Central Pneumatic 60801 Montageanleitung
!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5
65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 20i
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2020 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly an d se rv ic e may n ot b e in cl uded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 60801
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
G,+7*%&2%O&8$*8$#
Safety ......................................................... 2
Specifications ............................................. 6
Setup .......................................................... 9
Operation ................................................... 12
Maintenance .............................................. 14
Parts List and Diagram .............................. 15
Warranty .................................................... 16
QFKMLMR%EHNSITE%FMU%U6;LMLGLIME
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
LNJIKGFMG%EF;6GH%LMEGKPOGLIME
LMEGKPOGLIME%J6KGFLMLMR%GI%F%KLEV%I;%;LK6=%
6T6OGKLO%EWIOV=%IK%LMXPKH%GI%J6KEIME
QFKMLMR – When using tools, basic precautions should always be followed, including the following:
R*8*(,7
G&%(*9'4*%$.*%("#Y#%&2%*7*4$("4%#.&4Y=%2"(*=%,89%"8Z'([%$&%/*(#&8#=%
(*,9%,77%$.*%"8#$('4$"&8#%+*2&(*%'#"83%$.*%$&&71
Q&(Y%F(*,
1. V**/%$.*%)&(Y%,(*,%47*,8%,89%)*77%7"3.$*91%%
Cluttered benches and dark areas increase the
risks of electric shock, fire, and injury to persons.
2. U&%8&$%&/*(,$*%$.*%$&&7%"8%*\/7&#"]*%
,$5&#/.*(*#=%#'4.%,#%"8%$.*%/(*#*84*%
&2%27,55,+7*%7"<'"9#=%3,#*#=%&(%9'#$1
The tool is able to create sparks resulting
in the ignition of the dust or fumes.
3. Keep bystanders, children, and visitors away
while operating the tool. Distractions are
able to result in the loss of control of the tool.
Page 3;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 60801
EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ
J*(#&8,7%E,2*$[
1. Stay alert. Watch what you are doing and
use common sense when operating the tool.
Do not use the tool while tired or under the
influence of drugs, alcohol, or medication.%%
A moment of inattention while operating the
tool increases the risk of injury to persons.
2. U(*##%/(&/*(7[1%%U&%8&$%)*,(%7&&#*%
47&$."83%&(%Z*)*7([1%%O&8$,"8%7&83%.,"(1%%
V**/%.,"(=%47&$."83=%,89%37&]*#%,),[%2(&5%
5&]"83%/,($#1%%Loose clothes, jewelry, or long
hair increases the risk of injury to persons as
a result of being caught in moving parts.
3. F]&"9%'8"8$*8$"&8,7%#$,($"831%%S*%#'(*%$.*%],7]*%
"#%&22%+*2&(*%4&88*4$"83%$&%$.*%,"(%#'//7[1%%
Do not carry the tool with your finger on the switch or
connect the tool to the air supply with the switch on.
4. U&%8&$%&]*((*,4.1%%%
V**/%/(&/*(%2&&$"83%,89%+,7,84*%,$%,77%$"5*#1%%
Proper footing and balance enables better
control of the tool in unexpected situations.
5. P#*%#,2*$[%*<'"/5*8$1
A dust mask, non-skid safety shoes
and a hard hat must be used for the
applicable conditions.
6. F7),[#%)*,(%*[*%/(&$*4$"&81
Wear ANSI-
approved safety goggles.
7. F7),[#%)*,(%.*,("83%/(&$*4$"&8%
).*8%'#"83%$.*%$&&71
Prolonged exposure to high
intensity noise is able to cause
hearing loss.
8. Q*,(%.*,][?9'$[%)&(Y%37&]*#%9'("83%'#*1
G&&7%P#*%,89%O,(*
1. Use clamps or another practical way to secure
and support the work piece to a stable platform.
Holding the work by hand or against the body is
unstable and is able to lead to loss of control.
2. U&%8&$%2&(4*%$.*%$&&71 Use the correct tool for the
application. The correct tool will do the job better
and safer at the rate for which the tool is designed.
3. U&%8&$%'#*%$.*%$&&7%"2%$.*%#)"$4.%9&*#%8&$%$'(8%$.*%
$&&7%&8%&(%&221 Any tool that cannot be controlled
with the valve is dangerous and must be repaired.
4. U"#4&88*4$%$.*%$&&7%2(&5%$.*%,"(%#&'(4*%+*2&(*%
5,Y"83%,8[%,9Z'#$5*8$#=%4.,83"83%,44*##&("*#=%
&(%#$&("83%$.*%$&&71 Such preventive safety
measures reduce the risk of starting the tool
unintentionally. Turn off and detach the air supply,
safely discharge any residual air pressure, and
release the throttle and/or turn the valve to its
off position before leaving the work area.
5. Store the tool when it is idle out of reach
of children and other untrained persons.
A tool is dangerous in the hands of untrained users.
6. N,"8$,"8%$.*%$&&7%)"$.%4,(*1%%%
A properly maintained tool is easier to control.
7. O.*4Y%2&(%5"#,7"385*8$%&(%+"89"83%&2%5&]"83%
/,($#=%+(*,Y,3*%&2%/,($#=%,89%,8[%&$.*(%4&89"$"&8%
$.,$%,22*4$#%$.*%$&&7^#%&/*(,$"&81%%If damaged,
have the tool serviced before using. Many accidents
are caused by poorly maintained tools.
There is a risk of bursting if the tool is damaged.
8. P#*%&87[%,44*##&("*#%$.,$%,(*%"9*8$"2"*9%+[%$.*%
5,8'2,4$'(*(%2&(%$.*%#/*4"2"4%$&&7%5&9*71 Use of
an accessory not intended for use with the specific
tool model, increases the risk of injury to persons.
E*(]"4*
1. Tool service must be performed only
by qualified repair personnel.
2. Q.*8%#*(]"4"83%,%$&&7=%'#*%&87[%"9*8$"4,7%
(*/7,4*5*8$%/,($#1%%P#*%&87[%,'$.&("_*9%/,($#1
3. U&%8&$%'#*%,8[%7'+("4,8$#%)"$.%$."#%$&&71
Page 4 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 60801
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
F"(%E&'(4*
1. M*]*(%4&88*4$%$&%,8%,"(%#&'(4*%$.,$%
"#%4,/,+7*%&2%*\4**9"83%`aa%/#"1
Over pressurizing the tool may
cause bursting, abnormal
operation, breakage of the tool or serious injury to
persons. Use only clean, dry, regulated
compressed air at the rated pressure or within the
rated pressure range as marked on the tool.
Always verify prior to using the tool that the air
source has been adjusted to the rated air pressure
or within the rated air-pressure range.
2. Never use oxygen, carbon dioxide, combustible
gases or any bottled gas as an air source
for the tool. Such gases are capable of
explosion and serious injury to persons.
%EF!6%GW6E6%LMEGKPOGLIME1
EHNSITE%FMU%EJ6OL;LO%EF;6GH%LMEGKPOGLIME
E[5+&7%U*2"8"$"&8#
E[5+&7 J(&/*($[%&(%#$,$*5*8$
JEL Pounds per square inch of pressure
O;N Cubic Feet per Minute flow
EO;N Cubic Feet per Minute flow
at standard conditions
MJG National pipe thread, tapered
MJE National pipe thread, straight
E[5+&7 J(&/*($[%&(%#$,$*5*8$
WARNING marking
concerning Risk of Eye Injury.
Wear ANSI-approved eye protection.
WARNING marking concerning Risk of
Hearing Loss. Wear hearing protection.
WARNING marking concerning
Risk of Respiratory Injury. Wear
NIOSH-approved dust mask/respirator.
WARNING marking concerning
Risk of Explosion.
E/*4"2"4%E,2*$[%L8#$('4$"&8#
1. The warnings and precautions discussed in this
manual cannot cover all possible conditions and
situations that may occur. It must be understood
by the operator that common sense and caution
are factors which cannot be built into this
product, but must be supplied by the operator.
2. UI%MIG%UKIJ%GFMV=%KLEV%I;%6bJTIELIM1
3. Attach all accessories properly to the Soda Blaster
before connecting the air supply. A loose
accessory may detach or break during operation.
4. Obey the manual for the air compressor
used to power this Soda Blaster.
5. Install an in-line shutoff valve to allow
immediate control over the air supply in an
emergency, even if a hose is ruptured.
Page 5;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 60801
EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ
E"7"4&#"#%E,2*$[%N*,#'(*#
UI%MIG%PE6%EFMUc
F+(,#"]*%+7,#$"83%)"$.%#,89%d)."4.%4&8$,"8#%4([#$,77"8*%#"7"4,e%4,8%4,'#*%
#"7"4&#"#%d,%#*("&'#%7'83%9"#*,#*e=%4,84*(%,89%9*,$.1%%G&%(*9'4*%4([#$,77"8*%#"7"4,%
*\/&#'(*#%"8%$.*%)&(Y/7,4*%,89%/(*]*8$%#"7"4&#"#%,89%#"7"4&#"#?(*7,$*9%9*,$.#-
1. Prohibit silica sand (or other substances
containing more than 1% crystalline silica)
as an abrasive blasting material and
substitute less hazardous materials.
2. Conduct air monitoring to measure worker exposures.
3. Use containment methods such as blast-cleaning
machines and cabinets to control the hazard
and protect adjacent workers from exposure.
4. Practice good personal hygiene to avoid
unnecessary exposure to silica dust.
5. Wear washable or disposable protective
clothes at the work site. Shower and change
into clean clothes before leaving the work site
to prevent contamination of cars, homes and
other work areas. Avoid skin exposure.
6. Always wear a NIOSH approved respirator and
safety goggles. Ventilate the work area properly.
7. Provide periodic medical examinations for all
workers who may be exposed to crystalline silica.
8. Post signs to warn workers about the hazard and to
inform them about required protective equipment.
9. Provide workers with training that includes
information about health effects, work practices
and protective equipment for crystalline silica.
10. Report all cases of silicosis to State health
departments and to OSHA or the Mine Safety
and Health Administration (MSHA).
!"+(,$"&8%J(*4,'$"&8#
This tool vibrates during use. Repeated or long-term
exposure to vibration may cause temporary or permanent
physical injury, particularly to the hands, arms and
shoulders. To reduce the risk of vibration-related injury:
1. Anyone using vibrating tools regularly or for an
extended period should first be examined by a
doctor and then have regular medical check-ups to
ensure medical problems are not being caused or
worsened from use. Pregnant women or people who
have impaired blood circulation to the hand, past
hand injuries, nervous system disorders, diabetes,
or Raynaud's Disease should not use this tool.
If you feel any symptoms related to vibration (such
as tingling, numbness, and white or blue fingers),
seek medical advice as soon as possible.
2. Do not smoke during use. Nicotine reduces
the blood supply to the hands and fingers,
increasing the risk of vibration-related injury.
3. Wear suitable gloves to reduce the
vibration effects on the user.
4. Use tools with the lowest vibration
when there is a choice.
5. Include vibration-free periods each day of work.
6. Grip tool as lightly as possible (while still keeping
safe control of it). Let the tool do the work.
7. To reduce vibration, maintain
tool as explained in this manual.
If abnormal vibration occurs, stop immediately.
%EF!6%GW6E6%LMEGKPOGLIME1
Page 6 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 60801
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
;'84$"&8,7%U*#4("/$"&8
E/*4"2"4,$"&8#
Maximum Air Pressure 90 PSI
Air Inlet 1/4″ -18 NPT
Average Air Consumption 8.5 CFM @ 90 PSI
Abrasive Capacity 40 lb.
Abrasive Type Sodium Bicarbonate
media &87[
Page 7;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 60801
EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ
O&5/&8*8$#%,89%O&8$(&7#
G,8Y
F"(%!,7]*
F"(%
K*3'7,$&(
V8&+
N*9",%
K*3'7,$&(
V8&+
N*9",%
!,7]*
E,2*$[%
!,7]*
d&8%+,4Ye
J(*##'(*%
R,'3*
M&__7*
F+(,#"]*%
W&#*
F+(,#"]*%
I'$7*$%J"/*%
d8&$%#.&)8e
Page 8 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 60801
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
LMLGLFT%EIUF%STFEG6K%E6G%PJ0FEE6NSTH
%K*,9%$.*%6MGLK6%LNJIKGFMG%EF;6GH%LM;IKNFGLIM%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%
5,8',7%"847'9"83%,77%$*\$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
M&$*- For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
F##*5+7[
1. Attach Air Regulator (5) to the Tank (1) with
Attach Bracket (9) using the two Socket
Head Screws (8) and wrench tighten.
2. Remove the Compression Nut (22)
from the Air Regulator.
3. Insert the knob on the top of the
Air Regulator through the Bracket.
4. Align the tab on the Bracket with the recess
at gauge side of the Regulator, attach
Compression Nut and finger tighten until snug.
5. Attach Abrasive Outlet Pipe (11) and Abrasive
Hose (24) to Media Regulator (15).
6. Attach Air Hose (10) to Air Regulator
and Media Regulator.
S(,4Y*$%dDe
E&4Y*$%W*,9%
E4(*)#%d@e
J(*##'(*%
R,'3*%dAe
F"(%
K*3'7,$&(%dBe
O&5/(*##"&8%
M'$%d``e
G,8Y%d>e
;"3'(*%F-%%F"(%K*3'7,$&(%F##*5+7[
Page 9;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 60801
EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ
F"(%E'//7[
GI%JK6!6MG%E6KLIPE%LMXPKH%;KIN%6bJTIELIM-%
P#*%&87[%47*,8=%9([=%(*3'7,$*9=%4&5/(*##*9%,"(%$&%/&)*(%$."#%E&9,%S7,#$*(1%%%
U&%8&$%'#*%&\[3*8=%4,(+&8%9"&\"9*=%4&5+'#$"+7*%3,#*#=%%
&(%,8[%&$.*(%+&$$7*9%3,#%,#%,%/&)*(%#&'(4*%2&(%$."#%E&9,%S7,#$*(1
1. Incorporate a filter, regulator with pressure gauge,
dryer, in-line shutoff valve, and quick coupler for
best service, as shown in Figure B on page 10
and Figure C on page 11. %F8%"8?7"8*%#.'$&22%+,77%
],7]*%"#%,8%"5/&($,8$%#,2*$[%9*]"4*%+*4,'#*%
"$%4&8$(&7#%$.*%,"(%#'//7[%*]*8%"2%$.*%,"(%.&#*%
"#%('/$'(*91%%G.*%#.'$&22%],7]*%#.&'79%+*%,%
+,77%],7]*%+*4,'#*%"$%4,8%+*%47&#*9%<'"4Y7[1
M&$*-%An oiler system should not be used with this
Soda Blaster. The oil will mix with the material
being propelled, causing poor results.
2. Attach an air hose to the compressor's air outlet.
Connect the air hose to the air valve
of the Soda Blaster. Other components, such
as a coupler plug and quick coupler, will make
operation more efficient, but are not required.
QFKMLMRc%%GI%JK6!6MG%E6KLIPE%LMXPKH%
;KIN%FOOLU6MGFT%IJ6KFGLIM-%
U&%8&$%"8#$,77%,%2*5,7*%<'"4Y%4&'/7*(%&8%$.*%$&&71
Such a coupler contains an air valve that will
allow the air tool to retain pressure and operate
accidentally after the air supply is disconnected.
M&$*-%Air flow, and therefore Soda Blaster
performance, can be hindered by undersized air
supply components. The air hose must be long
enough to reach the work area with enough extra
length to allow free movement while working.
3. Close the Soda Blaster’s valves.
4. Close the in-line shutoff valve between the
compressor and the Soda Blaster.
5. Turn on the air compressor according to
the manufacturer's directions and allow it
to build up pressure until it cycles off.
6. Adjust the air compressor's output regulator so
that the air output is enough to properly power the
Soda Blaster, but the output will not exceed the
Soda Blaster's maximum air pressure at any time.
Adjust the pressure gradually, while checking the
air output gauge to set the right pressure range.
7. Inspect the air connections for leaks.
Repair any leaks found.
8. If the Soda Blaster will not be used at this
time, turn off and detach the air supply, safely
discharge any residual air pressure, and close
the valves to prevent accidental operation.
M&$*- Residual air pressure should not be present after
the tool is disconnected from the air supply. However,
it is a good safety measure to attempt to discharge
the tool in a safe fashion after disconnecting to ensure
that the tool is disconnected and not powered.
Page 10 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 60801
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
;"3'(*%S-%%J&($,+7*%F"(%E'//7[%E*$'/
G
A
E
E
H
F
B
Non-lubricated
Tools
Lubricated
Tools
A
B
C
C
DA
U*#4("/$"&8 ;'84$"&8
A Air Hose Connects air to tool
B Filter Prevents dirt and condensation from damaging tool or workpiece
C Regulator Adjusts air pressure to tool
D Lubricator (optional) For air tool lubrication
E Coupler and Plug Provides quick connection and release
F Leader Hose (optional) Increases coupler life
G Air Cleaner / Dryer (optional) Prevents water vapor from damaging workpiece
H Air Adjusting Valve (optional) For fine tuning airflow at tool
Inhaltsverzeichnis
Andere Central Pneumatic Elektrowerkzeuge Handbücher
Central Pneumatic
Central Pneumatic CENTRAL PNEUMATIC 68128 Installationshandbuch
Central Pneumatic
Central Pneumatic 96661 Montageanleitung
Central Pneumatic
Central Pneumatic 94802 Bedienungsanleitung
Central Pneumatic
Central Pneumatic 95098 Bedienungsanleitung
Central Pneumatic
Central Pneumatic 92849 Bedienungsanleitung
Central Pneumatic
Central Pneumatic Contractor 90399 Bedienungsanleitung
Central Pneumatic
Central Pneumatic 68029 Installationshandbuch
Central Pneumatic
Central Pneumatic 66886 Installationshandbuch
Central Pneumatic
Central Pneumatic 36567 Bedienungsanleitung
Central Pneumatic
Central Pneumatic 66984 Bedienungsanleitung
Central Pneumatic
Central Pneumatic Contractor 93197 Bedienungsanleitung
Central Pneumatic
Central Pneumatic 54753 Stücklistenhandbuch
Central Pneumatic
Central Pneumatic 95119 Installationshandbuch
Central Pneumatic
Central Pneumatic 93048 Bedienungsanleitung
Central Pneumatic
Central Pneumatic 93216 Bedienungsanleitung
Central Pneumatic
Central Pneumatic 95801 Stücklistenhandbuch
Central Pneumatic
Central Pneumatic 46446 Bedienungsanleitung
Central Pneumatic
Central Pneumatic 99792 Installationshandbuch
Central Pneumatic
Central Pneumatic 68423 Bedienungsanleitung
Central Pneumatic
Central Pneumatic 67996 Bedienungsanleitung
Central Pneumatic
Central Pneumatic 47706 Bedienungsanleitung
Central Pneumatic
Central Pneumatic Earthquake 65159 Installationshandbuch
Central Pneumatic
Central Pneumatic CENTRALPNEUMATIC 98580 Montageanleitung
Central Pneumatic
Central Pneumatic Central Pneumatic 1/4" Stubby Air Ratchet... Bedienungsanleitung
