Chauvet Professional ROGUEOUTCAST3SPOT Bedienungsanleitung

English EN

Español ES

Français FR

Deutsch DE

Nederlands NL

Quick Reference Guide

Model ID: ROGUEOUTCAST3SPOT

QUICK REFERENCE GUIDE

Rogue Outcast 3 Spot QRG Rev. 1

About This Guide

The Rogue Outcast 3 Spot Quick Reference Guide (QRG) has basic product information such as mounting, menu

options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.

For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.

For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and

Germany: www.chauvetlighting.eu/warranty-registration.

Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the

period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This

warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this

warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows

the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This

warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to

country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,

Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance.

• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than

16.4 ft (5 m) is not expected.

• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord

exclusively available from the manufacturer or his service agent.

• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a

similar qualified person.

• The luminaire is intended for professional use only.

• DO NOT open this product. It contains no user-serviceable parts.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the

product from power via breaker or by unplugging it.

• DO NOT look at the light source when the product is on.

• CAUTION: This product’s housing may be hot when lights are operating. Mount this product in a location with

adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

• DO NOT leave any flammable material within 20 cm of this product while operating or connected to power.

• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm humid

ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow

product to fully acclimate to the surrounding environment before connecting it to power.

• USE a safety cable when mounting this product overhead.

• DO NOT submerge this product (IP65). Regular outdoor operation is fine.

• Not for permanent outdoor installation in locations with extreme environmental conditions.

• DO NOT operate this product if the housing, lenses, or cables appear damaged.

• DO NOT connect this product to a dimmer or rheostat.

• ONLY connect this product to a grounded and protected circuit.

• ONLY use the hanging/mounting bracket to carry this product.

• In the event of a serious operating problem, stop using immediately.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.

• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.

• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.

FCC Compliance

This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Contact

Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or

return a product. Refer to Contact Us at the end of this QRG for contact information.

Rogue Outcast 3 Spot QRG Rev. 1

QUICK REFERENCE GUIDE

What is Included

AC Power

This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.

Power Linking

It is possible to link up to 2 Rogue Outcast 3 Spot products at 100 V, 3 products at 120 V, 5 products at 208 V, 6 products

at 230 V, or 6 products at 240 V. Never exceed this number. Power linking cords can be purchased separately.

AC Plug

Replacing the Fuse

1. Disconnect the product from power.

2. Using a flat head screwdriver, unscrew the fuse holder cap from the housing.

3. Remove blown fuse and replace with a good fuse of the same type and rating.

4. Screw the fuse holder cap back in place and reconnect power.

DMX Linking

The Rogue Outcast 3 Spot will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is

available from www.chauvetprofessional.com.

DMX Connection

The Rogue Outcast 3 Spot uses a 5-pin DMX data connection for its DMX personalities:

20CH

and

25CH

. See the User

Manual for information about connecting and configuring the product for DMX operation.

RDM (Remote Device Management)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally

along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers

have this capability. The Rogue Outcast 3 Spot supports RDM protocol that allows feedback to make changes to menu

map options. Download the User Manual from www.chauvetprofessional.com for more details.

• Rogue Outcast 3 Spot

• Seetronic Powerkon IP65 power cord

• 2 omega brackets with mounting hardware

• Quick Reference Guide

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow/Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green

To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

QUICK REFERENCE GUIDE

Rogue Outcast 3 Spot QRG Rev. 1

Mounting

Before mounting this product, read the Safety Notes. Use at least 2 mounting points per product. Make sure the mounting

clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to http://

trusst.com/productcategory/truss-clamps.

Mounting Diagram

Control Panel Description

Button Function

<MENU> Exits from the current menu or function

<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function

<UP> Navigates upwards through the menu list or increases the numeric value when in a function

<DOWN> Navigates downwards through the menu list or decreases the numeric value when in a function

Safety cable

Mounting

clamp (2x)

Omega

bracket (2x)

Overhead mounting Surface mounting

Rogue Outcast 3 Spot QRG Rev. 1

QUICK REFERENCE GUIDE

Menu Map

Refer to the Rogue Outcast 3 Spot product page on

www.chauvetprofessional.com

for the latest menu map.

Main Level Programming Levels Description

Address 001–512 Sets the starting address

Run Mode

DMX 20CH Selects the DMX personality

25CH

Auto Test Auto test all functions

Manual Test

Pan

0–255 Manually control and test all settings

through the control panel

Pan Fine

Tilt

Tilt Fine

P/T Speed

Dimmer

Dimmer Fine

Shutter

Virtual Shaking

Color1

Color2

Gobo2

Gobo

Gobo Rotate

Gobo Index

Gobo2

Focus

Focus Fine

Auto Focus

Zoom

Zoom Fine

Prism

Prism Rotate

Iris

Frost

Special Function

Setup

Pan Reverse NO Normal pan

YES Reversed pan

Tilt Reverse NO Normal tilt

YES Reversed tilt

Screen Reverse

NO Normal screen display

YES Inverted screen display

AUTO Automatic screen orientation

Pan Angle

540 540° pan range

360 360° pan range

180 180° pan range

Tilt Angle

270 270° tilt range

180 180° tilt range

090 90° tilt range

BL.O.P/T Move NO Enable/disable blackout while panning/

tilting

YES

QUICK REFERENCE GUIDE

Rogue Outcast 3 Spot QRG Rev. 1

Setup

(cont.)

BL.O.

ColorMove

NO Enable/disable blackout while color wheel

is moving

YES

BL.O.

GoboMove

NO Enable/disable blackout while gobo wheels

are moving

YES

Backlight Timer

30S Display turns off after 30 seconds

1M Display turns off after 1 minute

5M Display turns off after 5 minutes

ON Display stays on

Swap XY NO Do not swap pan and tilt

YES Pan controls tilt, tilt controls pan

Loss of Data Hold Holds last signal received

Close Blacks out fixture

Fans

Auto Fan speed set by product temperature

ECO Quiet mode

Full Fan speed set on high

Dimmer Curve

Linear

Set the dimmer curve

Square

I Squa

SCurve

Linear2

PWM Option

600Hz

Sets the PWM frequency

1200Hz

2000Hz

4000Hz

6000Hz

15000Hz

USB Update NO Update firmware via USB C

YES

Reset

Pan/Tilt

YES Reset individual functions or all functions

from start-up

Prism

Color/Iris

Gobo/Gobo2

Frost

All

Factory Set NO Reset to factory default settings

YES

Sys Info

Ver V_ Shows firmware version

Running Mode _ _ _ Shows current running mode

DMX Address _ _ _ Shows current DMX address

Temperature _ _ _ Shows the product temperature in °C

Fixture Hours _ _ _ _ _ Shows time product has been on

LED Hours _ _ _ _ _ Shows time LED has been on

UID _ _ _ _ _ _ _ _ Shows UID information

_Fan_ _ _ _ (x3) _ _ _ _ _ Shows speeds of fans

Base Fan1 _ _ _ _ _ Shows speed of base fan

Main Level Programming Levels Description

Rogue Outcast 3 Spot QRG Rev. 1

QUICK REFERENCE GUIDE

DMX Values

20CH 25CH Function Value Percent/Setting

11Pan 000 255 0–100%

2 2 Fine pan 000 255 Fine control (16-bit)

33Tilt 000 255 0–100%

4 4 Fine tilt 000 255 Fine control (16-bit)

5 5 Pan/tilt speed 000 255 Fast to slow

6 6 Dimmer 000 255 0–100%

– 7 Fine dimmer 000 255 Fine control (16-bit)

78Strobe

000 003 Off

004 007 On

008 076 Synchronized strobe, slow to fast

077 145 Pulse strobe, slow to fast

146 215 Random strobe, slow to fast

216 255 On

8 9 Virtual shaking

000 001 No function

002 128 Shaking effect, slow to fast

129 255 Fade effect, slow to fast

9 10 Color wheel 1

000 006 Open

007 013 Yellow

014 020 Light blue

021 027 Green

028 034 Red

034 041 Magenta

042 048 Dark blue

049 059 Orange

060 187 Color wheel indexing

188 219 Color scroll, fast to slow

220 223 Stop

224 255 Reverse color scroll, slow to fast

10 11 Color wheel 2

000 006 Open

007 013 CTO 3200K

014 020 CTO 5600K

021 027 Green

028 034 UV

034 041 Orange

042 048 Pink

049 059 Light blue

060 187 Color wheel indexing

188 219 Color scroll, fast to slow

220 223 Stop

224 255 Reverse color scroll, slow to fast

QUICK REFERENCE GUIDE

Rogue Outcast 3 Spot QRG Rev. 1

11 12 Gobo wheel 1

(see Gobo Wheels)

001 007 Open

008 015 Gobo 1

016 023 Gobo 2

024 031 Gobo 3

032 039 Gobo 4

040 047 Gobo 5

048 055 Gobo 6

056 063 Gobo 7

064 071 Gobo 7 shaking, slow to fast

072 079 Gobo 6 shaking, slow to fast

080 087 Gobo 5 shaking, slow to fast

088 095 Gobo 4 shaking, slow to fast

096 103 Gobo 3 shaking, slow to fast

104 111 Gobo 2 shaking, slow to fast

112 119 Gobo 1 shaking, slow to fast

120 127 Open

128 191 Gobo scroll, slow to fast

192 255 Reverse gobo scroll, slow to fast

12 13 Gobo wheel 1 rotate

000 063 Gobo index

064 145 Rotation, fast to slow

146 149 Stop

150 231 Reverse rotation, slow to fast

232 255 Alternating clockwise/counterclockwise rotation, short to long

– 14 Fine gobo rotation 000 255 Fine control (16-bit)

13 15 Gobo wheel 2

(see Gobo Wheels)

000 005 Open

006 011 Gobo 1

012 017 Gobo 2

018 023 Gobo 3

024 029 Gobo 4

030 035 Gobo 5

036 041 Gobo 6

042 047 Gobo 7

048 053 Gobo 8

054 063 Gobo 9

064 069 Gobo 9 shaking, slow to fast

070 075 Gobo 8 shaking, slow to fast

076 081 Gobo 7 shaking, slow to fast

082 087 Gobo 6 shaking, slow to fast

088 093 Gobo 5 shaking, slow to fast

094 099 Gobo 4 shaking, slow to fast

100 105 Gobo 3 shaking, slow to fast

106 111 Gobo 2 shaking, slow to fast

112 117 Gobo 1 shaking, slow to fast

118 127 Open

128 191 Gobo scroll, slow to fast

192 255 Reverse gobo scroll, slow to fast

14 16 Focus 000 255 0–100%

20CH 25CH Function Value Percent/Setting

Rogue Outcast 3 Spot QRG Rev. 1

QUICK REFERENCE GUIDE

– 17 Fine focus 000 255 Fine control (16-bit)

– 18 Auto focus

000 010 No function

011 030 0-5 meters

031 050 6 meters

051 070 7 meters

071 090 8 meters

091 110 9 meters

111 130 10 meters

131 150 12.5 meters

151 170 15 meters

171 190 17.5 meters

191 210 20-60 meters

211 255 Auto detect distance

15 19 Zoom 000 255 0–100%

– 20 Zoom fine 000 255 Fine control (16-bit)

16 21 Prism 000 004 No function

005 255 Prism insert

17 22 Prism rotate

000 127 Prism index

128 189 Clockwise rotation, fast to slow

190 193 Stop

194 255 Counterclockwise rotation, slow to fast

18 23 Iris

000 063 Big to small

064 127 Auto change, slow to fast

128 191 Slow open, fast close, slow to fast

192 255 Fast open, slow close, slow to fast

19 24 Frost 000 255 0–100%

20CH 25CH Function Value Percent/Setting

QUICK REFERENCE GUIDE

Rogue Outcast 3 Spot QRG Rev. 1

Gobo Wheels

20 25 Control

(3 second hold)

000 007 No function

008 015 Blackout during pan/tilt

016 023 Blackout while color wheels are moving

024 031 Blackout while gobo wheels are moving

032 039 Blackout during pan/tilt/color wheel

040 047 Blackout during pan/tilt/gobo wheels

048 055 Blackout during pan/tilt/color wheel/gobo wheels

056 095 No function

096 103 Pan reset

104 111 Tilt reset

112 119 Color wheels reset

120 127 Gobo wheels reset

128 135 No function

136 143 Prism reset

144 151 No function

152 159 All reset

160 167 Iris reset

168 175 Frost reset

176 183 Zoom reset

184 191 Fan ECO

192 199 Fan Full

200 215 Fan Auto

216 255 No function

20CH 25CH Function Value Percent/Setting

Gobo wheel 1 Gobo wheel 2

Inhaltsverzeichnis

Sprachen:

Andere Chauvet Professional Beleuchtungsausrüstung Handbücher

Chauvet Professional

Chauvet Professional REM-RB200CM IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick MK3 Profile Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado 2 Zoom Tour Bedienungsanleitung

Chauvet Professional

Chauvet Professional Well Panel Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKE 4 Bedienungsanleitung

Chauvet Professional

Chauvet Professional REM-RB100CMIP Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-H7XIP Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORSTRIKEM Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKEARRAY2 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Strike Array 2 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-915FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado 2 Zoom Tour Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLOR Strike M Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-265WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-Q12 IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKEARRAY4 Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-Quad 18 Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION P-56VW Bedienungsanleitung

Chauvet Professional

Chauvet Professional MT-07 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Silens 2 Profile Bedienungsanleitung

Chauvet Professional

Chauvet Professional Vesuvio RGBA Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation H-55WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Colorado 1 Quad Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado Panel Q40 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung