Chauvet DJ DMX-4 Bedienungsanleitung

DMX-4

User Manual

CH-1 CH-2 CH-3 CH-4

INPUT VOLTAGE EQUALS OUTPUT VOLTAGE

OUTPUT: 5 A / CH; 15 A MAX

DMX

STANDALONE

DMX SIGNAL

DMX

Mode

Address

Personality

Switch/Dimmer

Switch:

Dimmer:

Standalone

Mode

Program ~

Run Speed ~

Dimmer ~

MENUMODE

DISPLAY DESCRIPTION

1-CHANNEL

2-CHANNEL

4-CHANNEL

CHANNEL 1 FUNCTION

CHANNEL 2 FUNCTION

CHANNEL 3 FUNCTION

CHANNEL 4 FUNCTION

0% ~ 100%

SLOW ~ FAST

On if DMX On

TURN POWER ON/OFF

AS DMX IS DETECTED

DMX-4

DMX-4 User Manual Rev. 3

1. Before You Begin ....................................................................... 1

What Is Included ........................................................................................... 1

Unpacking Instructions.................................................................................. 1

Claims............................................................................................................................ 1

Text Conventions.......................................................................................... 1

Symbols ........................................................................................................ 1

Disclaimer ..................................................................................................... 1

Product at a Glance ...................................................................................... 2

Safety Notes.................................................................................................. 2

2. Introduction ................................................................................ 3

Description.................................................................................................... 3

Features........................................................................................................ 3

Product Overview.......................................................................................... 4

Product Dimensions...................................................................................... 5

3. Setup ........................................................................................... 6

AC Power...................................................................................................... 6

Fuse Replacement......................................................................................................... 6

Dimmer/Switch Operation.............................................................................................. 6

Mounting ....................................................................................................... 7

Orientation...................................................................................................................... 7

Rigging........................................................................................................................... 7

4. Operation .................................................................................... 8

Control Panel Operation................................................................................ 8

Dimmer or Switch Mode................................................................................ 8

Menu Map..................................................................................................... 8

Configuration (DMX) ..................................................................................... 9

DMX Personality and Starting Address.......................................................................... 9

DMX Values.................................................................................................. 9

4-Channel....................................................................................................................... 9

2-Channel....................................................................................................................... 9

1-Channel....................................................................................................................... 9

Configuration (Standalone)........................................................................... 9

Automatic Programs....................................................................................................... 9

5. Maintenance................................................................................ 10

Product Maintenance.................................................................................... 10

6. Technical Specifications ........................................................... 11

7. Returns ........................................................................................ 12

8. Contact Us .................................................................................. 14

Page 1 of 14

DMX-4 User Manual Rev. 3

BEFORE YOU BEGIN

1. BEFORE YOU BEGIN

What Is Included

Unpacking Instructions

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

Claims

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate your claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision, however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetdj.com.

The works of authorship contained in this manual, including, but not limited to, all design, text and images

are owned by Chauvet.

Electronically published by Chauvet in the United States of America.

CHAUVET, the Chauvet logo, and DMX-4 are registered trademarks or trademarks of Chauvet & Sons

LLC. (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and

product names and logos referred to herein may be trademarks of their respective companies.

• DMX-4

• Power Cord • Warranty Card

• Quick Reference Guide

CONVENTION MEANING

1–512 A range of values

50/60 A set of values of which only one can be chosen

Settings A menu option not to be modified

<ENTER> A key to be pressed on the product’s control panel

ON A value to be entered or selected

SYMBOL MEANING

Electrical warning. Not following these instructions may cause electrical damage to

the product, accessories, or the user.

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function

correctly if this information is not used.

Useful information.

Page 2 of 14

BEFORE YOU BEGIN

DMX-4 User Manual Rev. 3

Product at a Glance

Safety Notes

Use on Dimmer Auto Programs 

Outdoor Use Auto-ranging Power Supply 

Sound-Active Replaceable Fuse 

DMX User-Serviceable 

Master/Slave 

• Always connect the product to a grounded circuit to avoid the risk of electrocution.

• Always disconnect the product from the power source before cleaning or replacing the

fuse.

• Make sure the power cord is not crimped or damaged.

• Never disconnect the product from power cord by pulling or tugging on the cord.

• If mounting the product overhead, always secure to a fastening device using a safety

cable.

• Make sure there are no flammable materials close to the product when operating.

• Always make sure that the voltage of the outlet to which you are connecting the product

is within the range stated on the decal or rear panel of the product.

• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose

the product to rain or moisture.

• Always install the product in a location with adequate ventilation, at least 20 in (50 cm)

from adjacent surfaces.

• Be sure that no ventilation slots on the product’s housing are blocked.

• Never connect the product to a dimmer.

• Make sure to replace the fuse with another of the same type and rating.

• Never carry the product from the power cord or any moving part.Always use the hanging/

mounting bracket.

• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at

higher temperatures.

• In the event of a serious operating problem, stop using the product immediately.

• Never try to repair the product. Repairs carried out by unskilled people can lead to

damage or malfunction. Please contact the nearest authorized technical assistance

center.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

• This product is not intended for permanent installation.

Keep this User Manual for future use. If you sell the product to someone else, be sure that

they also receive this document.

Page 3 of 14

DMX-4 User Manual Rev. 3

INTRODUCTION

2. INTRODUCTION

Description

The DMX-4 is a 4-channel dimmer/switch pack optimized for use with LED products. Each channel can be

individually set as a dimmer or a switch. Four duplex outlets can control up to 8 products simultaneously.

Automated programs have adjustable speeds and dimmer levels, which offer great control without DMX.

Features

• 4-channel dimmer/switch pack with up to 5 amps per channel (15 A max)

• Auto on/off when DMX is detected or removed

• Provides DMX control for on/off or dimming to non-DMX fixtures

• Built in circuitry generates a phantom load to prevent ghosting and flickering in LED fixtures

• Custom looks at your fingertips with 16 built-in, configurable chases

• Easy control using standalone mode or DMX control

• Increase flexibility by setting each channel as a dimmer or switch

• Control up to eight units simultaneously with four duplex outlets

• Monitor the status of each channel with separate LED indicators

• Generate a synchronized show using easily accessible automated programs, built-in automated

programs

• Great control without DMX using automated programs with adjustable speeds and dimmer levels

Page 4 of 14

INTRODUCTION

DMX-4 User Manual Rev. 3

Product Overview

CH-1 CH-2 CH-3 CH-4

INPUT VOLTAGE EQUALS OUTPUT VOLTAGE

OUTPUT: 5 A / CH; 15 A MAX

DMX

STANDALONE

DMX SIGNAL

1234

POWER INPUT: 100~240 VAC, 50/60 Hz CAUTIONWARNING

THIS APPARATUS MUST BE EARTHED

N’ OUVREZ PAS. RISQUE DE CHOC ELECTRIQUE

THIS PRODUCT MUST NOT BE CONTINUOUSLY

USED FOR A LONG DURATION UNDER TOTAL 15 A LOAD

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DMX IN DMX OUT

Channel

Outputs

Fuse

Holders

LED

Channel

Indicators

LED

Display

Control

Buttons

Power

Switch

Page 5 of 14

DMX-4 User Manual Rev. 3

INTRODUCTION

Product Dimensions

CH-1 CH-2 CH-3 CH-4

INPUT VOLTAGE EQUALS OUTPUT VOLTAGE

OUTPUT: 5 A / CH; 15 A MAX

DMX

STANDALONE

DMX SIGNAL

DIMMER / SWITCH PACK

1234

POWER INPUT: 100~240 VAC, 50/60 Hz CAUTIONWARNING

THIS APPARATUS MUST BE EARTHED

N’ OUVREZ PAS. RISQUE DE CHOC ELECTRIQUE

THIS PRODUCT MUST NOT BE CONTINUOUSLY

USED FOR A LONG DURATION UNDER TOTAL 15 A LOAD

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DMX IN DMX OUT 2.8 in

70 mm

8.3 in

210 mm

7.7 in

194 mm

Page 6 of 14

SETUP

DMX-4 User Manual Rev. 3

3. SETUP

AC Power

The DMX-4 has an auto-ranging power supply and it can work with an input voltage range of 100 to 240

VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring),

use the current value listed on the label affixed to the product’s back panel, or refer to the product’s

specifications chart. The listed current rating indicates the product’s average current draw under normal

conditions.

Fuse Replacement

The DMX-4 is equipped with replaceable fuses. Each channel has its own 7 A fuse that runs through the

20 A main power supply.

1. Disconnect the product from power.

2. With a #2 Phillips-head screwdriver, unscrew the fuse holder cap from the housing.

3. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.

4. Screw the fuse holder cap back in place and reconnect power.

Dimmer/Switch Operation

Dimmer/switch packs are primarily intended for lamp-based PAR cans. Connecting a fixture equipped with

an electronic (switching) power supply to a dimmer/switch pack may damage the fixture or make it work

erratically. The improved DMX-4’s design now allows you to switch on and off loads equipped with

electronic power supplies, such as LED-based luminaries or laser fixtures. However, the DMX-4 must be in

Switch mode before connecting loads of this type to it. Please see the instructions on how to set the DMX-

4 in Dimmer or Switch Mode

• Always connect the product to a protected circuit (circuit breaker or fuse).

Make sure the product has an appropriate electrical ground to avoid the risk of

electrocution or fire.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-

use completely disconnect the product from power via breaker or by

unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if

the rheostat or dimmer channel serves only as a 0 to 100% switch.

Disconnect the product from the power outlet before replacing the fuse.

Always make sure that the DMX-4 is in Switch mode before connecting a load equipped with

an electronic power supply to it. Doing otherwise could damage the load.

The DMX-4 is optimized to also operate with LED-based products.

Page 7 of 14

DMX-4 User Manual Rev. 3

SETUP

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

Orientation

The DMX-4 may be mounted in any position; however, make sure adequate ventilation is provided around

the product.

Rigging

• Before deciding on a location for the product, always make sure there is easy access to the product

for maintenance and programming purposes.

• Make sure that the structure onto which you are mounting the product can support the product’s

weight. See the Technical Specifications for weight information.

• When mounting the product overhead, always use a safety cable. Mount the product securely to a

rigging point, whether an elevated platform or a truss.

• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.

• When power linking multiple products, mount the products close enough for power linking cables to

reach.

• The bracket adjustment knobs allow for directional adjustment when aiming the product to the

desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the

knobs.

Mounting Diagram

Alternate Rigging

If you are using this product with truss or a lighting stand, there is an alternate rigging configuration

available. This option is ideal for hanging the product without using a mounting clamp.

1. Unplug the product from power.

2. On the back of the product, locate the six Phillips-head screws.

3. Use a Phillips-head screwdriver to remove these screws.

4. The mounting bracket will now come off. Be careful not to damage the internal components of the

dimmer, as they are exposed during this step!

5. Flip the mounting bracket (back panel) around.

6. Reattach the panel by securely reinstalling the six Phillips-head screws.

Truss/Pipe Mounting

CH-1 CH-2 CH-3 CH-4

INPUT VOLTAGE EQUALS OUTPUT VOLTAGE

OUTPUT: 5 A / CH; 15 A MAX

DMX

STANDALONE

DMX SIGNAL

Wall Mounting

Wall Mounting SurfaceWall Mounting Sur

ace

Page 8 of 14

OPERATION

DMX-4 User Manual Rev. 3

4. OPERATION

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display. Please refer to

the Product Overview to see the button locations on the control panel.

Dimmer or Switch Mode

The DMX-4 has two different methods for controlling the output of the four channels. To set this via the control panel,

do the following.

1. Unplug any units from the four output channels.

2. Connect the DMX-4 to a suitable power outlet.

3. Turn the product on.

4. Press <MODE> repeatedly until A001–A512 appears on the display.

5. Press <MENU> repeatedly until S1__, S2__, S3__, or S4__ appears on the display. This setting

can be set differently for each of the four channels. Navigate to the desired channel.

6. Use <UP> or <DOWN> to select either __oN (Switch mode) or __oF (Dimmer mode) for the

channel selected in the previous step.

7. Repeat steps 5 and 6 to set each of the other channels, if necessary.

Menu Map

Button Function

<MODE> Press to find an operation mode or to back out of the current menu option

<UP> Press to scroll up the list of options or to find a higher value

<DOWN> Press to scroll down the list of options or to find a lower value

<MENU> Press to activate a menu option or a selected value

Mode Menu Display Description

DMX Mode

Starting

Address A001–A512 Selects the DMX starting address

Personality CH:01 1-Channel mode

CH:022-Channel mode

CH:044-Channel mode

Switch/Dimmer

Switch: oN

Dimmer: oF

S1__ Channel 1 function

S2__ Channel 2 function

S3__ Channel 3 function

S4__ Channel 4 function

Power Toggle SO00–SO30 Turns power on/off as a DMX signal is detected.

Can assign up to a 30 second delay.

Standalone

Mode

Program P:01–P:16 Automatic programs

Run Speed SP:01–SP:99 Automatic program speeds Slow to fast

Dimmer d000–d100 0–100%

Andere Handbücher für DMX-4

Inhaltsverzeichnis

Andere Chauvet DJ DJ-Equipment Handbücher

Chauvet DJ

Chauvet DJ 6SPOT Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORband HEX 9 IRC Bedienungsanleitung

Chauvet DJ

Chauvet DJ EVE E-100Z Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR Q12 ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZLink Strip Q6 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZ Laser RB Bedienungsanleitung

Chauvet DJ

Chauvet DJ EPIX DRIVE 900 Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR Q12BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR Flex T USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ Festoon EXT Bedienungsanleitung

Chauvet DJ

Chauvet DJ Intimidator Spot 160 ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ BOB LED Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane 1000 Bedienungsanleitung

Chauvet DJ

Chauvet DJ EVE TF-20X Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane 1302 Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORband PiX ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ Intimidator Scan 360 Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZLink Strip Q6 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ FREEDOM CHARGE 8 Bedienungsanleitung

Chauvet DJ

Chauvet DJ GigBAR Flex Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom Wedge Quad Bedienungsanleitung

Chauvet DJ

Chauvet DJ Intimidator Spot 255 IRC Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR PRO W USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom H1 Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung