Child Craft F32401 Bedienungsanleitung

AB20073E

AB20072_G1

SINCE 1954

Assembled as Crib

AB20072_G2

Assembled as Toddler Bed

Foundations®Worldwide, Inc.

5216 Portside Dr., Medina Oh, 44256 USA • PH: 1 330.722.5033 • FAX: 1 330.722.5037

www.foundations.com

Bradford Full Size Traditional Wood Crib

ASSEMBLY ASSISTANCE

IMPORTANT: retain for future reference read

carefully.

Foundations®strives for the highest quality in our

products but occasionally a missing part or problem

can occur during assembly.

If any parts are missing or broken or you need

assistance with assembly, DO NOT return the

product to your dealer. Go to our website at

www.foundations.com or call Foundations®

for assistance at 1-877-716-2757 (U.S. Only) or

1-330-722-5033 (Monday through Friday, 9:00

a.m.– 4:00 p.m. Eastern Time). Please have the

model number and manufacture date available

when you call or write us at:

Foundations®, 5216 Portside Dr. Medina Oh. 44256

KEEP INSTRUCTIONS FOR FUTURE USE

FOR CUSTOMER SERVICE CALL

1-877-716-2757

(outside of U.S. 330-722-5033). DO NOT CALL

RETAILER OR RESELLER FOR SERVICE

AS THEY ARE NOT AUTHORIZED TO

RESOLVE ANY SERVICE ISSUES.

FOR FEDERAL SAFETY STANDARD

COMPLIANCE CERTIFICATES, PLEASE VISIT

OUR WEBSITE AT

www.foundations.com

Record the information for your product here:

Model number:

Manufacture date:

PO number:

Models Covered: F32401

• Adult assembly required.

• Read all instructions BEFORE assembly and USE

of product.

• Unpack carton, remove packing materials,

including poly bag. Identify and check all parts.

ASSEMBLY INSTRUCTIONS

THIS IS THE ASSEMBLY INSTRUCTIONS FOR CRIBS SOLD IN CANADA

INSTRUCTIONS D’ASSEMBLAGE POUR LES LITS DE BÉBÉ VENDUS AU CANADA

Hardware Package

AB20072_G4

Crib Parts

SUGGESTED TOOLS

#2 Medium Straight Screwdriver

AB20072_G3

CDEF

GHI

PARTS LIST

PREPARATION

Carefully remove and lay out all hardware and parts.

Check quantities and match the parts list.

Construct Crib on an even at oor.

Note: during the assembly process whenever

using screws or bolts, Check each with the parts list

by letter and size identication. Place each screw

or bolt on the diagram of the item which is sketched

actual size. Be sure to use the proper size specied

in the assembly directions. If any parts are missing

or broken or you need assistance with assembly.

DO NOT return your product to the dealer.

Please identify the crib by the model number

identication stamped on the inside face of the

Short Head Assembly or Short Foot Assembly when

you call or write to Foundations®. Make note of all

identification numbers and include this information

with your request.

The Allen Head Bolts (Q) have a friction enhancing

patch on the thread which may cause resistance

during tightening.

DO NOT Substitute Parts!

A. Stationary Side Assembly

B. Long Foot Assembly

C. Short Head Assembly

D. Short Foot Assembly

E. Head Post - Right

F. Head Post - Left

G. Foot Post - Left

H. Foot Post - Right

I. Stretcher

J. Post cap - Left

K. Post cap - Right

L. Guard Rail Extender

M. Spring

N. Allen Head Bolt 6mm x 90mm

O. Allen Head Bolt 6mm x 60mm

P. Allen Head Bolt 6mm x 45mm

Q. Allen Head Bolt 6mm x 14mm

R. Connector Nut

S. Joint Connector Nut

T. Dowel Pin 8mm x 30mm

V. Allen Wrench

Part Description Part Number Quantity

22301218

22301211

22301228

22301229

22301216

22301214

22301204

22301206

22301235

22301233

22301234

22300316

11200405

11200416

11200326

11200373

11200328

11200331

11200330

11200359

11200070

Figure 1

STEP 1

AB20072_G5

STEP 2

Figure 2

AB20072_G6

Construct Short Foot and Head assembly:

Short Head Assembly:

Insert Allen Head Bolts (Q) and Connector Nuts (R)

into holes in Head Post -Left (F) as shown to ll in

unused Holes.

Insert Allen Head Bolt (P) and Connector Nut (R)

into hole in Foot Post -Left (G) as shown to ll in

unused Holes. Tighten Bolts with Allen Wrench.

Align Head Post -Left (F) with Short Head Assembly

(C). Insert Allen Bolts (P) and Snug Bolts with Allen

Wrench.

Align Foot Post - Left (G) with Short Head Assembly

(C). Insert Allen Bolts (P) and Snug Bolts and Nuts

with Allen Wrench.

Tighten all Nuts and Bolts securely.

See gure 1.

Repeat the above procedure with Short Foot

Assembly (D) Head Post - Right (E) and Foot Post -

Right (H).

Stationary Side Assembly to Short Head Assembly:

Place Joint Connector Nuts (S) into holes in the

back of top rail and bottom of bottom rail of

Stationary Side Assembly (A). Align Head Post - Left

(F) with Stationary Side Assembly (A). Insert Allen

Head Bolts (N) into Head Post - Left (F) and Rotate

Joint Connectors Nuts to align threads with bolts

and snug with Allen wrench .

Tighten all Nuts and Bolts securely.

See gure 2

Figure 3

STEP 3

AB20069_G7

STEP 4

Figure 4

AB20072_G8

Stationary Side Assembly to Short Foot Assembly:

Place Joint Connector Nuts (S) into holes in the

back of top rail and bottom of bottom rail of

Stationary Side Assembly (A). Align Head Post -

Right (E) with Stationary Side Assembly (A). Insert

Allen Head Bolts (N) into Head Post - Left (E) and

Rotate Joint Connectors Nuts to align threads with

bolts and snug with Allen wrench .

Tighten all Nuts and Bolts securely.

See gure 3.

Assemble Stretcher to crib.

Insert Joint Connector Nuts (S) into Stretcher (I) .

Align and insert dowels on end of stretcher into

holes in Foot Posts (H) and (G).

Insert Allen Head Bolts (N) into Foot Posts

(H) and (G) . Rotate Joint Connectors Nuts to align

threads with bolts and loosely tighten with Allen

wrench.

Tighten all Nuts and Bolts securely.

See gure 4.

Figure 5

STEP 5

Add Mattress Spring to crib.

There are 2 positions for the Spring (M) shown as

(1) and (2). The position must be the same as for all

the brackets attached to the crib.

Note: Pouches containing warnings and instructions

face up on top surface of Spring.

Position tabs on Spring at approximately a 45

degree angle. The Spring (M) is lowered into the

crib. Take care not to scratch the wood with the

metal Spring. Align the Spring Brackets with the

holes in the crib at the desired height. Insert

Allen Bolt (Q) into hole in spring brackets from

inside of crib then through correct height hole in the

crib together with Connector Nut (R). Insert

Connector Nuts (R) and Allen Head bolts (Q) into

unused Holes.

Tighten all bolts securely with Allen Wrenches.

To Adjust height of Spring (M) remove Nuts and

Bolts. Then relocate Spring (M) to new height

adjustment level and install Nuts and Bolts as

described in previous paragraph.

See gure 5.

AB20072_G9

AB20072_G10

Figure 6

STEP 6

Construct Long Foot Assembly to crib:

Align Long Foot Assembly (B) between Foot Posts

(G) and (H) and Dowels in Long Foot Assembly with

Holes in Foot Posts. Insert Joint Connector Nuts (S)

into Long Foot Assembly rails. Insert Allen Bolts (N)

through Foot Posts. Rotate Joint

Connectors Nuts to align threads with Bolts and

snug with Allen wrench .

Tighten all Nuts and Bolts securely.

See gure 6

Toddler Bed

Figure 7

AB20072_G12

Toddler bed conversion:

Follow assembly instructions up to and including

installation of Stretcher (I) shown in Step 4.

Spring (M) should be assembled and installed in the

lowest position as shown in Step 5.

If the Long Foot Assembly (B) is in place it must

be removed. Save the hardware and Assembly for

future possible use.

Holes remaining from the Removal of the Long Foot

Assembly (B) must be lled with Connector Nuts (R)

and Allen Bolts (P) to prevent nger entrapment.

Insert Dowel Pins (T) into top of Foot Posts (G) and

(H). Align Post Cap - Left (J) onto Foot Post - left

(G) and press onto Dowel Pins. Insert Allen Head

Bolt (P) ithrough Post cap into Foot post and tighten.

Repeat above procedure with Post cap - Right (K)

onto Foot Post (H).

See gure 7.

Finishing Touches

Place a purchased full sized mattress on the spring.

After completing the crib assembly, and after

making yourself aware of WARNINGS, CAUTIONS,

CLEANING,STORAGE,USE and MAINTENANCE

of crib on pages 9 and 10, store the assembly

directions in the pouch which was pre-attached to

the spring. For future referral to assembly directions

you will only need to remove them from the pouch.

We caution you not to store excess hardware in

pouch as this would be a danger to child if retrieved

by him/her.

AB20072_G11

WARNING

WARNING:INFANTS HAVE DIED IN TODDLER BEDS FROM

ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a

small child. NEVER use bed with children younger than 15 months. ALWAYS follow

assembly instructions.

WARNING:STRANGULATION HAZARD: NEVER place bed near windows

where cords from blinds or drapes may strangle a child. NEVER suspend strings

over bed. NEVER place items with a string, cord or ribbon, such as hood strings or

pacifier cords, around a child’s neck. These items may catch on bed parts.

CAUTION:ENTRAPMENT HAZARD: To avoid dangerous gaps, any

mattress used in this bed shall be a full-sized crib mattress at least 51 5/8 in. (1310

mm) in length, 27 1/4 in. (690 mm) in width, and 4 in. (100 mm) in thickness.

• The users maximum weight shall not be greater than 50 lbs. (22.7 kg).

• Mattress MUST be moved into lowest position for proper positioning.

• This crib contains all components necessary to convert to a toddler bed. However,

a guardrail may be available for purchase to provide additional security. Contact

Foundations® for assistance. Refer to maintenance section for contact

information.

WARNING

WARNINGS (For Toddler Bed)

Guard Rail Option and Installation

For added security, a guard rail can be purchased for

this crib. Contact Foundations® or your dealer.

Follow the directions supplied with the purchased

Guard Rail.

Note: 4 of the Allen Head Bolts (N) and (2) Guard

Rail extenders(L) will be needed to attach the Guard

Rail.

Guard Rail extenders (L) must be installed between

Guard Rail and Foot Posts (G) and (H) for this crib.

If the Long Foot Assembly (B) and Stretcher (I) is in

place it must be removed. Save the hardware and

assemblies for future possible use.

Holes remaining from the Removal of the Long Foot

Assembly and Stretcher must be lled with

Connector Nuts (R) and Allen Bolts (P) after Guard

Rail is installed to prevent nger entrapment.

Note:Keep All parts and these instructions for Further

use and reference. General guard rail instructions

will be included in the guard rail kit.

Post Caps (J) and (K) must be installed using the

Toddler Bed conversion instruction.

See gure 8.

AB20072_G13

Figure 8

Maintenance Cleaning and Storage

MAINTENANCE:

Upon completion of the assembly, check to make sure all screws, bolts and connectors are tightened and

secure.

Periodically check crib for damaged hardware, loose joints, missing parts or sharp edges before and after

assembly and frequently during use.

DO NOT use crib if any parts are missing or broken.

If any parts are missing, broken or you need Assistance DO NOT return crib to your dealer.

Call Foundations® at 330.722.5033 and include model identication numbers recorded on page 1.

DO NOT substitute parts.

CLEANING:

Mix a mild solution of gentle dishwashing soap and water, apply to surface using a clean cloth lightly

dampened in the solution. Rinse well with clear water using a soft clean cloth, then dry all surfaces with a

soft dry cloth.

DO NOT use abrasive cleaners or any cleaners with harsh chemicals that would contact a child’s

skin, scouring pads, steel wool or coarse rags. This crib should be treated the same as any ne

furniture.

STORAGE:

When storing crib use Caution as extreme temperature or humidity changes could be harmful.

Use caution when a vaporizer is in use. Always aim vapor stream away from crib as well as away

from any wood furniture item.

After completing the assembly the user is advised to read and be aware of

ALL WARNINGS, CAUTIONS, CLEANING, STORAGE USE AND MAINTENANCE notices in these

directions and printed on the storage pouch on the crib spring. A printed pouch is attached to the

crib spring for the permanent storage of the assembly directions. Please place the complete set of

assembly directions into the pouch for future referral. We caution the user to not place excess

hardware in the pouches as it could present danger to the child if retrieved.

CAUTION

• UPON COMPLETION OF ASSEMBLY BE SURE ALL SCREWS, BOLTS AND

FASTENING DEVICES HAVE BEEN TIGHTENED SECURELY. A FREQUENT CHECK

SHOULD BE MADE OF ALL SCREWS, BOLTS AND FASTENING DEVICES AND

TIGHTEN IF NEEDED.

Meets CPSC

Safety Requirements

SINCE 1954

5216 Portside Dr.

Medina Ohio 44256 USA

Telephone: 330.722.5033

Fax: 330.722.5037

www.child-craft.com

www.foundations.com

WARNING

• DO NOT use this crib if you cannot exactly follow the accompanying instructions.

• DO NOT use this crib for a child who can climb out of it or who is taller than 90 cm.

• DO NOT place in or near this crib any cord, strap or similar item that could become

wrapped around a child’s neck.

•DO NOT place this crib near a window or a patio door where a child could reach the

cord of a blind or curtain and be strangled.

• Ensure that the sides of the crib are properly latched or locked in the appropriate

position when a child is left unattended in it.

• Check this crib regularly before using it and do not use it if any parts are loose or

missing or if there are any signs of damage. Do Not substitute parts. Contact the

manufacturer if replacement parts or additional instructions are needed.

• Use a crib mattress that is no thicker than 15 cm thick and is of such a size that,

when it is pushed firmly against any side of the crib, it does not leave a gap of

more than 3 cm between the mattress and any part of the sides of the crib.

• Children can suffocate on soft bedding. Do Not place pillows, comforters or soft

mattresses in this crib.

Full Size Bed Conguration

Figure 9

AB20072_G14

Full Size Bed conversion:

The crib can be converted to a full size bed with the

purchase of a bed rail and slat kit from

Foundations®.

Use Allen Bolts (O) from existing hardware and

re-use the Joint Connectors (R).

Remove and save the Short Foot Assembly (C) and

Short Head Assembly (D) for future use.

For further Full size bed conguration refer to

instructions with the bed rails and slats.

See gure 9.

SINCE 1954

Bradford Full Size Wood Crib

Modèles couverts : F32401

THIS IS THE ASSEMBLY INSTRUCTIONS FOR CRIBS SOLD IN CANADA

INSTRUCTIONS D’ASSEMBLAGE POUR LES LITS DE BÉBÉ VENDUS AU CANADA

Foundations®Worldwide, Inc.

5216 Portside Dr., Medina, Oh 44256 É-U • Téléphone: 1 330.722.5033 • Télécopieur: 1 330.722.5037

www.foundations.com

CONSERVEZ CES INSTRUCTIONS À TITRE DE RÉFÉRENCE.

POUR LE SERVICE À LA CLIENTÈLE, APPELEZ LE 1-877-

716-2757

(à l’extérieur des É-U, appelez le 1-330-722-5033).

N’APPELEZ PAS LE VENDEUR OU LE DISTRIBUTEUR

POUR LE SERVICE À LA CLIENTÈLE, CAR ILS NE SONT

PAS AUTORISÉS À RÉSOUDRE CE

GENRE DE PROBLÈMES.

POUR OBTENIR DES CERTIFICATS DE CONFORMITÉ

AUX NORMES DE SÉCURITÉ FÉDÉRALES, VEUILLEZ

VISITER NOTRE SITE WEB AU

www.foundations.com

GUIDE D’ASSEMBLAGE

IMPORTANT: conserver pour consultation

future - lire attentivement.

Foundations® met tout en œuvre pour fabriquer

des produits de la plus haute qualité. Néanmoins,

malgré tous nos efforts, il arrive parfois qu’une

pièce manque ou qu’une difculté se présente

pendant l’assemblage. Si une pièce est manquante

ou brisée, ou si vous avez besoin d’aide pour as-

sembler le produit, NE retournez PAS le produit au

détaillant. Visitez notre site Web au www.founda-

tions.com ou demandez de l’aide à Foundations®

en composant le 1-877-716-2757 (É.-U. seulement)

ou le 1-330-722-5033 (du lundi au vendredi, de 9

h 00 à 16 h 00, heure de l’Est). Assurez-vous de

disposer du numéro de modèle et de la date de

fabrication du produit lorsque vous nous appelez ou

nous écrivez au :

Foundations®, 5216 Portside Dr. Medina, OH.

44256

• L’assemblage doit être effectué par un adulte.

• Veuillez lire toutes les instructions AVANT de

commencer l’assemblage et l’utilisation du produit.

• Déballez le produit et enlevez les matériaux

d’emballage, y compris le sac en polyéthylène.

Identiez et vériez toutes les pièces.

INSTRUCTIONS D’ASSEMBLAGE

Assemblé en lit de bébé

Assemblé en lit d’enfant.

Inscrivez les renseignements de votre

produit ici :

Numéro de modèle :

Date de fabrication :

No de commande :

AB20072_G1

AB20072_G2

Inhaltsverzeichnis

Sprachen:

Andere Child Craft Baby- und Kleinkindmöbel Handbücher

Child Craft

Child Craft Tremont F44501 Bedienungsanleitung

Child Craft

Child Craft SINGLE DROPSIDE CRIB Bedienungsanleitung

Child Craft

Child Craft LEGACY SINGLE DROPSIDE CRIB WITH DRAWER Bedienungsanleitung

Child Craft

Child Craft Parisian Full Size Wood Crib F12301 Bedienungsanleitung

Child Craft

Child Craft Delaney F01616 Bedienungsanleitung

Child Craft

Child Craft Kieran F33201 Bedienungsanleitung

Child Craft

Child Craft Delaney F31601 Bedienungsanleitung

Child Craft

Child Craft F21401 Bedienungsanleitung

Child Craft

Child Craft Orbit Euro F10201 Bedienungsanleitung

Child Craft

Child Craft Jordyn Euro F35404 Bedienungsanleitung

Child Craft

Child Craft Surrey Hill F37001 Bedienungsanleitung

Child Craft

Child Craft Penelope F36901 Bedienungsanleitung

Child Craft

Child Craft CRIB'N'DOUBLE BED Bedienungsanleitung

Child Craft

Child Craft Crib'n'Double Bed 34801 Firmware-Update

Child Craft

Child Craft Kieran F13201 Bedienungsanleitung

Child Craft

Child Craft Denman F33601 Bedienungsanleitung

Child Craft

Child Craft DOUBLE DROPSIDE CRIB Bedienungsanleitung

Child Craft

Child Craft Soho F34001 Bedienungsanleitung

Child Craft

Child Craft 15061 Bedienungsanleitung

Child Craft

Child Craft Elin F07116 Bedienungsanleitung

Child Craft

Child Craft CRIB'N'DOUBLE BED Bedienungsanleitung

Child Craft

Child Craft Westgate F38201 Bedienungsanleitung

Child Craft

Child Craft CONVERTS TO TODDLER BED AND FULL SIZE HEADBOARD AND... Bedienungsanleitung

Child Craft

Child Craft Legacy Crib Bedienungsanleitung

Beliebte Baby- und Kleinkindmöbel Handbücher anderer Marken

Mocka

Mocka Learning Tower Bedienungsanleitung

VERTBAUDET

VERTBAUDET 62003-2789 Bedienungsanleitung

Summer

Summer MY FUN POTTY Bedienungsanleitung

Grotime

Grotime Changeover Bedienungsanleitung

Fillikid

Fillikid 1221 Bedienungsanleitung

Relita

Relita loft bed ALEX Bedienungsanleitung

Joovy

Joovy Qool Bedienungsanleitung

KidKraft

KidKraft Step n Store Bedienungsanleitung

Fisher-Price

Fisher-Price L4889 Bedienungsanleitung

Germania

Germania Moon 4048.101 Bedienungsanleitung

BabyGo

BabyGo Amila Bedienungsanleitung

Fisher-Price

Fisher-Price CBV06 Bedienungsanleitung

Fisher-Price

Fisher-Price H4790 Bedienungsanleitung

Graco

Graco Dream Suite Bedienungsanleitung

Delta Childrens Products

Delta Childrens Products BB87116CR Bedienungsanleitung

Costway

Costway BB5591 Bedienungsanleitung

SAUTHON

SAUTHON UP CHENE DORE UI101A Bedienungsanleitung

Delta Children

Delta Children Classic Bedienungsanleitung