight against back plate and tighten two Phillips screws on
housing with equal force.
RED
BLACK
WHITE
GREEN
+12VDC/24VAC
POWER GROUND/24VAC
VIDEO SIGNAL OUT
VIDEO GROUND
CX Series Instruction Manual
Page 3
NOTES
A) Do not remove desiccant pack! There is a desiccant pack attached to
the housing base under the board camera that is designed to absorb any
moisture trapped inside the housing during adjustment. To avoid excessive
moisture buildup, it is recommended that the camera not be installed in rainy
or excessively damp conditions. It is also advisable to limit the number of times
the housing cover is removed. The desiccant pack can be replaced if
condensation develops inside the housing.
B) If the housing cover is opened frequently or if the gasket dries out, apply a light
coat of good quality silicone-based grease to the gasket to maintain a
watertight seal.
C) Make sure that the end of the cable, including BNC connector and power
connection, are not exposed to the elements. Exposed cable may cause a
power short.
FCC RULES: PART 15
This device can be expected to comply with part 15 of the FCC Rules, provided it is
assembled in exact accordance with the instructions provided with this kit. Operation
is subject to the following conditions: (1) This device may not cause harmful
interference; and (2) this device must accept any interference received including
interference that may cause undesired operation.
DC DC Iris
1 Iris AES Auto Electronic Shutter
ON Shutter speed to be fixed at 1/100 sec.
2Flickerless (FL) OFF Normal position
Back Light ON Set to this position when a strong light is in the background
3Compensation (BLC) OFF Normal position
INT Internal synchronization mode
4 Synchronization Mode LL Line lock mode
Page 4
CX Series Instruction Manual
IRIS FL BLC SYNC
DC ON ON INT
AES OFF OFF L.L.
1234
DIP Switch Setup: Color Cameras
(Factory settings shown. Do not change settings except for BLC function as needed)
CX Series Instruction Manual
Page 5
IRIS AGC BLC SYNC
DC OFF ON INT
AES ON OFF L.L.
123 4
DIP Switch Setup: Black and White Cameras
(Factory settings shown. Do not change settings except for BLC function as needed)
DC DC Iris
1Iris AES Auto Electronic Shutter
Auto Gain Control ON Gain level to be fixed at min.
2(AGC) OFF Set to this position to improve camera sensitivity in low light conditions
Back Light ON Set to this position when a strong light is in the background
3Compensation (BLC) OFF Normal position
INT Internal synchronization mode
4Synchronization Mode LL Line lock mode
Page 6
CX Series Instruction Manual
CAMERA SPECIFICATIONS
CX-NV310A-2 Color/CXH-NV310A-2 Hi-Res Color
Video Signal System NTSC Standard
Image Output 1 Volt p-p/75 Ohms
Scanning System 2:1 Interlace
Resolution 330 lines horz (standard)/480 lines horz (hi-res)
Sensitivity @f1.2 1.0 lux (50 IRE) / 1.5 lux (50 IRE)
0.4 lux (30 IRE) / 0.7 lux (30 IRE)
S/N Ratio More than 50dB
Image Sensor 1/4" Interline Transfer CCD
Effective Picture Elements 510(H) x 492(V) / 768(H) x 492(V)
Scanning Frequency Horz. 15.734KHz/Vert 59.9Hz
Sync System Internal / Line Lock
Gamma 0.45
Gain Control Automatic
Iris DC Auto Iris
Power Source DC 12V ± 1.0 volt or 24VAC
Power Consumption min 200 mA
Operating Temperature Range -30ºF to +140º F
Lens 2.8 ~ 10mm f1.2 Auto Iris
CX Series Instruction Manual
Page 7
CAMERA SPECIFICATIONS
CX-EV310A-2 B&W Camera
Video Signal System EIA Standard
Image Output 1 Volt p-p/75 Ohms
Scanning System 2:1 Interlace
Resolution 380 lines horz
Sensitivity @f1.2 0.1 lux (50 IRE)
0.04 lux (30 IRE)
S/N Ratio 50dB (AGC off)
Image Sensor 1/4" Interline Transfer CCD
Pixel Size 9.60 um(H) x 7.50 um(V)
Effective Picture Elements 510(H) x 492(V)
Scanning Frequency Horz. 15.734KHz/Vert 59.9Hz
Sync System Internal / Line Lock
Gamma 0.45
AGC +12dB
Iris DC Auto Iris
Power Source DC 12V ± 1.0 volt or 24VAC
Power Consumption min 200 mA
Operating Temperature Range -30ºF to +140º F
Lens 2.8 ~ 10mm f1.2 Auto Iris
Page 8
CX Series Instruction Manual
CAMERA SPECIFICATIONS
DXH-NV39A Hi-Res Color Day/Night
Video Signal System NTSC Standard
Image Output 1 Volt p-p/75 Ohms
Scanning System 2:1 Interlace
Resolution 480 lines horz
Sensitivity @f1.4 0.21 lux (50 IRE-Night Mode/B/W)
0.07 lux (30 IRE-Night Mode/B/W)
S/N Ratio More than 50dB
Image Sensor 1/4" Interline Transfer CCD
Effective Picture Elements 768(H) x 494(V)
Scanning Frequency Horz. 15.734KHz/Vert 59.9Hz
Sync System Internal / Line Lock
Gamma 0.45
Gain Control Automatic
Iris DC Auto Iris
Power Source DC 12V ± 1.0 volt or 24VAC
Power Consumption 300 mA recommended
Operating Temperature Range -30ºF to +140º F
Lens 3-9mm f1.4 Auto Iris Day/Night Lens with ED glass
and filter removal mechanism
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere CBC Sicherheitskamera Handbücher
CBC
CBC ZN-D MTP Series Gebrauchsanweisung
CBC
CBC PT127N-XT Bedienungsanleitung
CBC
CBC PT110N Bedienungsanleitung
CBC
CBC LC703 Bedienungsanleitung
CBC
CBC C-IR0409-40 Series Bedienungsanleitung
CBC
CBC ZC-D4000 Series Bedienungsanleitung
CBC
CBC PT112N Bedienungsanleitung
CBC
CBC CMC Series Bedienungsanleitung
CBC
CBC GANZ Z8-VD2V-2 Bedienungsanleitung
CBC
CBC PT127N-XT Bedienungsanleitung
CBC
CBC ZC-D3024PHA Bedienungsanleitung
CBC
CBC ZC-F10C1 Bedienungsanleitung
CBC
CBC ZN-MB2 Series Gebrauchsanweisung
CBC
CBC Megapixel Camera Bedienungsanleitung
CBC
CBC Ganz ZC-NH406P Bedienungsanleitung
CBC
CBC ZN-DT Series Gebrauchsanweisung
CBC
CBC CL-301 Bedienungsanleitung
CBC
CBC ZC-F11C4 Bedienungsanleitung
CBC
CBC ZC-PT212 Bedienungsanleitung
CBC
CBC ZN-B2MTP Gebrauchsanweisung
