Chauvet DJ GigBAR Flex Bedienungsanleitung

Quick Reference Guide

GigBAR Flex QRG Rev. 1

QUICK REFERENCE GUIDE

About This Guide

The GigBAR Flex Quick Reference Guide (QRG) has basic product information such as mounting, menu

options, and DMX values. Download the User Manual from www.chauvetdj.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance.

Contact

Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your distributor to request support

or return a product. Visit www.chauvetdj.com for contact information.

What is Included

• This product is not intended for permanent installation.

• ONLY connect this product to a grounded and protected circuit.

• DISCONNECT from power before cleaning or replacing the fuse.

• DO NOT look at the light source when the product is on.

• Make sure the power cord is not crimped or damaged.

• Never disconnect this product from power by pulling on the cord.

• When mounting this product overhead, ALWAYS use a safety cable.

• DO NOT allow flammable materials close to the product when it is operating.

• DO NOT touch the product’s housing when it is on because it will be hot.

• The voltage of the outlet to which you areconnectingthis productmust bewithinthe

range stated on the decal or rear panel of the product.

• This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not

expose this product to rain or moisture.

• In the event of a serious operating problem, stop using immediately.

• Always mount this product in a location with adequate ventilation, at least 20 in (50

cm) from adjacent surfaces.

• Be sure that no ventilation slots on the unit’s housing are blocked.

• Never connect this product to a dimmer or rheostat.

• Replace the fuse with the same type and rating.

• Never carry the productby the power cord. Use only the handle to carry this product.

• The maximum ambient temperature is 104 °F (40 °C). Do not operate this product

at higher temperatures.

• DO NOT open this product. It contains no user-serviceable parts.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

• GigBAR Flex

•Powercord

• Carrying bag

• Wireless foot switch

•IRC-6

• Warranty Card

• Quick Reference Guide

QUICK REFERENCE GUIDE

GigBAR Flex QRG Rev. 1

To Begin

Unpack your GigBAR Flex and make sure you have received all parts in good condition. If the box or

contents appear damaged, notify the carrier immediately, not Chauvet.

Overview

LED Display

DMX In/Out

Buttons

Power Out Adjustment

Knobs x4

Power In

Wireless

Antenna

Adjustable Pass- Through

for Tripod mounting

9-Volt Battery

Cover

GigBAR Flex QRG Rev. 1

QUICK REFERENCE GUIDE

AC Power

This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC,

50/60 Hz.

Power Linking

For the maximum number of GigBAR Flex that can be power linked at 120 V or at 230 V, see the User

Manual or the label on the product.

Fuse Replacement

1. Disconnect the product from power.

2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.

3. Pry the safety cap out of the housing.

4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the

exact same type and rating.

5. Re-insert the fuse holder and reconnect power.

IRC-6 (Infrared Remote Control)

The GigBAR Flex is fully compatible with the Infrared Remote Control (IRC-6) from CHAUVET DJ. For

more information on the IRC-6 or to download instructions, go to www.chauvetdj.com.

Mounting

Before mounting this product, read the Safety Notes. This product can be mounted to most tripods,

trussing (using appropriate clamps and with/without the included mounting brackets) or can be used floor/

surface mounted.

Mounting Diagram

To eliminate wear and improve its lifespan, during periods of disuse completely

disconnect the product from power via breaker or by unplugging it.

IR Sensor

Microphone

Mounting

Clamp

(such as CLP-

15 from

Chauvet)

Bracket

Adjustment

Knob

Tripod (sold separately)

Insertion Point w/

Adjustment Knob for

Tightening

QUICK REFERENCE GUIDE

GigBAR Flex QRG Rev. 1

Control Panel Description

Menu Map

BUTTON FUNCTION

<MENU> Exits from the current menu or function

<UP> Navigates upwards through the menu list and increases the numeric value when

in a function

<DOWN> Navigates downwards through the menu list and decreases the numeric value

when in a function

<ENTER> Enables the currently displayed menu or sets the currently selected value into the

selected function

MODE PROGRAMMING LEVELS DESCRIPTION

AUTO Mixed

Effect AM01

F 01–F 99

Selects the auto mixed effect

show

AM02

SOUND

Mixed Effect SM01 Selects the sound mixed effect

show

SM02

Auto Par

Effect

SHOW

AP01–AP07 Selects the Par show

Auto Derby

Effect AK01 Selects the Derby auto speed

Auto Strobe

Effect AS01–AS22 Selects the auto strobe shows

Auto

Par+Derby APK1 Selects the Par and Derby auto

show speed

Auto Par +

Strobe APS1 Selects the Par and strobe show

speed

Auto Derby +

Strobe AKS1 Selectsthe Derbyandstrobe auto

who speed

Par + Derby

+ Strobe APKS Selects the Par, Derby, and

strobe speed

Sound Par

Effect SP01–SP07 Set Pars to Sound mode

SoundDerby

Effect SK01 Sets Derby Lights to Sound mode

Sound

Strobe Effect SS01–SS22 Sets strobes to Sound mode and

selects effect speed

Sound Par +

Derby SPK1 Sets Pars and Derby Lights to

Sound mode

Sound Par +

Strobe SPS1 Sets Pars and strobes to Sound

mode

SoundDerby

+ Strobe SKS1 Sets Derby Lights and strobes to

Sound Mode

Par + Derby

+ Strobe SPKS Sets Pars, Derby Lights and

strobes to Sound mode

GigBAR Flex QRG Rev. 1

QUICK REFERENCE GUIDE

DMX Linking

The GigBAR Flex can work with a DMX controller. Instructions for connecting and configuring this product

for DMX operation are in the User Manual. If you are not familiar with DMX or DIP-switch configuration,

download the DMX Primer from www.chauvetdj.com.

Starting Address

To ensure full access to the two channels available in DMX mode, the highest recommended DMX address

is 510.

Master/Slave Connection

The GigBAR Flex uses the DMX data connection for its Master/Slave mode. Instructions for connecting

and configuring this product for Master/Slave operation are in the User Manual.

General

COLOR

Setting CoLo

R000–R255 Sets both Par and

Derby red values Note:ONLY

3 of the 4

colors may

be used at

the same

time.

G000–G255 Sets both Par and

Derby green

values

B000–B255 Sets both Par and

Derby blue values

U000–U255 Sets the UV

values for the Par

and strobes

DMX Mode

Setting d001–d512

3 CH Sets DMX starting address;

selects the DMX personality DMX

range restricted by number of

channels in the selected DMX

mode

8 CH

20 CH

Master/Slave

Setting Slav Sets to Slave mode

System

Options Sys

dSET 1234 Changes arrangement of pods

rSEt Resets to factory defaults

WiFi on Turns on/off Wi-Fi antenna for

wireless footswitch

off

MODE PROGRAMMING LEVELS DESCRIPTION

QUICK REFERENCE GUIDE

GigBAR Flex QRG Rev. 1

Wireless Foot-Switch Operation

The included wireless foot-switch provides quick access to preset colors, color-change programs, and

sound-activation through the GigBAR Flex microphone. To use the foot-switch:

1. Connect the GigBAR Flex to power. Turn the wireless foot-switch on.

2. Raise the wireless antennas located on the GigBAR Flex and the foot-switch.

3. Press pedal #1 (Auto) to activate Auto program controls. When working, all the lights will begin in

Auto mode (AM01).

4. Use the chart below to activate the desired function..

PEDAL ACTION FUNCTION

(Auto)

1 x press Auto mode Pars, Derby Lights and

strobes (AM01)

2 x press AP01

3 x press AP02

4 x press AK01

5 x press APK1

(Sound)

1 x press Auto mode Pars, Derby Lights and

strobes (SM01)

2 x press SP01

3 x press SP02

4 x press SK01

5 x press SPK1

(Color)

1 x press Red, no strobe

2 x press Green, no strobe

3 x press Blue, no strobe

4 x press UV, no strobe

5 x press Yellow, no strobe

6 x press Pink, no strobe

7 x press Cyan, no strobe

8 x press Dark Pink, no strobe

9 x press Dark Blue, no strobe

10 x press White, no strobe

(Blackout) N/A Immediately turns OFF all the light

fixtures

GigBAR Flex QRG Rev. 1

QUICK REFERENCE GUIDE

DMX Values

20Ch

The GigBAR Flex footswitch will work properly in any mode, with a maximum

unobstructed distance of 50 ft (15.24 m). You must turn on the WiFi on the

GigBAR Flex before using the footswitch.

CHANNEL FUNCTION VALUE PERCENT/SETTING

Par 1

000 255 Red 0-100% Note: You are able

to use a maximum

of 3 colors at a time

2000 255 Green 0-100%

3000 255 Blue 0-100%

4000 255 UV 0-100%

5000 127

128 239

240 249

250 255

Dimmer 0-100%

Strobe speed, slow to fast

Strobe to sound

RGB 100%

Par 2

000 255 Red 0-100% Note: You are able

to use a maximum

of 3 colors at a time

7000 255 Green 0-100%

8000 255 Blue 0-100%

9000 255 UV 0-100%

10 000 127

128 239

240 249

250 255

Dimmer 0-100%

Strobe speed, slow to fast

Strobe to sound

RGB 100%

11 Derby 1

Control

000 024

025 049

050 074

075 099

100 124

125 149

150 174

175 199

200 224

225 255

Blackout

Red

Green

Blue

Red + Green

Red + Blue

Green + Blue

Red + Green + Blue

Automatic (single colors only)

Automatic (two colors at a time)

12 Derby 1

Strobe Rate 000 009

010 239

240 255

No function

Strobe, 0-30 Hz

Strobe to sound

13 Derby 1

Rotation

000 004

005 127

128 133

134 255

Stop

Rotate clockwise, slow to fast

Stop

Rotate counter-clockwise, slow to fast

14 Derby 2

Control

000 024

025 049

050 074

075 099

100 124

125 149

150 174

175 199

200 224

225 255

Blackout

Red

Green

Blue

Red + Green

Red + Blue

Green + Blue

Red + Green + Blue

Automatic (single colors only)

Automatic (two colors at a time)

15 Derby 2

Strobe Rate 000 009

010 239

240 255

No function

Strobe, 0-30 Hz

Strobe to sound

QUICK REFERENCE GUIDE

GigBAR Flex QRG Rev. 1

8Ch

16 Derby 2

Rotation

000 004

005 127

128 133

134 255

Stop

Rotate clockwise, slow to fast

Stop

Rotate counter-clockwise, slow to fast

17 Strobe

Patterns

000 009

010 029

030 069

050 069

070 089

090 109

110 129

130 149

150 169

170 189

190 209

210 255

Blackout

Auto Strobe Program 1

Auto Strobe Program 2

Auto Strobe Program 3

Auto Strobe Program 4

Auto Strobe Program 5

Auto Strobe Program 6

Auto Strobe Program 7

Auto Strobe Program 8

Auto Strobe Program 9

All Strobing

Strobe to sound mode

18 White

Strobe

Dimmer 000 255 White 0-100% Note: Channels 18

& 19 cannot be

used at the same

time.

19 UV Strobe

Dimmer 000 255 UV 0-100%

20 Strobe

Speed 000 255 Slow to fast (for CH18 or CH19)

CHANNEL FUNCTION VALUE PERCENT/SETTING

1Pars and

DerbyColor

000 255 Red 0-100% Note: You are able

to use a maximum

of 3 colors at a time

2000 255 Green 0-100%

3000 255 Blue 0-100%

4000 255 UV 0-100%

5Pars and

Derby

Strobe

Controls

000 127

128 239

240 249

250 255

Dimmer 0-100%

Strobe speed, slow to fast

Strobe to sound

RGB 100%

6DerbyMotor

Rotation

000 004

005 127

128 133

134 255

Stop

Rotate clockwise, slow to fast

Stop

Rotate counter-clockwise, slow to fast

7White

Strobe

Speed 000 054

055 255 White strobe dimmer, 0–100%

White strobe speed, slow to fast Note: Channels 7

& 8cannot be used

at the same time.

8UV Strobe

Speed 000 054

055 255 UV strobe dimmer, 0–100%

UV strobe speed, slow to fast

CHANNEL FUNCTION VALUE PERCENT/SETTING

GigBAR Flex QRG Rev. 1

QUICK REFERENCE GUIDE

3Ch

CHANNEL FUNCTION VALUE PERCENT/SETTING

1LED

Operation

000 009

010 119

120 229

230 234

235 239

240 255

No function

Auto mixed mode 1, fast to slow

Auto mixed mode 2, fast to slow

Sound mixed mode 1

Sound mixed mode 2

Show setting,when channels 2 and 3 activated

2 Operation

000 009

010 026

027 043

044 060

061 077

078 094

095 111

112 128

129 145

146 161

162 178

179 196

197 213

214 230

231 255

No function

Pars on ONLY, doing all single Par show

Derby Lights on ONLY

Strobes on ONLY, doing all single strobe show

Auto Pars and Derby Lights ONLY

Auto Pars and strobes ONLY

Auto strobes and Derby Lights ONLY

Pars, Derby Lights, and strobes

Sound Par effect

Sound Derby effect

Sound strobe effect

Sound Par + Derby

Sound Par + strobe

Sound Derby + strobe

Sound pars, Derby and strobes

3 Auto Speed 000 255 Speed, when 061–111 in channel 2

Andere Handbücher für GigBAR Flex

Inhaltsverzeichnis

Sprachen:

Andere Chauvet DJ DJ-Equipment Handbücher

Chauvet DJ

Chauvet DJ 4BAR Flex T USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR Flex T USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR T12BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom PAR Q9 Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4Bar Quad Bedienungsanleitung

Chauvet DJ

Chauvet DJ Geyser P6 Bedienungsanleitung

Chauvet DJ

Chauvet DJ COREpar Q60 ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ Swarm 5FX Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR LT BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4Play 2 Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORand H9 ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ Gobo Zoom USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORband PiX Mini Bedienungsanleitung

Chauvet DJ

Chauvet DJ XPRESS-RACK 1024 Bedienungsanleitung

Chauvet DJ

Chauvet DJ LX-10 Bedienungsanleitung

Chauvet DJ

Chauvet DJ GOBO ZOO 2 Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR PRO Q USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORband Q3BT ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ FREEDOM CENTERPIECE Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR PRO W USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ Festoon Bedienungsanleitung

Chauvet DJ

Chauvet DJ ILS Command Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom Gobo IP Bedienungsanleitung

Chauvet DJ

Chauvet DJ GigBAR Flex Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung