Checkpoint QUANTUM FORCE 19000 Bedienungsanleitung

31 December 2023

QUANTUM FORCE 19000

AND 29000 APPLIANCES

RR1-CP-25, RR1-CP-10, and RR1-CP-20

Getting Started Guide

Check Point Copyright Notice

distributed under licensing restricting their use, copying, distribution, and decompilation. No

part of this product or related documentation may be reproduced in any form or by any means

without prior written authorization of Check Point. While every precaution has been taken in

the preparation of this book, Check Point assumes no responsibility for errors or omissions.

This publication and features described herein are subject to change without notice.

RESTRICTED RIGHTS LEGEND:

Use, duplication, or disclosure by the government is subject to restrictions as set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at

DFARS 252.227-7013 and FAR 52.227-19.

TRADEMARKS:

Refer to the Copyright page for a list of our trademarks.

Refer to the Third Party copyright notices for a list of relevant copyrights and third-party

licenses.

Important Information

Quantum Force 19000 and 29000 Appliances Getting Started Guide|3

Important Information

Latest Software

We recommend that you install the most recent software release to stay up-to-

date with the latest functional improvements, stability fixes, security

enhancements and protection against new and evolving attacks.

Certifications

For third party independent certification of Check Point products, see the Check

Point Certifications page.

Check Point Quantum Force 19000 and 29000 Appliances Getting Started

Guide

For more about this release, see the home page.

Latest Version of this Document in English

Open the latest version of this document in a Web browser.

Download the latest version of this document in PDF format.

Feedback

Check Point is engaged in a continuous effort to improve its documentation.

Please help us by sending your comments.

Important Information

Quantum Force 19000 and 29000 Appliances Getting Started Guide|4

Revision History

Date Description

31 December 2023 Improved formatting and layout

4 December 2023 Updated:

"Front Panel LEDs" on page47

23 November 2023 Updated:

"Configuring Appliances" on page37

"Support" on page62

13 November 2023 Added:

"AC Power Cords" on page57

23 October 2023 First release of this document

Table of Contents

Quantum Force 19000 and 29000 Appliances Getting Started Guide|5

Table of Contents

Safety, Environmental, and Electronic Emissions Notices

Sicherheits-, Umwelt- und EMV-Hinweise

Remarques relatives à la sécurité, l'environnement et les émissions électroniques

Declaration of Conformity

Introduction

Welcome

Quantum Force 19200, 29100, and 29200 Appliances Overview

Shipping Carton Contents

Terminology

Mounting the Appliances in a Rack

Appliance Specifications

Appliance Air Vents

Configuring Appliances

Initial Configuration

Connecting to the Appliance CLI

Starting the Appliance

Available Software Images

Creating the Network Object

Synchronizing RAID

19000 / 29000 Appliances Hardware

Front Panel

19200

29100 / 29200

Front Panel LEDs

Synchronization Port LEDs

Management Port LEDs

System LEDs

Table of Contents

Quantum Force 19000 and 29000 Appliances Getting Started Guide|6

Rear Panel

19200 / 29100 / 29200

Cooling Fan Units Naming Convention

Installing the Power Cable Restraint

Lights Out Management

Dual Redundant BIOS

PSU Configuration and Monitoring

AC Power Cords

Replacing and Upgrading Components

Restoring Factory Defaults

Restoring in Gaia Portal

Restoring from the Boot Menu

Restoring in Gaia Clish

Support

Safety, Environmental, and Electronic Emissions Notices

Quantum Force 19000 and 29000 Appliances Getting Started Guide|7

Safety, Environmental, and

Electronic Emissions Notices

Read the following warnings before setting up or using the appliance.

Warning - Do not block air vents. A minimum 1/2-inch clearance is required.

Warning - Many components described in this document can be damaged by

Electrostatic Discharge (ESD). Follow the precautions described here and before

specific procedures detailed in the document to protect static-sensitive components

from ESD-related damage.

Safety, Environmental, and Electronic Emissions Notices

Quantum Force 19000 and 29000 Appliances Getting Started Guide|8

The machine can only be used in a restricted access location and must be installed and

maintained by a skilled person.

The device can only be used in a fixed location such as a lab or a machine/server room. When

you install the device, ensure that the protective earthing connection of the socket-outlet is

verified by a skilled person.

Before you install or remove a chassis, or work near power supplies, turn off the power and

unplug the power cord.

To prevent damage to any system board, it is important to handle it with care. The following

measures are generally sufficient to protect your equipment from static electricity discharge:

nThis equipment must be grounded.

nWhen handling the board, use a grounded wrist strap designed for static discharge

elimination.

nTouch a grounded metal object before removing the board from the antistatic bag.

nHandle the board by its edges only. Do not touch its components, peripheral chips,

memory modules or gold contacts.

nWhen handling memory modules, avoid touching the gold edge fingers.

nRestore the communications appliance system board and peripherals back into the

antistatic bag when they are not in use or not installed in the chassis. Some circuitry on

the system board can continue operating even though the power is switched off.

nDisconnect the system board power supply from its power source before you connect or

disconnect cables or install or remove any system board components. Failure to do this

can result in personnel injury or equipment damage.

nAvoid short-circuiting the lithium battery; this can cause it to superheat and cause burns

if touched.

nClass 1 laser product warning - A totally enclosed laser system containing a class 1

laser.

nProduct shall be used with Class 1 laser device modules.

This device is not intended for use in the direct field of view at visual display workplaces. To

avoid incommoding reflexions at visual display workplaces this device must not be placed in

the direct field of view.

Safety, Environmental, and Electronic Emissions Notices

Quantum Force 19000 and 29000 Appliances Getting Started Guide|9

Lithium Battery Caution

nThere is a risk of explosion if battery is replaced by an incorrect type.

nDispose of used batteries according to the manufacturer's instructions.

nInstallation only by a skilled person who knows all Installation and Device Specifications

which are to be applied.

nDo not carry the handle of power supplies when moving to another place.

nPlease conform to your local laws and regulations regarding safe disposal of lithium

battery.

nDisposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a

battery in an explosion.

nLeaving a battery in an extremely high temperature surrounding environment can result

in an explosion or the leakage of flammable liquid or gas.

nA battery subjected to extremely low air pressure that may result in an explosion or the

leakage of flammable liquid or gas.

Warning - DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.

REPLACE ONLY WITH SAME OR EQUIVALENT TYPE RECOMMENDED BY THE

MANUFACTURER. DISCARD USED BATTERIES ACCORDING TO THE

MANUFACTURER'S INSTRUCTIONS.

DONOTDISASSEMBLEITORATTEMPTTORECHARGEITOUTSIDETHESYSTEM.

Warning - Class I Equipment. This equipment must be earthed. The power plug must

be connected to a properly wired earth ground socket outlet. An improperly wired

socket outlet could place hazardous voltages on accessible metal parts.

Electrical Safety Instructions

Before turning on the device, ground the grounding cable of the equipment. Proper grounding

is very important to protect the equipment against the harmful effects of external noise and to

reduce the risk of electrocution in the event of a lightning strike. To uninstall the equipment,

disconnect the ground wire after turning off the power. A ground wire is required and the part

connecting the conductor must be greater than 6 AWG.

Safety, Environmental, and Electronic Emissions Notices

Quantum Force 19000 and 29000 Appliances Getting Started Guide|10

ITE Room Warning

Suitable for installation in Information Technology Rooms in accordance with Article 645 of the

National Electrical Code and NFPA 75.

Rack Mount Instructions

The following or similar rack-mount instructions are included with the installation instructions:

1. Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the

operating ambient temperature of the rack environment may be greater than room

ambient. Therefore, consideration should be given to installing the equipment in an

environment compatible with the maximum ambient temperature specified by the

manufacturer.

2. Reduced Air Flow - Installation of the equipment in a rack should be such that the

amount of air flow required for safe operation of the equipment is not compromised.

3. Mechanical Loading - Mounting of the equipment in the rack should be such that a

hazardous condition is not achieved due to uneven mechanical loading.

4. Circuit Overloading - Consideration should be given to the connection of the equipment

to the supply circuit and the effect that overloading of the circuits might have on over

current protection and supply wiring. Appropriate consideration of equipment nameplate

ratings should be used when addressing this concern.

5. Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained.

Particular attention should be given to supply connections other than direct connections

to the branch circuit (e.g. use of power strips).

For California:

Perchlorate Material - special handling may apply. See

http://www.dtsc.ca.gov/hazardouswaste/perchlorate

The foregoing notice is provided in accordance with California Code of Regulations Title 22,

Division 4.5, Chapter 33. Best Management Practices for Perchlorate Materials. This product,

part, or both may include a lithium manganese dioxide battery which contains a perchlorate

substance.

Proposition 65 Chemical

Chemicals identified by the State of California, pursuant to the requirements of the California

Safe Drinking Water and Toxic Enforcement Act of 1986, California Health & Safety Code s.

25249.5, et seq. ("Proposition 65"), that is "known to the State to cause cancer or reproductive

toxicity" (see http://www.calepa.ca.gov)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Checkpoint Netzwerk-Hardware Handbücher

Checkpoint

Checkpoint 12000 Bedienungsanleitung

Checkpoint

Checkpoint CPAC-Falcon-10G-B Bedienungsanleitung

Checkpoint

Checkpoint 1500 Series Bedienungsanleitung

Checkpoint

Checkpoint NGX R66 Bedienungsanleitung

Checkpoint

Checkpoint QUANTUM SMART-1 Bedienungsanleitung

Checkpoint

Checkpoint 6000 Series Bedienungsanleitung

Checkpoint

Checkpoint 600 Bedienungsanleitung

Checkpoint

Checkpoint QUANTUM SMART-1 6000-L/6000-XL Bedienungsanleitung

Checkpoint

Checkpoint UTM-1 Edge W16 Bedienungsanleitung

Checkpoint

Checkpoint 5000 Series Bedienungsanleitung

Checkpoint

Checkpoint 16000 Bedienungsanleitung

Checkpoint

Checkpoint QUANTUM SPARK 1530 Bedienungsanleitung

Checkpoint

Checkpoint MHO175 Bedienungsanleitung

Checkpoint

Checkpoint 6000 Series Bedienungsanleitung

Checkpoint

Checkpoint QUANTUM MAESTRO Bedienungsanleitung

Checkpoint

Checkpoint MHO170 Bedienungsanleitung

Checkpoint

Checkpoint TE250X Bedienungsanleitung

Checkpoint

Checkpoint Smart-1 5050 Bedienungsanleitung

Checkpoint

Checkpoint 5000 Series Bedienungsanleitung

Checkpoint

Checkpoint 21000 Appliances G-70 Bedienungsanleitung

Checkpoint

Checkpoint 770 Bedienungsanleitung

Checkpoint

Checkpoint 4200 Bedienungsanleitung

Checkpoint

Checkpoint UTM-1 U-5 Bedienungsanleitung

Checkpoint

Checkpoint IPS-1 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung