Child Craft CRIB'N'DOUBLE BED Bedienungsanleitung

CRIBRIB

RIBRIB

RIB''

'NN

N'D'D

'D'D

'DOUBLEOUBLE

OUBLEOUBLE

OUBLE BB

BEDED

EDED

CONVERTSONVERTS

ONVERTSONVERTS

ONVERTS

TOTO

TO DD

DAYBEDAYBED

AYBEDAYBED

AYBED

(1) Allen Wrench (6) K/D Bolt Plugs

(4) Hexhead Machine

Screws

(2)RHSlotted/Phillips

Machine Screws

(2) Allenhead K-D Bolts

(10) RH Phillips

Wood Screws

(4) FH Phillips Wood

Screws

(actual size)

(4) Hole

Button Covers

(2) Upper Tracks

(2) 4-Position Spring Brackets

(1) Lower Track Assembly

(Right)

(2) Rubber Washers

CCH02724:06/00

31061

CHILD CRAFT INDUSTRIES, INC.

P.O. Box 444, Salem, IN USA 47167-0444

PH:812-883-3111-FAX: 812-883-1819- http://www.childcraftind.com

ASSEMBLY DIRECTIONS AND PARTS LIST

ΦΦ

ΦREADALL INSTRUCTIONSWITH CAREBEFORE STARTINGTHE ASSEMBLY PROCEDURE.

ΦΦ

ΦYOU WILL NEED A PHILLIPS SCREWDRIVER, A STANDARD SLOTTED SCREWDRIVER, A 3/8” WRENCH

(or adjustable wrench), AND THE ENCLOSED ALLEN WRENCH A& A 10mm WRENCH.

child craft

PARTS ENCLOSED IN HARDWARE BAG

(

NOTED

WHEN

SHOWN

ACTUAL

SIZE

)

(actual size)

H(2) Allenhead K-D Bolts

(actual size)

(1) Lower Track Assembly

(Left)

PARTS ENCLOSED IN CARTON

(style may vary)

(1) Headboard

(1) Footboard

OP (1) Stationary Side

Q(1) Dropside

(1) Stretcher

U(1) Spring

plastic

pouch

Carefully remove and lay out all hardware and parts. Check quantities and match to Hardware Bags and Carton

Parts Lists. If a part is missing or broken contact your dealer or write to Child Craft, [email protected]

for replacement parts or instructional literature. Before making this contact identify your crib'n'double bed model

number.ModelIdentificationnumbersarestampedontheinsidefaceorbottomedgeofHeadboardOO

OorFootboard

P.Make note of all identification numbers and include this information with your request. DO NOT SUBSTITUTE

PARTS!

•Record your Crib/Daybed/Double Bed model identification number

forfuturereference:_____________________________.

(style may vary)

PREPARATION

(2) Allenhead K-D Bolts

(actual size)

CCH02724:06/002STEP1-DIAGRAM 1:INSTALLHARDWAREONFOOTBOARD ANDHEADBOARD

Align hardware with pre-drilled pilot holes and

attach (1) Upper Track KK

Kto the Headboard OO

and Footboard Pusing (2) FH Phillips Wood

Screws II

I. Attach (1) 4-Position BracketJus-

ing (3) RH Phillips Wood Screws FF

F. Next install

(1) Lower Track Assembly - Left MM

Musing (2)

RH Phillips Wood Screws FF

F to Headboard O.

Next install (1) Lower Track Assembly - Right

L using (2) RH Phillips Wood Screws FF

F to

Footboard P. Diagram illustrates hardware

installed on Footboard P. Insure the notch on

Lower Tracks L& Mfaces the inside of the

crib as illustrated.

pilot holespilot holes

pilot holes

STEP 2-DIAGRAM2:ATTACHHEADBOARD&FOOTBOARD TOSTATIONARY SIDE

NOTE: Attach Footboard P using the same

process as shown for the Headboard O.

Attach Headboard OO

Oto Stationary Side Assembly QQ

Qas shown in Diagrams . You will need (1) of

the Allenhead K-D Bolts GG

Gand (1) of the Allenhead K-D Bolts XX

X along with (2) of the K-D Bolt Plugs

E.Note:

Use the Allenhead Wrench

along with a slotted screwdriver.

Pull out the Allenhead K-

D Bolt GG

G& XX

Xjust enough to allow the K-D Bolt Plug EE

Eto be fully inserted in hole. Tighten until secure

but DO NOT OVERTIGHTEN. Follow this process when installing all K/D Bolt Plugs EE

Eand Allenhead

K-D Bolts GG

G& XX

CONNECTEDVIEW

Factory

installed J

Slotted

screwdriver

NOTE: Insert the Dowel on Ends of Stretcher Tinto this

receiving hole. Follow same process on Footboard PP

Dowel

Locate Crib Spring UU

Uwith (4) Tabs. Note: Be sure

smooth side of Crib SpringUU

Uwire is placed upward as

illustrated. Position the (4) Tabs attached to the ends of

Crib Spring UU

U,to mount to your selected position in the

4-Position Spring Brackets JJ

J which you mounted onto

the Headboard OO

O,Footboard PP

Pand were factory

mounted to Stationary Side Assembly QQ

Q. Select a

position and install a Hexhead Machine Screw DD

through each of the (4) Crib Spring Tabs and into a

receiving hole in each 4-Position Spring Bracket, then

tightensecurelywith a 10mmwrench. Whenyou decide

on another height position of Crib Spring UU

Uyou will need

to remove the (4) Hexhead Machine ScrewsDD

Dusing a

10mm wrench, and relocate to another of the four

positions. Check Hexhead Machine Screws DD

Dperiodi-

cally and tighten when needed. Also check all screws

and bolts periodically and tighten when needed.

CCH02724:06/00 3

STEP 3-DIAGRAM3:INSTALLSTRETCHER

Locate Stretcher TT

T, (2) K-D Bolt Plugs EE

Eand (2) Allenhead

K-D Bolts HH

H.Insert the dowel on the ends of the Stretcher

Tinto the receiving holes located on the inside face of the

bottom rail of Headboard OO

Oand Footboard PP

P. Insert an

Allenhead K-D Bolt HH

Hinto its receiving hole in the bottom rail.

Insert aK-D Bolt Plug EE

Eintotheholenearthe endof Stretcher

T. Pull out each Allenhead K-D Bolt HH

Hjust enough to allow

the K-D Bolt Plug EE

Eto be fully inserted in the hole. Tighten

Allenhead K-D Bolts at each end of Stretcher TT

Tuntil secure

using Allen Wrench AA

(enclosed)

, while securing K-D Bolt

Plug EE

Ewith a standard slotted screwdriver, Note: this is the

same process you just performed in Step 2. CAUTION: DO

NOT OVERTIGHTEN K-D BOLTS HH

STEP 4-DIAGRAM 4:INSTALL CRIB SPRING

Tab

Highest position

Lowest position

Corner post of O, Por Q.

STEP5-DIAGRAM 5:INSTALL DROPSIDE

NOTE: Mount all 4 “Tabs” on

Crib Spring UU

Uat the same

vertical mattress position.

Align Plastic Guides

(Factory installed) on

Dropside Rwith

dropside hardware

mountedon postfrom

underneath. An as-

sistant is very help-

ful. Afterallfour plas-

tic guides are aligned

with the hardware,

liftDropside“UP” and

allow it to latch into

the raised position.

After Dropside R is

installed on the

tracks and is latched

in the “UP” position,

insert a Machine

Screw Cinto a Rub-

ber Washer Band

thread into hole in

bottom of Lower

Track Assemblies L

& M.

Align all four plastic guides with installed

tracks from underneath - then lift “UP” until

Lower Plastic Guides Latch.

Align Upper

PlasticGuide

with Upper

Track K

Align Lower

PlasticGuide

with Lower

Track L

ALWAYS BESURECRIB SIDEIS“UP” AND“LATCHED”

BEFORELEAVINGCHILDINCRIB.

LockingMechanism

TO LOWER DROPSIDE RR

R: FIRST

- LIFT THE DROPSIDE, SECOND -

WITH KNEE PUSH IN ON CEN-

TER OF BOTTOM RAIL OF

DROPSIDE TO RELEASE LATCH

ON LOWER PLASTIC LATCH.

LOWER DROPSIDE BY HAND. TO

RAISE DROPSIDE RR

R: PULL “UP”

UNTIL LOWER PLASTIC GUIDES

LATCH IN SLOT IN LOWER

TRACKS

L& MM

NOTE:

It may be necessary to

Flex the Locking Mechanism

toward outside of crib to engage

the Lower Tracks

4CCH02724:06/00

DIRECTIONS FOR CONVERTING

“CRIB”TO A“DAYBED”DIRECTIONS FOR CONVERSION

TO A“FULL SIZE HEADBOARD”

When use as a crib has been completed, you have the option to

convert to a daybed for years of additional use in your child’s room.

Refer to Step 5 - Diagram 5 and follow direction is reverse order.

Store the removed parts and hardware in the event you wish to

convert your daybed back to a crib. Refer to Sketch A.

Sketch A

(style may vary)

Disassemble crib by performing Steps 5, 4, 3 & 2 in reverse order

to remove the Stationary Side QQ

Qfrom the other crib parts.Attach

the Stationary Side to a Hollywood style full size bed frame at the

location of the mounting cleats (Hardware is not provided). See

Diagram 6 and Sketch B. Insert the Hole Button Covers Nas

shown.

Sketch B

(style may vary)

Purchased Mattress

(See size requirements on

page 5 under CAUTION)WHENEVERDISASSEMBLING CRIBDO

NOT REMOVE ANY ITEM ATTACHED

WITH WOOD SCREWS FF

F OR II

DIAGRAM 6

Receiving holes for Hole Button Covers N

(style may vary)

MountingCleats

(Cleats are flush with the face that the

purchased Hollywood Frame mounts to.)

Assembled Crib

(style may vary)

MAINTENANCEOF YOURCHILD CRAFTCRIB/DAYBED/FULL SIZE HEADBOARD: Uponcompletion ofassembly besure

allscrews, boltsandfastening deviceshave beentightened securely. Afrequentcheckshould bemade ofallscrews, boltsand

fastening devices and tightened if needed. Before each usage or assembly, inspect crib for damaged hardware, loose joints,

missing parts or sharp edges. DO NOT use crib if parts are missing or broken. Contact your Dealer or Child Craft (812) 883-

3111,[email protected]for areplacement partor instructionalliterature ifneeded. Include ModelIdentification Number

withyourrequest which you recorded onpage1 of these instructions. DO NOT SUBSTITUTE PARTS. DO NOT MAKE ANY

ALTERATIONSNOT DESCRIBEDINTHESE ASSEMBLYDIRECTIONS.

CLEANING INSTRUCTIONS FOR YOUR CHILD CRAFT CRIB/DAYBED/FULL SIZE HEADBOARD: Mix together a mild

solutionof gentledishwashingliquid andwater,apply tosurfaceusing asoft cleanclothlightly dampenedinthe solution. Rinse

with clear water again using a soft clean cloth, then dry all surfaces thoroughly with a soft dry cloth. NO ABRASIVE CLEAN-

ERS, SCOURING PADS, STEEL WOOL, OR COARSE RAGS SHOULD BE USED TO CLEAN THIS FINE FURNITURE.

STORAGEANDUSEOF YOURCHILDCRAFT CRIB/DAYBED/FULLSIZEHEADBOARD: Aprintedplasticpouchisattached

tothe cribspringforthepermanent storageof theassembly directions. Aftercompletingtheassemblyprocess youare advised

toread andbeawareofallWARNINGS,CAUTIONS, CLEANING,STORAGE,USEAND MAINTENANCEnoticescontained in

thissetof directions andprintedon the plastic pouchlocated on the underneathsideof the cribspring. Youwill then placethe

complete set of assembly directions into the plastic pouch for future referral. We caution you not to place excess hardware in

the plastic pouch asit could present danger toa child if retrieved. When storing crib use CAUTIONasextreme temperature or

humiditychanges couldbe harmful. Use CAUTIONwhen avaporizer isin use,alwaysaimvaporstream awayfrom cribas well

asawayfrom any woodfurnitureitem.

WARNING

ΦΦ

ΦFAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY IN-

STRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

ΦΦ

ΦREAD ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP

INSTRUCTIONS FOR FUTURE USE. A PLASTIC POUCH IS ATTACHED TO

CRIBSPRINGFORPERMANENTSTORAGEOFTHEINSTRUCTIONALLITERATURE.

ΦΦ

ΦBEFORE EACH USAGE OR ASSEMBLY, INSPECT CRIB FOR

DAMAGED HARDWARE, LOOSE JOINTS, MISSING PARTS OR

SHARP EDGES. DO NOT USE CRIB IF ANY PARTS ARE MISSING

OR BROKEN. ASK YOUR DEALER OR WRITE TO CHILD CRAFT,

P.O. BOX 444, SALEM, IN 47167-0444 USA 812-883-3111 FOR RE-

PLACEMENT PARTS AND INSTRUCTIONAL LITERATURE IF

NEEDED. INCLUDEMODELIDENTIFICATIONNUMBERSWITH YOUR REQUESTWHICH

YOU RECORDED ON PAGE TWO. DO NOT SUBSTITUTE PARTS.

ΦΦ

ΦAFTER RAISING SIDE, MAKE SURE LATCHES ARE SECURE.

ΦΦ

ΦWHEN CHILD IS ABLE TO CLIMB OUT OR REACHES THE

HEIGHT OF 35 INCHES (90 CENTIMETERS) THE CRIB SHALL NO

LONGER BE USED.

ΦΦ

ΦDO NOT PLACE CRIB NEAR WINDOW WHERE CORDS FROM

BLINDS OR DRAPES MAY STRANGLE A CHILD.

ΦΦ

ΦIF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR

CHILDREN’S PRODUCTS.

ΦΦ

ΦDO NOT LEAVE CHILD IN CRIB WITH SIDE LOWERED. BE SURE

SIDE IS IN RAISED AND LOCKED POSITION WHENEVER CHILD

IS IN CRIB.

ΦΦ

ΦWHEN CHILD IS ABLE TO PULL TO STANDING POSITION, SET

MATTRESS TO LOWEST POSITION AND REMOVE BUMPER PADS,

LARGE TOYS AND OTHER OBJECTS THAT COULD SERVE AS

STEPS FOR CLIMBING OUT.

ΦΦ

ΦNEVER USE PLASTIC SHIPPING BAGS OR OTHER PLASTIC

FILM AS MATTRESS COVERS BECAUSE THEY CAN CAUSE SUF-

FOCATION.

ΦΦ

ΦDO NOT USE A WATER MATTRESS WITH THIS CRIB.

ΦΦ

ΦREPLACE TEETHING RAIL(S) IF DAMAGED OR LOOSE. (IF

EQUIPPED WITH TEETHING RAILS.)

ΦΦ

ΦSTRINGS CAN CAUSE STRANGULATION! DO NOT PLACE

ITEMS WITH A STRING AROUND A CHILD’S NECK, SUCH AS

HOOD STRINGS OR PACIFIER CORDS. DO NOT SUSPEND

STRINGS OVER A CRIB OR ATTACH STRINGS TO TOYS.

ΦΦ

ΦREMOVE ALL CRIB TOYS WHICH ARE STRUNG ACROSS CRIB

AREA WHEN YOUR CHILD IS BEGINNING TO PUSH UP ON HANDS

AND KNEES OR IS 5 MONTHS OF AGE, WHICHEVER OCCURS

EARLIEST. THESE TOYS CAN CAUSE STRANGULATION.

ΦΦ

ΦWHENDISASSEMBLING THISCRIB, DO NOTREMOVE ANYITEM

ATTACHED WITH WOOD SCREWS.

ΦΦ

ΦALWAYS ENSURE A SAFE ENVIRONMENT FOR THE CHILD BY

CHECKING REGULARLY, BEFORE PLACING THE CHILD IN THE

CRIB, THAT EVERY COMPONENT IS PROPERLY AND SECURELY

IN PLACE.

CCH02724:06/00 CAUTION

ΦΦ

ΦANY MATTRESS USED IN

THIS CRIB MUST BE AT

LEAST 27-1/4 INCHES (69

CENTIMETERS), BY 51-5/8

INCHES (131 CENTIME-

TERS), WITH A THICKNESS

NOT EXCEEDING 6 INCHES

(15 CENTIMETERS). THE

DIMENTIONS OF THE MATTRESS

SHALL BE TAKEN FROM SEAM TO

SEAMOREDGETOEDGEWHEREAP-

PROPRIATE.

ΦΦ

ΦUPON COMPLETION OF

ASSEMBLY BE SURE ALL

SCREWS, BOLTS AND FAS-

TENING DEVICES HAVE

BEEN TIGHTENED SE-

CURELY. A FREQUENT

CHECK SHOULD BE MADE

OF ALL SCREWS, BOLTS

AND FASTENING DEVICES

AND TIGHTEN IF NEEDED.

CCH02724:06/00

JCHE.p65

CHILD CRAFT

INDUSTRIES, INC.

P.O. BOX 444

SALEM,IN47167-0444 USA

PH:812-883-3111

FAX:812-883-1819

http://www.childcraftind.com

MADE IN croatia

English

▲

Andere Child Craft Baby- und Kleinkindmöbel Handbücher

Child Craft

Child Craft SINGLE DROPSIDE CRIB Bedienungsanleitung

Child Craft

Child Craft Jordyn F05432 Bedienungsanleitung

Child Craft

Child Craft Soho Flat Top Convertible Crib F33901 Bedienungsanleitung

Child Craft

Child Craft Elin F07116 Bedienungsanleitung

Child Craft

Child Craft FOREVER ECLECTIC HAMPTON Arch-Top Crib Bedienungsanleitung

Child Craft

Child Craft Surrey Hill F37001 Bedienungsanleitung

Child Craft

Child Craft Long Beach F22101 Bedienungsanleitung

Child Craft

Child Craft Legacy Crib Bedienungsanleitung

Child Craft

Child Craft Crib'n'Double Bed 34801 Firmware-Update

Child Craft

Child Craft CRIB'N'DOUBLE BED Bedienungsanleitung

Child Craft

Child Craft Forever Eclectic F49101 Bedienungsanleitung

Child Craft

Child Craft Delaney F31601 Bedienungsanleitung

Child Craft

Child Craft F01216 Bedienungsanleitung

Child Craft

Child Craft Kieran F13201 Bedienungsanleitung

Child Craft

Child Craft F32401 Bedienungsanleitung

Child Craft

Child Craft Stella F32201 Bedienungsanleitung

Child Craft

Child Craft Wadsworth 31301 Bedienungsanleitung

Child Craft

Child Craft F33601 Bedienungsanleitung

Child Craft

Child Craft 1216 Bedienungsanleitung

Child Craft

Child Craft DOUBLE DROPSIDE CRIB Bedienungsanleitung

Child Craft

Child Craft DOUBLE DROPSIDE CRIB Bedienungsanleitung

Child Craft

Child Craft Delaney F01616 Bedienungsanleitung

Child Craft

Child Craft FOREVER Eclectic Hampton F39011 Bedienungsanleitung

Child Craft

Child Craft Kieran F33201 Bedienungsanleitung

Beliebte Baby- und Kleinkindmöbel Handbücher anderer Marken

Mocka

Mocka Learning Tower Bedienungsanleitung

VERTBAUDET

VERTBAUDET 62003-2789 Bedienungsanleitung

Summer

Summer MY FUN POTTY Bedienungsanleitung

Grotime

Grotime Changeover Bedienungsanleitung

Fillikid

Fillikid 1221 Bedienungsanleitung

Relita

Relita loft bed ALEX Bedienungsanleitung

Joovy

Joovy Qool Bedienungsanleitung

KidKraft

KidKraft Step n Store Bedienungsanleitung

Fisher-Price

Fisher-Price L4889 Bedienungsanleitung

Germania

Germania Moon 4048.101 Bedienungsanleitung

BabyGo

BabyGo Amila Bedienungsanleitung

Fisher-Price

Fisher-Price CBV06 Bedienungsanleitung

Fisher-Price

Fisher-Price H4790 Bedienungsanleitung

Graco

Graco Dream Suite Bedienungsanleitung

Delta Childrens Products

Delta Childrens Products BB87116CR Bedienungsanleitung

Costway

Costway BB5591 Bedienungsanleitung

SAUTHON

SAUTHON UP CHENE DORE UI101A Bedienungsanleitung

Delta Children

Delta Children Classic Bedienungsanleitung