Chauvet DJ Beamer 8 Bedienungsanleitung

Beamer 8

Quick Reference Guide

Beamer 8 QRG EN

About This Guide

The Beamer 8 Quick Reference Guide (QRG) has basic

product information

such as mounting, menu options, and DMX values. Download the

User

Manual from www.chauvetlighting.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to

change without notice.

Safety Notes

These Safety Notes include important information about

installation, use,

and maintenance.

•This product is not intended for permanent installation.

•ONLY connect this product to a grounded and protected circuit.

•Always disconnect from power before cleaning.

•DO NOT look at the light source when the product is on.

•Make sure the power cord is not crimped or damaged.

•Never disconnect this product from power by pulling on the cord.

•When mounting this product overhead, use a safety cable.

•DO NOT allow flammable materials close to the unit while operating.

•

DO NOT touch this product when it is operating because it may be hot.

•The voltage of the outlet to which you are connecting this product must

be within the range stated on the decal or rear panel of the product.

•This product is for indoor use only! (IP20) To prevent risk of fire or

shock, do not expose this product to rain or moisture.

•Always mount this product in a location with adequate ventilation, at

least 20 in (50 cm) from adjacent surfaces.

•Be sure that no ventilation slots on the unit’s housing are blocked.

•Never connect this product to a dimmer or rheostat.

•ONLY use the hanging/mounting bracket or the handles to carry this

product.

•The maximum ambient temperature is 104 °F (40 °C). Do not operate

this product at higher temperatures.

•In the event of a serious operating problem, stop using immediately.

•DO NOT open this product. It contains no user-serviceable parts.

•To eliminate unnecessary wear and improve the lifespan, during periods

of non-

use completely disconnect the product from power via breaker or

by unplugging it.

Contact

Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact

your distributor to request support or return a product. Visit

www.chauvetlighting.com for contact information.

What Is

Included

•Beamer 8

•Power Cord •Warranty Card

•Quick Reference Guide

Beamer 8 QRG EN

To Begin

Unpack your Beamer 8

and make sure you have received all parts in good

condition. If the box or contents appear damaged, notify the carrier

immediately, not Chauvet.

Product

Description

The Beamer 8 is a combo multi-effect light. Perfect for any occasion, 8

fully adjustable LED beam heads combined with a s

eparate LED strobe

effect light. Bring life to the party with Sound-A

ctive mode and fully

automated programs. It includes an all-on and chase option, with red, green,

blue or rainbow-chase color options.

Front Overview

Rear Overview

IR Sensor

Lenses

Mounting

Bracket

Power Out

Microphone

Power In

Sound

Sensitivity

Safety Loop

Power Indicator LED

Control Panel

Buttons

Strobe

Fuse Holder

DMX In/Out

Sound Mode Indicator

LED

Beamer 8 QRG EN

AC Power

The Beamer 8 products have an auto-ranging power supply that can work with

an input voltage range of 100 to 240 VAC, 50/60 Hz.

To eliminate unnecessary wear and improve its lifespan, during periods of

non-use

completely disconnect the product via breaker or by unplugging

it.

Power Linking

For the maximum number of Beamer 8 products that you can power link at

each voltage, see the User Manual or the sticker on the product.

Fuse

Replacement

1. Disconnect the product from power.

2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.

3. Pry the safety cap out of the housing.

4. Remove the blown fuse from the clip on the front of the safety cap and

replace with a fuse of the exact same type and rating.

5. Re-insert the fuse holder and reconnect power.

DMX Linking

The Beamer 8 works with a DMX controller. Information about configuring

Beamer 8 for DMX operation is in the User Manual, which is available from

the Chauvet website: http://www.chauvetlighting.com. Information about DMX

is in the CHAUVET DMX Primer, which is available from the Chauvet

website: https://www.chauvetdj.com/downloads/.

Starting

Address

To ensure full access to all channels in each DMX mode, the highest

recommended DMX address for this product is 497.

Master/Slave

Connection

The Beamer 8 works in Master/Slave mode. Information about configuring this

product for Master/Slave operation is in its User Manual, which is available

from the Chauvet website: http://www.chauvetlighting.com.

Control Panel

Description

Button Function

<MENU>

Selects an operation mode or exits current menu option

<UP>

Scrolls up through the menu list or increases the numeric value

when in a function

<DOWN>

Scrolls down through the menu list or decreases the numeric

value when in a function

<ENTER>

Activates a menu option or selected value

Beamer 8 QRG EN

Menu Map

Main Function Programming Levels Description

DMX

02Ch

d001–d511

Selects DMX personality and DMX

starting value

16Ch

d001–d497

Static Color C--

C 1

Red

C 2

Green

C 3

Blue

Auto Program P-- P 1–P 9 Selects auto program and

Speed S-- S. 1 – S. 99 speed (slow to fast)

Sound Mode

SND

SND1-9

Selects sound-active program

IR Function SET

Turn IR On/Off

OFF

Auto and Sound Modes Defined

Program

Effect

All – Beams and Strobes

Beams Only

Strobes Only

Beamer 8 QRG EN

Mounting

Before mounting this product, read the Safety Notes. The Beamer 8

products

can be surface mounted, but if you choose to mount overhead

using the

mounting hole;

do this with a screw, nut and bolt, or a hanging clamp. When

rigging, consider IR function.

Mounting

Diagram

•When aiming the products, you may use the bracket adjustment

knob(s) on the bracket

. Loosen the knob(s), adjust to the desired

angle, and then

tighten the knob(s) by turning clockwise. Do not use

tools for this step, as it may cause damage.

•Each LED beam head

is mounted on a multidirectional pivot, and

can be manually adjusted to most positions.

Mounting

Bracket

Mounting

Clamp

Safety Cable

Beamer 8 QRG EN

IRC-6 Remote (Infrared Remote Control)

The Beamer 8 is compatible with the IRC-6 remote from Chauvet.

In DMX mode the IR will

not function.

The following IRC-6 buttons are used with the Beamer 8:

Turns LED on/off

Cycles through Sound-Active programs with each press

Adjust speed setting for Auto programs

Cycles through Auto programs

Speed of Auto Program up or down

All beams Static Red

All beams Static Green

All beams Static Blue

No Function

Beams Only

Beams and Strobes

Beams Only

Beams and Strobe

Strobes Only

Beams and Strobe

Strobes Only

Beams Only

Strobes Only

All other buttons have No Function with this product.

Zones of DMX Control for Beamer 8

DMX

Controllable

Heads

Strobes

Beamer 8 QRG EN

DMX Values

16CH

Channel

Function

Value

Percent/Setting

1–8 Static Color

000

Blackout

Beam

Heads 1–8

001 ó085

Red 0–100%

086 ó170

Green 0–100%

171 ó255

Blue 0–100%

Beam Dimmer

000 ó255

100–0%

10 Pulse Effect Speed

000 ó080

Speed 0–100%

081 ó160

Speed 100–0%

161 ó240

Strobe speed 0–100%

241 ó255

Strobe sound mode

Strobe 1

000 ó255

0–100%

Strobe 2

000 ó255

0–100%

Strobe 3

000 ó255

0–100%

Strobe 4

000 ó255

0–100%

15 Auto Programs

000 ó005

Blackout

006 ó089

Beams only

090 ó173

Strobe Only

174 ó255

Beams and Strobe

16 All Program Speed

000 ó250

Auto program Speed 0–100%

251 ó255

Sound Mode

2-CH

Channel

Function

Value

Percent/Setting

1 Auto Programs

000 ó005

Blackout

006 ó089

Beams only

090 ó173

Strobe Only

174 ó255

Beams and Strobe

2 All Program Speed

000 ó250

Auto program Speed 0–100%

251 ó255

Sound Mode

Beamer 8 GRR ES

Acerca de

esta guía

La Guía de referencia rápida (GRR) del Beamer

8 contiene información

básica sobre el producto, como montaje, opciones de menú y valores DMX.

Descargue el manual de usuario de www.chauvetlighting.com

para una

información más detallada.

Exención de

responsabilidad

La información y especificaciones contenidas en esta GRR están sujetas a

cambio sin previo aviso.

Notas de

seguridad

Estas notas de seguridad incluyen información importante sobre el montaje,

uso y mantenimiento.

•Este producto no está concebido para una instalación permanente.

•Conecte este producto SOLO a un circuito con toma de tierra y

protegido.

•Desconecte siempre de la alimentación antes de la limpieza o

sustitución del fusible.

•NO mire a la fuente de luz cuando el producto esté encendido.

•Asegúrese de que el cable de alimentación no está retorcido ni

estropeado.

•Nunca desconecte este producto de la alimentación tirando del cable.

•Cuando monte este producto en alto, use un cable de seguridad.

•NO permita la presencia de materiales inflamables cerca de la unidad

cuando esté en funcionamiento.

•NO toque este producto cuando esté en funcionamiento, pues podría

estar caliente.

•La tensión del enchufe al que conecte este producto ha de estar en el

rango establecido en el grabado o en el panel posterior del producto.

•¡Este producto es para uso en interiores solamente! (IP20) Para evitar

riesgos de incendio o descarga, no exponga este producto a la lluvia o la

humedad.

•Monte siempre este producto en una ubicación con ventilación

adecuada, al menos a 20 in (50 cm) de superficies adyacentes.

•Asegúrese de que ninguna ranura de ventilación en la carcasa de la

unidad queda bloqueada.

•Nunca conecte este producto a un atenuador o reostato.

•Sustituya el fusible con uno del mismo tipo y categoría.

•Use SOLAMENTE los soportes de colgar/montar o las asas para mover

este producto.

•La temperatura ambiente máxima es de 104 °F (40 °C). No haga

funcionar este producto a temperaturas más altas.

•En caso de un problema grave de funcionamiento, deje de usarlo

inmediatamente.

•NO abra este producto. No contiene piezas reparables por el usuario.

•Para evitar un desgaste innecesario y alargar su vida útil, desconecte

completamente el producto mediante el interruptor o desenchufándolo

durante periodos en que no se use.

Beamer 8 GRR ES

Contacto

Fuera de EE. UU., Reino Unido, Irlanda, México o Benelux póngase en

contacto con su distribuidor para solicitar asistencia o devolver un producto.

Visite http://www.chauvetlighting.com para información de contacto.

Qué va incluido

•Beamer 8

•Cable de alimentación •Tarjeta de garantía

•Guía de referencia rápida

Para empezar

Desembale su Beamer 8

y asegúrese de que ha recibido todas las partes en

buen estado. Si la caja o los componentes parecen dañados, notifíqueselo

inmediatamente al transportista, no a Chauvet.

Descripción del

producto

El Beamer 8 es una luz combinada multiefecto. Perfecto par

a cualquier

ocasión, se compone de 8 cabezas LED totalmente ajustables combinadas

con una luz LED de efecto estroboscopio independiente. Dele vida a sus

fiestas con el modo activo por sonido y los programas totalmente

automáticos. Incluye una opción de to

do encendido y secuencia, con

opciones de color rojo, verde azul o secuencia arco iris.

Vista frontal

Vista posterior

Sensor IR

Lentes

Soporte de

montaje

Salida de

alimentación

Micrófono

Entrada de

alimentación

Sensibilidad al

sonido

Lazo de seguridad

LED indicador de

alimentación

Botones del

panel de

control

Estroboscopio

Portafusibles

Entrada/Salida

DMX

LED indicador de

modo Sonido

Inhaltsverzeichnis

Sprachen:

Andere Chauvet DJ DJ-Equipment Handbücher

Chauvet DJ

Chauvet DJ 4BAR Flex T USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane 700 Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR T12 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ SHOCKER PANEL 180 Bedienungsanleitung

Chauvet DJ

Chauvet DJ CORE PAR Q60 ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ GigBAR MOVE + ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORband T3BT ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ Techno Strobe 2000S Bedienungsanleitung

Chauvet DJ

Chauvet DJ Intimidator Scan 360 Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR Flex T USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ FREEDOM CHARGE 8 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Mini 4 Bar 2.0 Bedienungsanleitung

Chauvet DJ

Chauvet DJ GigBAR MOVE ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZ Laser RB Bedienungsanleitung

Chauvet DJ

Chauvet DJ EVE P-130 RGB Bedienungsanleitung

Chauvet DJ

Chauvet DJ intimidator SPOT 375Z IRC Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZ Link Par Q6 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimSTRIP UV-18 IRC Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZ Pin Zoom Pack Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ Cumulus Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR LT BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ Intimidator Scan 360 Bedienungsanleitung

Chauvet DJ

Chauvet DJ OBSESSION Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung