Chauvet DJ 4BAR Flex T USB Bedienungsanleitung

Quick Reference Guide

QUICK REFERENCE GUIDE

4BAR Flex Q QRG Rev. 1

About This Guide

The 4BAR Flex Q Quick Reference Guide (QRG) has basic product information such as mounting, menu options, and

DMX values. Download the User Manual from www.chauvetdj.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.

For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.

For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and

Germany: www.chauvetlighting.eu/warranty-registration.

Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the

period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This

warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this

warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows

the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This

warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to

country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,

Luxembourg, France, Germany, and Mexico. For warranty terms in other countries, please consult your local distributor.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance.

Contact

Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or

return a product. From inside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, refer to Contact Us at the

end of this QRG for contact information.

What is Included

To Begin

Unpack your 4BAR Flex Q and make sure you have received all parts in good condition. If the box or contents appear

damaged, notify the carrier immediately, not Chauvet.

• This product is not intended for permanent installation.

• ONLY connect this product to a grounded and protected circuit.

• DISCONNECT from power before cleaning or replacing the fuse.

• DO NOT look at the light source when the product is on.

• Make sure the power cord is not crimped or damaged.

• Never disconnect this product from power by pulling on the cord.

• When mounting this product overhead, ALWAYS use a safety cable.

• DO NOT allow flammable materials close to the product when it is operating.

• DO NOT touch the product’s housing when it is on because it will be hot.

• The voltage of the outlet to which you are connecting this product must be within the range stated

on the decal or rear panel of the product.

• This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this

product to rain or moisture.

• In the event of a serious operating problem, stop using immediately.

• Always mount this product in a location with adequate ventilation, at least 20 in (50 cm) from

adjacent surfaces.

• Be sure that no ventilation slots on the unit’s housing are blocked.

• Never connect this product to a dimmer or rheostat.

• Replace the fuse with the same type and rating.

• Never carry the product by the power cord. Use only the handle to carry this product.

• The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher

temperatures.

• DO NOT open this product. It contains no user-serviceable parts.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

• 4BAR Flex Q

• Power cord

• Wireless footswitch

• Hanging brackets

• Carry bag

• Quick Reference Guide

4BAR Flex Q USB QRG Rev. 1

QUICK REFERENCE GUIDE

AC Power

This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.

Fuse Replacement

1. Disconnect the product from power.

2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.

3. Pry the safety cap out of the housing.

4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same

type and rating.

5. Re-insert the fuse holder and reconnect power.

Mounting

Before mounting this product, read the Safety Notes. This product can be mounted to most tripods, trussing (using

appropriate clamps and with/without the included mounting brackets) or can be used floor/surface mounted.

Mounting Diagram

To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the

product from power via breaker or by unplugging it.

Mounting clamp (x2)

(such as CLP-15 from Chauvet)

Safety loop

Tripod insertion point w/

adjustment knob for

tightening

(tripod sold separately)

Mounting

brackets

(x2)

Bracket

adjustment

knobs (x2)

Pod tilt adjustment

knob (x2 per pod)

QUICK REFERENCE GUIDE

4BAR Flex Q QRG Rev. 1

Control Panel Description

Menu Map

DMX Linking

The 4BAR Flex Q can work with a DMX controller. Instructions for connecting and configuring this product for DMX

operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from

www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.

Starting Address

To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 494.

Master/Slave Connection

The 4BAR Flex Q uses the DMX data connection for its Master/Slave mode. Information about configuring the

4BAR Flex Q for Master/Slave operation is in the User Manual, which is available from the Chauvet website.

IRC-6 (Infrared Remote Control)

The 4BAR Flex Q can be operated with the CHAUVET DJ IRC-6. For more information about the IRC-6, download

instructions for the IRC-6 or the 4BAR Flex Q User Manual from

www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.

D-FI USB Connectivity

The 4BAR Flex Q is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from CHAUVET DJ.

Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the product's DMX

Personality and DMX Address. Further instructions for connecting and configuring this product for D-Fi USB operation

are in the 4BAR Flex Q User Manual or D-Fi USB Instruction Sheet.

Button Function

<MENU> Exits from the current menu or function

<UP> Navigates upwards through the menu list and increases the numeric value when in a function

<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function

<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected

function

Mode Programming Levels Description

DMX Mode

4Ch d.1–509 4-channel DMX mode

6Ch d.1–507 6-channel DMX mode

19Ch d.1–494 19-channel DMX mode

Static Colors C-- C 1–15 Static colors

Automatic

Programs P-- P 1–8 Automatic programs

Auto Speed S-- S 1–100 Program speed for P1–8

Dimmer d-- L. 1–255 Dimmer mode

Sound-Active Mode Snd Snd1–8 Sound-active programs

Sound Sensitivity Sens u 0–100 Sound sensitivity

Custom Color

Mixing u--

r0–255

Custom static colors

Combine red, green, blue, and amber

g0–255

b0–255

A0–255

Infrared/DMX Mode SEt

ir on Turns infrared on or off

oFF

out SLAV Enable Master/Slave with other BT products

dMX Enable Master/Slave with non-BT products

WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause

damage to the product.

4BAR Flex Q USB QRG Rev. 1

QUICK REFERENCE GUIDE

Wireless Footswitch Operation

The included wireless footswitch provides quick access to preset colors, color-change programs, and sound-activation

through the 4BAR Flex Q microphone.

To use the footswitch:

1. Connect the 4BAR Flex Q to power. Turn the wireless footswitch on.

2. Press <MENU> repeatedly until SEt shows on the display, and press <ENTER>.

3. Use <UP> or <DOWN> to select ir, and press <ENTER>.

4. Use <UP> or <DOWN> to select on, and press <ENTER>.

5. Press <MENU> repeatedly until P-- shows on the display, and press <ENTER>.

6. Press pedal #3 to activate static color controls. When working, all the lights will begin in a static color and Foot

will appear on the menu display.

7. Use the chart below to activate the desired function.

Pedal Action Function

(Auto program) Tap pedal to activate, then tap to

navigate to desired function Auto programs 1–8

(Sound mode) Press and hold Sound-active programs

(Static colors)

Tap

Red, green, blue, and amber

Red

Green

Blue

Amber

Red and green

Red and blue

Red and amber

Green and blue

Green and amber

Blue and amber

Red, green, and blue

Red, green, and amber

Green, blue, and amber

Auto snap program

Press and hold Auto fade program

(Blackout)

Tap Blackout

Press and hold Fade to blackout

The 4BAR Flex Q footswitch will work properly in any mode, with a maximum unobstructed

distance of 100 ft (30.5 m). You must turn on the ir setting from the 4BAR Flex Q and navigate to

Auto mode before using the footswitch.

Power

switch

LED

indicators

9-volt battery

cover

QUICK REFERENCE GUIDE

4BAR Flex Q QRG Rev. 1

Foodswitch Battery

The wireless footswitch uses a 9-volt battery located under the battery cover on the bottom of the product, which can be

replaced when necessary.

Battery replacement

To replace the battery in the wireless footswitch:

1. Turn the power switch to the Off position.

2. Remove the battery cover by removing 2 screws with a Phillips-head screwdriver.

3. Remove the old battery from the housing and unplug it from the leads.

4. Replace with a new 9-volt battery, ensuring that the positive (+) and negative (-) leads correspond to the correct

electrodes on the battery.

5. Place the battery into the housing and cover with the battery cover.

6. Secure the battery cover with the 2 Phillips-head screws.

DO NOT over-tighten the screws!

4BAR Flex Q USB QRG Rev. 1

QUICK REFERENCE GUIDE

DMX Values

4BAR Flex Q Zones for DMX Control (19Ch)

19Ch

Channel Function Value Percent/Setting

1 Auto Programs

000  009 No function

010  029 Auto program 1

030  049 Auto program 2

050  069 Auto program 3

070  089 Auto program 4

090  109 Auto program 5

110  129 Auto program 6

130  149 Auto program 7

150  169 Auto program 8

170  189 Auto program 9

190  209 Auto program 10

210  229 Auto program 11

230  249 Auto program 12

250  255 Sound mode

2 Dimmer 000  255 0–100%

Strobe

(when Ch.1 is 000  009)

000  009 No function

010  255 Strobe, slow to fast

Auto Speed

(when Ch.1 is 010  249) 000  255 Auto program speed, slow to fast

Sound Sensitivity

(when Ch.1 is 250  255)

000  010 Sound sensitivity (off)

011  255 Sound-active sensitivity (low to high)

4Red 1 000  255 0–100%

5 Green 1 000  255 0–100%

6Blue 1 000  255 0–100%

7Amber 1 000  255 0–100%

8Red 2 000  255 0–100%

9 Green 2 000  255 0–100%

10 Blue 2 000  255 0–100%

11 Amber 2 000  255 0–100%

12 Red 3 000  255 0–100%

13 Green 3 000  255 0–100%

14 Blue 3 000  255 0–100%

15 Amber 3 000  255 0–100%

16 Red 4 000  255 0–100%

17 Green 4 000  255 0–100%

18 Blue 4 000  255 0–100%

19 Amber 4 000  255 0–100%

QUICK REFERENCE GUIDE

4BAR Flex Q QRG Rev. 1

6Ch

4Ch

Channel Function Value Percent/Setting

1 Red all 000  255 0–100%

2Green all 000  255 0–100%

3 Blue all 000  255 0–100%

4 Amber all 000  255 0–100%

5 Dimmer 000  255 0–100%

6 Strobe 000  015 No function

016  255 Strobe, slow to fast

Channel Function Value Percent/Setting

1 Red all 000  255 0–100%

2Green all 000  255 0–100%

3 Blue all 000  255 0–100%

4 Amber all 000  255 0–100%

4BAR Flex Q USB GRR Rev. 1

GUÍA DE REFERENCIA RÁPIDA

Acerca de esta guía

La Guía de referencia rápida (GRR) del 4BAR Flex Q contiene información básica sobre el producto, como montaje, opciones

de menú y valores DMX. Descargue el manual de usuario de www.chauvetdj.com para una información más detallada.

Exención de responsabilidad

La información y especificaciones contenidas en esta GRR están sujetas a cambio sin previo aviso.

GARANTÍA LIMITADA

PARA VER EL REGISTRO DE GARANTÍA Y LOS TÉRMINOS Y CONDICIONES COMPLETOS, VISITE NUESTRO SITIO WEB.

Para clientes en los Estados Unidos y México: www.chauvetlighting.com/warranty-registration.

Para clientes en Reino Unido, República de Irlanda, Bélgica, Países Bajos, Luxemburgo, Francia y Alemania:

www.chauvetlighting.eu/warranty-registration.

Chauvet garantiza que este producto estará libre de defectos de material y mano de obra en condiciones de uso normales,

durante el periodo especificado, sujeto siempre a las exclusiones y limitaciones establecidas en la garantía limitada

completa de nuestro sitio web. Esta garantía se concede únicamente al comprador original del producto y no es transferible.

Para ejercer los derechos que otorga esta garantía, usted debe proporcionar una prueba de compra en forma de un recibo

de compra original, expedido por un distribuidor autorizado, donde figure el nombre del producto y la fecha de compra. NO

EXISTEN OTRAS GARANTÍAS EXPRESAS NI IMPLÍCITAS. Esta garantía le otorga derechos legales específicos. Es

posible que a usted le asistan otros derechos, que variarán dependiendo del estado o del país. Esta garantía solamente es

válida en los Estados Unidos, Reino Unido, República de Irlanda, Bélgica, Países Bajos, Luxemburgo, Francia, Alemania y

México. Para conocer los términos de garantía en otros países, consulte a su distribuidor local.

Notas de seguridad

Estas notas de seguridad incluyen información importante sobre el montaje, uso y mantenimiento.

Contacto

Fuera de EE. UU., Reino Unido, Irlanda, Benelux, Francia, Alemania o México, póngase en contacto con su distribuidor

para solicitar asistencia o devolver un producto. Desde el interior de los EE.UU., Reino Unido, Irlanda, Benelux, Francia,

Alemania o México, consulte Contact Us al final de este QRG para obtener información de contacto.

Qué va incluido

Para empezar

Desembale su 4BAR Flex Q y asegúrese de que ha recibido todas las partes en buen estado. Si la caja o los

componentes parecen dañados, comuníqueselo inmediatamente al transportista, no a Chauvet.

• Este producto no está concebido para una instalación permanente.

• Conecte este producto SOLO a un circuito con toma de tierra y protegido.

• Desconecte siempre de la alimentación antes de la limpieza o sustitución del fusible.

• NO mire a la fuente de luz cuando el producto esté encendido.

• Asegúrese de que el cable de alimentación no está retorcido ni estropeado.

• Nunca desconecte este producto de la alimentación tirando del cable.

• Cuando monte este producto en alto, use un cable de seguridad.

• NO permita la presencia de materiales inflamables cerca de la unidad cuando esté en funcionamiento.

• NO toque este producto cuando esté en funcionamiento, pues podría estar caliente.

• La tensión del enchufe al que conecte este producto ha de estar en el rango establecido en el grabado

o en el panel posterior del producto.

• ¡Este producto es para uso en interiores solamente! (IP20) Para evitar riesgos de incendio o descarga,

no exponga este producto a la lluvia o la humedad.

• Monte siempre este producto en una ubicación con ventilación adecuada, al menos a 20 in (50 cm)

de superficies adyacentes.

• Asegúrese de que ninguna ranura de ventilación en la carcasa de la unidad queda bloqueada.

• Nunca conecte este producto a un atenuador o reostato.

• Sustituya el fusible con uno del mismo tipo y categoría.

• Use SOLAMENTE los soportes de colgar/montar o las asas para mover este producto.

• La temperatura ambiente máxima es de 104 °F (40 °C). No haga funcionar este producto a

temperaturas más altas.

• En caso de un problema grave de funcionamiento, deje de usarlo inmediatamente.

• NO abra este producto. No contiene piezas reparables por el usuario.

• Para evitar un desgaste innecesario y alargar su vida útil, desconecte completamente el producto

mediante el interruptor o desenchufándolo durante periodos en que no se use.

•4BARFlexQ

• Cable de alimentación

• Pedal inalámbrico

• Soporte para colgar con material de montaje

• Bolsa de transporte

• Guía de referencia rápida

GUÍA DE REFERENCIA RÁPIDA

4BAR Flex Q GRR Rev. 1

Corriente alterna

Este producto tiene una fuente de alimentación con detección automática que puede funcionar con un rango de tensión

de entrada de 100–240 VCA, 50/60 Hz.

Sustitución del fusible

1. Desconecte el producto de la alimentación.

2. Haga cuña con la punta de un destornillador plano en la ranura del porta-fusibles.

3. Saque la tapa de seguridad de la carcasa.

4. Quite el fusible fundido de la sujeción en la parte frontal de la tapa de seguridad y sustituya el fusible con otro

del mismo tipo y categoría.

5. Vuelva a insertar el porta-fusibles y conecte de nuevo la alimentación.

Montaje

Antes de montar este producto, lea las Notas de seguridad. Este producto se puede montar en la mayoría de trípodes y

entramados de truss (utilizando las abrazaderas adecuadas y con/sin los soportes de montaje incluidos) o se puede

montar sobre el suelo.

Diagrama de montaje

Para evitar un desgaste innecesario y alargar su vida útil, desconecte completamente el producto

mediante el interruptor o des enchufándolo durante periodos en que no se use.

Mando de

ajuste del

soporte (x2)

Abrazadera de montaje (x2)

(como la CLP-15N de Chauvet)

Trípode punto de

inserción con mando de

ajuste para apretar

(tripode vendido por separado)

Soporte de

montaje

(x2)

Cable de seguridad

Mando de ajuste de

inclinación de la

unidad (x2 por unidad)

Andere Handbücher für 4BAR Flex T USB

Inhaltsverzeichnis

Sprachen:

Andere Chauvet DJ DJ-Equipment Handbücher

Chauvet DJ

Chauvet DJ FREEDOM FLEX H9 IP x6 Bedienungsanleitung

Chauvet DJ

Chauvet DJ BOB LED Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane Bubble Haze Bedienungsanleitung

Chauvet DJ

Chauvet DJ SM-250 Bedienungsanleitung

Chauvet DJ

Chauvet DJ EVE P-160 RGBW Bedienungsanleitung

Chauvet DJ

Chauvet DJ Intimidator Scan 360 Bedienungsanleitung

Chauvet DJ

Chauvet DJ SHOCKER PANEL 480 Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZLink Par Q6 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane Bubble Haze LT Bedienungsanleitung

Chauvet DJ

Chauvet DJ EVE P-160 RGBW Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORband PiX Mini Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane 1600 Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimBEAM QUAD IRC Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane HAZE 3D Bedienungsanleitung

Chauvet DJ

Chauvet DJ GigBAR MOVE ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ EVE P-100 WW Bedienungsanleitung

Chauvet DJ

Chauvet DJ Vivid Drive 28N Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom Flex H4 IP Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZ Pin Pack 4 Bedienungsanleitung

Chauvet DJ

Chauvet DJ JAM Pack Silver Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom Par T6 Bedienungsanleitung

Chauvet DJ

Chauvet DJ HURRICANE 1800 FLEX Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ LED Shadow Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung