Chauvet COLORstrip Bedienungsanleitung

Quick Reference Guide

COLORstrip™ QRG

Page 2 of 8

About This

Guide

The COLORstrip™ Quick Reference Guide (QRG) contains the product’s

connection and mounting information, as well as the menu options

and the

DMX values.

Disclaimer

•See this product’s User Manual for detailed information and

instructions. You can download the User Manual from the

CHAUVET® website: www.chauvetlighting.com.

•Read ALL the disclaimers and Safety N

otes in this document as well as

those in the product’s User Manual before installing, operating, or

maintaining this product.

Safety Notes

These Safety Notes include important safety information about installation,

usage, and maintenance.

•Always connect this product to a grounded circuit to avoid the risk of

electrocution.

•Always disconnect from the power source before cleaning this product

or replacing the fuse.

•Avoid direct eye exposure to the light source while the product is on.

•Make sure the power cord is not crimped or damaged.

•If mounting this product overhead, always secure it to a fastening

device using a safety cable.

•Make sure there are no flammable materials close to the unit while

operating.

•Do not touch this product’s housing when operating because it may be

very hot.

•Always make sure that the voltage of the outlet to which you are

connecting this product is within the range stated on the decal or rear

panel of the product.

•This product is for indoor use only! (IP20) To prevent risk of fire or

shock, do not expose this product to rain or moisture.

•

Always install this product in a location with adequate ventilation, at

least 20 in (50 cm) from adjacent surfaces.

•Be sure that no ventilation slots on the unit’s housing are blocked.

•Never connect this product to a dimmer.

•Make sure to replace the fuse with the same type and rating.

•Never carry this product from the power cord or any moving part.

Always use the hanging/mounting bracket or the handles.

•The maximum ambient temperature is 104° F (40° C). Do not operate

this product at higher temperatures.

•In the event of a serious operating problem, stop using the unit

immediately.

•Never try to repair this product. Repairs performed by unauthorized

technicians can lead to damage or malfunction. Please contact the

nearest authorized technical assistance center.

COLORstrip™ QRG

Page 3 of 8

What Is

Included

•COLORstrip™

•Power Cord

•Warranty Card

•Quick Reference Guide

Product

Description

The COLORstrip™ is a full-size, linear wash light for use in up-lighting

applications or for eye candy effects. Fully compatible with the Satellite™

battery-operated system, you can create additional

effects by linking

multiple strips together to make runway chases.

Product Overview

AC Power

This product has an auto-ranging power supply that can work with an input

voltage range of 100~240 VAC, 50/60 Hz.

Power Linking

You can link up to fifteen (15) COLORstrip™ units at 120 VAC and

twenty-eight (28) units at 230 VAC. Never exceed these numbers.

Fuse

Replacement

To replace the fuse in the COLORstrip™, use the following steps:

1. Disconnect this product from the power outlet.

2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.

3. Pry the safety cap out of the housing pulling out the installed fuse.

4. Remove the blown fuse from the safety cap and replace with a fuse of

the exact same type and rating.

5. Insert the fuse holder back in place and reconnect power.

Power In

LED Display

Fuse Holder

Power Out

Footswitch Controller Input

Sound Sensitivity Knob

Microphone

Safety Loop

Master/Slave

Output

Satellite™ D-Fi

Output

DMX In/Out

COLORstrip™ QRG

Page 4 of 8

Programming

For details on how to program this product, see the User Manual.

Control Panel

Description

Button Function

<MENU>

Exits from the current menu or function.

<UP>

Navigates upwards through the menu list and increases the

numeric value when in a function.

<DOWN>

Navigates downwards through the menu list and decreases the

numeric value when in a function.

<ENTER>

Enables the currently displayed menu or sets the currently

selected value into the selected function.

Menu Options

Main Level Programming Levels Description

ACt

Automatic Operation

(extra levels not available in

all programs)

A000-A023

F000-F100

Flash speed (slow to fast)

P000-P100

Run speed (slow to fast)

C000-C100 Color

SYS

SdAd

000-509

Set DMX address

SAAd

Reset software

COLORstrip™ QRG

Page 5 of 8

DMX Linking

The COLORstrip™ can work with a DMX controller when linked using a

regular DMX serial connection.

If you are not familiar with the DMX standard, download the DMX Primer

from www.chauvetlighting.com.

DMX

Connection

The COLORstrip™ uses a regular DMX data connection for its DMX

personality.

Download the COLORstrip™ User Manual. Refer to the Setup chapter

learn how to connect this product for DMX operation

. To learn how to

configure this product for DMX operation, refer to the Operation chapter.

Start Address

To ensure full access to all channels in each DMX mode, the highest

recommended DMX address is 509.

Master/Slave

Connection

The COLORstrip™ uses the DMX data connection for its Master/Slave

mode.

Download the COLORstrip™ User Manual. Refer to the Setup

chapter to

learn how to connect this product for Master/Slave operation. To learn

how

to configure this product for Master/Slave operation, refer to the

Operation

chapter.

Master/Slave

Runway Effect

The COLORstrip™ uses the Master/Slave Output connection for the runway

effect.

Download the COLORstrip™ User Manual’s Operation chapter to learn

how to configure this product for the Master/Slave runway effect.

COLORstrip™ QRG

Page 6 of 8

DMX Values

4-CH

Channel

Function

Value CH. 2 CH. 3 CH. 4

Blackout

000 009

Flash speed

000 249

Sound-Active

250 255

Red

010 019

Green

020 029

Blue

030 039

Yellow

040 049

Purple

050 059

Cyan

060 069

White

070 079

Color Change 1

080 089

Run Speed

Automatic

000 127

Sound-Active

128 255

Flash speed

000 249

Sound Active

250 255

Color Change 2

090 099

Color Change

3 100 109

Color Change 4

110



119

Color Change 5

120 129

Color Change 6

130 139

Sequential Color

Chase 1

140 149

Sequential Color

Chase 2

150 159

Sequential Color

Chase 3

160 169

Sequential Color

Chase 4

170 179

Sequential Color

Chase 5

180 189

Sequential Color

Chase 6

190 199

Sequential Color

Chase 7

200 209

RGB Color Mix

RGB Mode

210 219

Red

(0~100%)

Green

(0~100%)

Blue

(0~100%)

Color Fade

220 229

Fade Speed

(0~100%)

Auto Run (sound

active only

230 255

COLORstrip™ QRG

Page 7 of 8

Mounting

Before mounting this product, read the Safety Notes at the beginning of this

guide and in the product’s User Manual. The mounting instructions are

provided in the Setup chapter of the User Manual.

Product

Mounting

Diagram

Mounting Brackets

COLORstrip™ QRG

Page 8 of 8

World Headquarters

CHAUVET®

General Information

Address: 5200 NW 108th Avenue

Sunrise, FL 33351

Voice: (954) 929-1115

Fax: (954) 929-5560

Toll free: (800) 762-1084

United Kingdom and Ireland

CHAUVET® Europe Ltd.

General Information

Address: Unit 1C

Brookhill Road Industrial Estate

Pinxton, Nottingham, UK

NG16 6NT

Voice: +44 (0)1773 511115

Fax: +44 (0)1773 511110

Technical Support

Voice: (954) 929-1115 (Press 4)

Fax: (954) 756-8015

Email: tech@chauvetlighting.com

Technical Support

Email: uktech@chauvetlighting.com

World Wide Web

www.chauvetlighting.com

World Wide Web

www.chauvetlighting.co.uk

Outside the U.S., United Kingdom, or Ireland, contact your distributor of

record. Follow their instructions to request support or to

return a product.

Visit our website for contact details.

COLORstrip™ QRG – Rev. 1

Printed in the P. R. C.

Andere Handbücher für COLORstrip

Inhaltsverzeichnis

Andere Chauvet Scheinwerfer Handbücher

Chauvet

Chauvet GigBAR IRC Bedienungsanleitung

Chauvet

Chauvet COLORado Ridge IP Bedienungsanleitung

Chauvet

Chauvet PowerStream 4 Bedienungsanleitung

Chauvet

Chauvet SlimPAR HEX 3 IRC Bedienungsanleitung

Chauvet

Chauvet LED-RAIN36 Bedienungsanleitung

Chauvet

Chauvet SNAPSHOT LED PAR 38 TRI-B Bedienungsanleitung

Chauvet

Chauvet Scorpion Script Bedienungsanleitung

Chauvet

Chauvet COLORado 2-Quad Zoom IP Bedienungsanleitung

Chauvet

Chauvet Mini Line Dancer CH-215A Bedienungsanleitung

Chauvet

Chauvet Q-WASH 560Z-LED Bedienungsanleitung

Chauvet

Chauvet S-MOVER DMX512 Bedienungsanleitung

Chauvet

Chauvet COLORdash Par-Q12 IP Bedienungsanleitung

Chauvet

Chauvet Stage Designer 50 Bedienungsanleitung

Chauvet

Chauvet Data Stream 4 Bedienungsanleitung

Chauvet

Chauvet LEDsplash 200B Bedienungsanleitung

Chauvet

Chauvet nexus 4x1 Bedienungsanleitung

Chauvet

Chauvet Freedom Par Quad 4 IP Bedienungsanleitung

Chauvet

Chauvet Laser Wizard CH-505 Bedienungsanleitung

Chauvet

Chauvet Legend 412 QRG Bedienungsanleitung

Chauvet

Chauvet Epix Drive 642 Bedienungsanleitung

Chauvet

Chauvet Megta Strobe FX12 Bedienungsanleitung

Chauvet

Chauvet next NXT-1 Bedienungsanleitung

Chauvet

Chauvet LED PAR 38-18UVB Bedienungsanleitung

Chauvet

Chauvet Intimidator Barrel LED 300 Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung