Chauvet Intimidator Barrel LED 300 Bedienungsanleitung

Quick Reference Guide

Intimidator™ Scan LED 300 QRG EN

About This

Guide

The Intimidator™ Scan LED 300 Quick Reference Guide (QRG) has basic

product information such as mounting, menu options, and DMX values.

Download the User Manual from www.chauvetlighting.com

for more

details.

Disclaimer

The information and specifications contained in this QRG are subject to

change without notice.

Safety Notes

These Safety Notes include important information about installation, use,

and maintenance.

•This product is not intended for permanent installation.

•ONLY connect this product to a grounded and protected circuit.

•Always disconnect from power before cleaning or replacing the fuse.

•DO NOT look at the light source when the product is on.

•Make sure the power cord is not crimped or damaged.

•Never disconnect this product from power cord by pulling on the cord.

•When mounting this product overhead, use a safety cable.

•DO NOT allow flammable materials close to the unit while operating.

•DO NOT touch this product when it is operating because it may be hot.

•The voltage of the outlet to which you are connecting this product must

be within the range stated on the decal or rear panel of the product.

•This product is for indoor use only! (IP20) To prevent risk of fire or

shock, do not expose this product to rain or moisture.

•Always mount this product in a location with adequate ventilation, at

least 20 in (50 cm) from adjacent surfaces.

•Be sure that no ventilation slots on the unit’s housing are blocked.

•Never connect this product to a dimmer or rheostat.

•Replace the fuse with the same type and rating.

•ONLY use the hanging/mounting bracket to carry this product.

•The maximum ambient temperature

is 104° F (40° C). Do not operate this

product at higher temperatures.

•In the event of a serious operating problem, stop using immediately.

•

DO NOT open this product. It contains no user-serviceable parts.

Contact

Outside the U.S., United Kingdom, or Ireland, contact your distributor to

request support or return a product. Visit www.chauvetlighting.com

for

contact information.

EN Intimidator™ Scan LED 300 QRG

What Is

Included

•Intimidator™ Scan LED 300

•Hanging Bracket with Mounting

Hardware (preinstalled)

•Power Cord

•Warranty Card

•Quick Reference Guide

To Begin

Unpack your Intimidator™ Scan LED 300 and make sure you have

received all parts in good condition. If the box or contents appear damaged,

notify the carrier immediately, not CHAUVET®.

Product

Description

The Intimidator™ Scan LED 300 is a compact, bright LED scanner with a

3-sided prism that duplicates the beam for great effects over

a large

coverage area. Power linking saves time running cords, and built-in sound-

activated programs dance to the beat of the music.

Product Overview

AC Power

This product has a switchable power supply that can work with an input

voltage of 115 VAC or 240 VAC, 50/60 Hz.

Power Linking

You can link up to 3 Intimidator™ Scan LED 300 products at 120 VAC and

7 units at 230 VAC.

Fuse Replacement

1.Disconnect the product from power.

2.Using a flat-head screwdriver, loosen the fuse holder and pull straight

out.

3.Remove the blown fuse from the holder and replace with a fuse of the

exact same type and rating.

4.Re-insert the fuse holder and reconnect power.

Fuse Holder

DMX In/Out

Power Out

Power In

Voltage Switch

Intimidator™ Scan LED 300 QRG EN

Mounting

Before mounting this product, read the Safety Notes.

Mounting

Diagram

Control Panel

Description Button Function

Exits from the current menu or function

<UP>

Navigates upwards through the menu list and increases the

numeric value when in a function

<DOWN>

Navigates downwards through the menu list and decreases the

numeric value when in a function

<ENTER>

Enables the currently displayed menu or sets the currently

selected value into the selected function

Rubber Feet (x4)

Clamps

Safety Cable

Mounting

Bracket

Adjustment

Knob

EN Intimidator™ Scan LED 300 QRG

Menu Options

DMX Linking

The Intimidator™ Scan LED 300 can work with a DMX controller when

linked by DMX serial connections. Instructions for connecting and

configuring this product for DMX operation are in the User Manual. If you

are not familiar with DMX, download the DMX Primer from

www.chauvetlighting.com.

Starting Address

To ensure full access to all channels in each DMX mode, the highest

recommended DMX address is 502.

Master/Slave

Connection

The Intimidator™ Scan LED 300 uses the DMX data connection for its

Master/Slave mode. Instructions for connecting and configuring this product

for Master/Slave operation are in the User Manual.

Menu Programming Steps Description

DMX Mode

d001

d001~512

DMX starting address

Standalone

Mode NASL

NASL

SLAu

SoN

Standalone: Slave receive mode

NStS

SrUn

Standalone: Slow

NAFA

FASt

Standalone: Sound-active

Pan Invert PAN rPAN Pan invert

Tilt Invert tit rtit Tilt invert

Display Invert diS rdiS Invert the display

DMX

Personality

11CH

8CH

8-channel DMX personality

11CH

11-channel DMX personality

Reset rESt

Reset all motors to correct any errors

with motors misaligning during

operation

Load Default LoAd

Revert all settings back to the factory

default

Intimidator™ Scan LED 300 QRG EN

DMX Values

11-CH

Channel Function Value

Percent/Setting

Pan

000 255

0~180°

Tilt

000 255

0~90°

3 Color

000 006

Open (white)

007 013

Yellow

014 020

Pink

021 027

Green

028 034

Peachblow

035 041

Light Blue

042 048

Kelly Green

049 055

Red

056 063

Dark Blue

064 070

White + Yellow (split colors)

071 077

Yellow + Pink (split colors)

078 084

Pink + Green (split colors)

085 091

Green + Peachblow (split colors)

092 098

Peachblow + Blue (split colors)

099 105

Light Blue + Kelly Green (split colors)

106 112

Kelly Green + Red (split colors)

113 119

Red + Dark Blue (split colors)

120 127

Dark Blue + White (split colors)

128 191

Rotate clockwise (slow fast)

192 255

Rotate counterclockwise (slow fast)

4 Shutter

000 003

Closed

004 007

Open

008 215

Strobe (slow fast)

216 255

Open

Dimmer

000 255

0~100%

6 Gobo Wheel

000 007

Open

008 015

Gobo 1 (glass)

016 023

Gobo 2 (glass)

024 031

Gobo 3

032 039

Gobo 4

040 047

Gobo 5

048 055

Gobo 6

056 063

Gobo 7

EN Intimidator™ Scan LED 300 QRG

DMX Values (cont.)

11-CH (cont.)

Channel

Function

Value

Percent/Setting

6 Gobo Wheel (cont.)

064 071

Gobo 7 shake, fast to slow

072 079

Gobo 6 shake, fast to slow

080 087

Gobo 5 shake, fast to slow

088 095

Gobo 4 shake, fast to slow

096 103

Gobo 3 shake, fast to slow

104 111

Gobo 2 (glass) shake, (fast slow)

012 119

Gobo 1 (glass) shake, (fast slow)

120 127

Open

128 191

Gobo scroll: Clockwise rotation

192 255

Gobo scroll: Counterclockwise rotation

7 Gobo Rotation

000 015

Stop

016 127

Rotate Counterclockwise (slow fast)

028 239

Rotate Clockwise (slow fast)

240 255

Gobo bounce

8 Prism

000 003

Prism

004 255

Stop, static prism effect

Focus

000 003

Near Far

10 Operating Mode

000 007

No function

008 015

Pan/tilt move-in-black

016 023

Pan/tilt move-in-black (disable)

024 031

Color wheel move-in-black

032 039

Color wheel move-in-black (disable)

040 047

Gobo wheel move-in-black

048 055

Gobo wheel move-in-black (disable)

056 063

Fast movement

064 087

Fast movement (disable)

088 095

All movement move-in-black (disable)

096 103

Reset pan/tilt

104 111

No function

112 119

Reset color wheel

120 127

Reset gobo wheel

128 135

No function

136 143

Reset prism

144 151

Reset focus

152 159

Reset all

160 255

No function

Intimidator™ Scan LED 300 QRG EN

DMX Values (cont.)

8-CH

Channel

Function

Value

Percent/Setting

Pan

000 255

0~180°

Tilt

000 255

0~90°

3 Color

000 006

Open (white)

007 013

Yellow

014 020

Pink

021 027

Green

028 034

Peachblow

035 041

Light Blue

042 048

Kelly Green

049 055

Red

056 063

Dark Blue

064 070

White + Yellow (split colors)

071 077

Yellow + Pink (split colors)

078 084

Pink + Green (split colors)

085 091

Green + Peachblow (split colors)

092 098

Peachblow + Blue (split colors)

099 105

Light Blue + Kelly Green (split colors)

106 112

Kelly Green + Red (split colors)

113 119

Red + Dark Blue (split colors)

120 127

Dark Blue + White (split colors)

128 191

Rotate clockwise (slow fast)

192 255

Rotate counterclockwise (slow fast)

11-CH (cont.)

Channel

Function

Value

Percent/Setting

11 Movement Macros

000 007

No function

008 023

Automatic 1

024 039

Automatic 2

040 055

Automatic 3

056 071

Automatic 4

072 087

Automatic 5

088 103

Automatic 6

104 119

Automatic 7

120 135

Automatic 8

136 151

Sound 1

152 167

Sound 2

168 183

Sound 3

184 199

Sound 4

200 215

Sound 5

216 231

Sound 6

232 247

Sound 7

248 255

Sound 8

EN Intimidator™ Scan LED 300 QRG

DMX Values (cont.)

8-CH (cont.)

Channel Function Value Percent/Setting

4 Shutter

000 003

Closed

004 007

Open

008 215

Strobe (slow fast)

216 255

Open

5 Gobo Wheel

000 007

Open

008 015

Gobo 1 (glass)

016 023

Gobo 2 (glass)

024 031

Gobo 3

032 039

Gobo 4

040 047

Gobo 5

048 055

Gobo 6

056 063

Gobo 7

064 071

Gobo 7 shake, fast to slow

072 079

Gobo 6 shake, fast to slow

080 087

Gobo 5 shake, fast to slow

088 095

Gobo 4 shake, fast to slow

096 103

Gobo 3 shake, fast to slow

104 111

Gobo 2 (glass) shake, (fast slow)

012 119

Gobo 1 (glass) shake, (fast slow)

120 127

Open

128 191

Gobo scroll: Clockwise rotation

192 255

Gobo scroll: Counterclockwise rotation

6 Gobo Rotation

000 015

Stop

016 127

Rotate Counterclockwise (slow fast)

028 239

Rotate Clockwise (slow fast)

240 255

Gobo bounce

7 Prism

000 003

Prism

004 255

Stop, static prism effect

Focus

000 003

Near Far

Intimidator™ Scan LED 300 GRR ES

Acerca de Esta

Guía

La Guía de Referencia Rápida (GRR) del Intimidator™ Scan LED 300

contiene información básica sobre el producto, como montaje, opciones de

menú y valores DMX.

Descargue el manual de usuario de

www.chauvetlighting.com para una información más detallada.

Exención de

Responsabilidad

La información y especificaciones contenidas en esta GRR están sujetas a

cambio sin previo aviso.

Notas de

Seguridad

Estas notas de seguridad incluyen información de seguridad importante sobre

el montaje, uso y mantenimiento.

•Este producto no está concebido para una instalación permanente.

•Conecte este producto SOLO a un circuito con toma de tierra y protegido.

•

Desconecte siempre de la alimentación antes de lalimpieza o sustitución

del fusible.

•NO mire a la fuente de luz cuando el producto esté encendido.

•

Asegúrese de que el cable de alimentación no está retorcido ni estropeado.

•Nunca desconecte este producto del cable de alimentación agarrando o

tirando del cable.

•Cuando monte este producto en alto, use un cable de seguridad.

•NO permita la presencia de materiales inflamables cerca de la unidad

cuando esté en funcionamiento.

•NO toque este producto cuando esté en funcionamiento, pues podría estar

caliente.

•La tensión del enchufe al que conecte este producto ha de estar en el rango

establecido en el grabado o en el panel posterior de producto.

•¡Este producto es para uso en interiores solamente! (IP20) Para evitar

riesgos de incendio o descarga, no exponga este producto a la lluvia o la

humedad.

•

Monte siempre este producto en una ubicación con ventilación adecuada, al

menos a 50 cm de superficies adyacentes.

•Asegúrese de que ninguna ranura de ventilación en la carcasa de la unidad

queda bloqueada.

•Nunca conecte este producto a un atenuador o reostato.

•Sustituya el fusible con uno del mismo tipo y categoría.

•Use SOLAMENTE los soportes de colgar/montar o las asas para mover

este producto. NO lo transporte sujetando por la cabeza móvil.

•La máxima temperatura ambiente es de 104º F (40º C). No haga funcionar

este producto a temperaturas más altas.

•En caso de un problema grave de funcionamiento, deje de usarlo

inmediatamente.

•NO abra este producto. No contiene piezas reparables por el usuario.

Contacto

Fuera de EE.UU, Reino Unido o Irlanda, póngase en contacto con su

distribuidor para solicitar asistencia o devolver el producto. Visite

www.chauvetlighting.com para información de contacto.

Andere Handbücher für Intimidator Barrel LED 300

Inhaltsverzeichnis

Sprachen:

Andere Chauvet Scheinwerfer Handbücher

Chauvet

Chauvet OVATION Bedienungsanleitung

Chauvet

Chauvet SlimPAR HEX 6 IRC Bedienungsanleitung

Chauvet

Chauvet COLORado 1 VW Bedienungsanleitung

Chauvet

Chauvet Q-Spot 560-LED Bedienungsanleitung

Chauvet

Chauvet GigBAR IRC Bedienungsanleitung

Chauvet

Chauvet ROGUE RH1 Hybrid Bedienungsanleitung

Chauvet

Chauvet Swarm 4FX Bedienungsanleitung

Chauvet

Chauvet COLORstrip Bedienungsanleitung

Chauvet

Chauvet Line Dancer CH-300 Bedienungsanleitung

Chauvet

Chauvet Intimidator Barrel LED 300 Bedienungsanleitung

Chauvet

Chauvet COLORado 1 Tour Bedienungsanleitung

Chauvet

Chauvet Vue 2.1 Bedienungsanleitung

Chauvet

Chauvet Scorpion GVC Bedienungsanleitung

Chauvet

Chauvet COLORado 2-Quad Zoom IP Bedienungsanleitung

Chauvet

Chauvet LEDrain 56 Bedienungsanleitung

Chauvet

Chauvet Swarm 4 Bedienungsanleitung

Chauvet

Chauvet HURRICANE 1100 Bedienungsanleitung

Chauvet

Chauvet GigBar LT Bedienungsanleitung

Chauvet

Chauvet Nexus Aw 7x7 Bedienerhandbuch

Chauvet

Chauvet Q-WASH 560Z-LED Bedienungsanleitung

Chauvet

Chauvet LED PAR 38-18UVB Bedienungsanleitung

Chauvet

Chauvet Ovation ED-190WW Bedienungsanleitung

Chauvet

Chauvet TFX-900 Stage Wash Bedienungsanleitung

Chauvet

Chauvet 4BAR Tri Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung