Child Craft Folding Mini Wood Crib F61301 Bedienungsanleitung

AB20046G

AB20046_G1

Foundations®Worldwide, Inc.

5216 Portside Dr, Medina Oh 44256 USA • PH: 1 330.722.5033 • FAX: 1 330.722.5037

www.childcraftbaby.com

Folding Mini Wood Crib

ASSEMBLY ASSISTANCE

IMPORTANT: retain for future reference read

carefully.

Foundations®strives for the highest quality in our

products but occasionally a missing part or problem

can occur during assembly.

If any parts are missing or broken or you need

assistance with assembly, DO NOT return the

product to your dealer. Go to our website at

www.childcraftbaby.com or Call Foundations®

for assistance at 1-877-716-2757 (U.S. Only) or

1-330-722-5033 (Monday through Friday, 9:00

a.m.– 4:00 p.m. Eastern Time). Please have the

model number and manufacture date available

when you call or write us at:

Foundations®, 5216 Portside Dr. Medina Oh. 44256

Read all instructions BEFORE assembly and USE of product.

KEEP INSTRUCTIONS FOR FUTURE USE

FOR CUSTOMER SERVICE CALL

1-877-716-2757

(outside of U.S. 330-722-5033). DO NOT CALL

RETAILER OR RESELLER FOR SERVICE

AS THEY ARE NOT AUTHORIZED TO

RESOLVE ANY SERVICE ISSUES.

FOR FEDERAL SAFETY STANDARD

COMPLIANCE CERTIFICATES, PLEASE VISIT

OUR WEBSITE AT

www.childcraftbaby.com

Record the information for your product here:

Model number:

Manufacture date:

PO number:

Models Covered: F61301.

• Adult assembly required.

• Read all instructions BEFORE assembly and USE

of product. KEEP INSTRUCTIONS FOR FUTURE

USE.

• Unpack carton, remove packing materials,

including poly bag. Identify and check all parts.

ASSEMBLY INSTRUCTIONS

THIS IS THE ASSEMBLY INSTRUCTIONS FOR CRIBS SOLD IN THE UNITED STATES

A. 6mm x 80mm Allen Head Bolt

B. 6mm x 60mm Allen Head Bolt

C. 6mm x 20mm Allen Head Bolt

D. Joint Connector 6mm Thread

E. Dowel 10mm Dia X 40mm

F. 6mm Connector Nut

G. 6mm Joint Connector

H. 6mm Connector Nut

I. 4 mm Allen Wrench

J. 6mm x 10mm Allen Head Bolt

K. Front Support Bracket

L. Mattress Support Bracket Right

M.Mattress Support Bracket Left

N. Stationary Side Assy (Back )

O. Stationary Post Left (Back)

P. Stationary Post Right (Back)

Q. Headboard Assembly

R. Front Assembly

S. Front Post - Right

T. Front Post - Left

U. Footboard Assembly

V. Mattress Support

W. 3” Mattress

X. Brace Block Right

Y. Brace Block Left

AA. 2” Locking Caster

BB. 2” Non Locking Caster

Hardware Package

AB20046_G3

O P Q

Crib Parts

PARTS LIST

Part Description Part Number Quantity

11200324

11200326

11200384

11200330

11200323

11200331

11200395

11200394

11200070

11200393

11200380

11200378

11200379

22301009

22301065

22301066

22301820

22301004

22301063

22301064

22301819

22301062

21100123

22301028

22301029

12100056

12100055

PREPARATION

Carefully remove and lay out all hardware and parts.

Check quantities and match the parts list. Construct

Crib on an even at oor.

Note: during the assembly process whenever

using screws or bolts, Check each with the parts list

by letter and size identication. Place each screw

or bolt on the diagram of the item which is sketched

actual size. Be sure to use the proper size specied

in the assembly directions. If any parts are missing

or broken or you need assistance with assembly

DO NOT return your product to the dealer.

Please identify the crib by the model number

identication stamped on the inside face of the

Stationary side assembly when you call or write to

Foundations®. Make note of all identification

numbers and include this information with your

request.

DO NOT Substitute Parts!

SUGGESTED TOOLS

#2 Medium Straight Screwdriver, Rubber Mallet

AB20046_G2

C D E

Construct Front assembly:

Place dowel pin in end of top rail of Front Assembly

R into recieving hole in post during assembly.

Place Joint Connectors D into holes in the bottom

of the top and lower rails of Front Assembly R .

Insert 2, 80mm Allen Head Bolts A into Front Post

S . Align Front Post S with Front Assembly R .

Note: Post has 2 holes facing forward as shown in

Figure 2.

Rotate the Joint Connectors D to align threads with

Bolts. Thread Bolts A into Joint Connector D

Snug bolts with Allen Wrench I .

Repeat assembly with Front Post T .

Tighten all bolts securely.

See gure 2.

Figure 1

STEP 1

AB20046_G4

STEP 2

Construct Stationary Side (back) assembly:

Place Joint Connectors D into holes in the bottom

of top and lower rails of Stationary Side Assembly N

Insert 2, 80mm Allen Head Bolts A into Stationary

Post P .

Align Stationary Post P with Stationary Side

Assembly N .

Note: Post has 4 holes facing forward as shown in

Figure 1

Rotate the Joint Connectors D with a straight

screwdriver to align threads with bolts. Thread Bolts

A into Joint Connector D .Snug bolts with Allen

Wrench I .

Repeat assembly with stationary post O .

Tighten all bolts securely.

See gure 1.

Figure 2

AB20046_G5

Figure 3

STEP 3

AB20046_G6

STEP 4

Figure 4

AB20046_G7

Construct Headboard and Footboard assembly:

There are 2 positions for the Front Support Bracket

shown as lower 1 and upper 2 appropriate height

for the intended child as explained in warnings

section.

Insert screw in back side of Front Support Bracket

K into lower blind hole and align upper hole with

through hole in Headboard Assembly Q .

Note: lower screw does not fasten to the wood rail

and is there to prevent rotation of K .

Insert 20 mm bolt C through Bracket and

Connector Nut F through Headboard Assembly Q

and tighten with Allen Wrenchs I .

Insert 2 Wood Dowels E into Brace Block Y .

align with holes in headboard assembly Q and

push together.

Insert Joint connector D into bottom of Brace Block

and align the threads with a straight screwdriver to

accept the Bolt B . Thread B into D .

Tighten all bolts securely with Allen Wrench.

Repeat the above steps for the Footboard assembly

U and use Brace block X .

See gure 3.

Add Headboard and Footboard:

Insert 2 Wood Dowels E into blind holes on the

Foot Board Assembly U . Insert exposed end of

wood dowels E into recieving holes in stationary

post Right P . Insert 2 Joint Connectors D into

Footboard assembly (inside face of back rail) and 1

Joint Connector D into bottom of Brace Block. Align

Joint Connector threads with a straight screwdriver

to accept bolts.

Align Footboard Assembly with Stationary Side

Assembly (Back) and push together. Insert 3 bolts

B through Stationary Side Assembly (Back) and

snug bolts with Allen wrench.

Repeat assembly for Headboard Assembly Q .

After all bolts are in place tighten all securely.

See gure 4, shown from bottom view.

Figure 5

STEP 5

Add Front Assembly:

Insert 4 wood Dowels E into blind holes on

Headboard Assembly Q and Footboard Assembly

U . Insert Joint Connectors D into inside face of

Headboard Assembly Q and Footboard Assembly

U . Align Joint connector threads with a straight

screwdriver to accept Bolts B . Insert Bolts

B into Front Assembly and snug them.

After all bolts are in place tighten all securely.

See gure 5 shown from bottom view.

AB20046_G8

AB20046_G9

Figure 6

STEP 6

Attach Mattress Support Brackets:

Note: Face of Mattress Support with warning sheet

applied must face upwards for the below procedure.

Align Mattress Support Bracket L with holes in

Mattress Support V making sure lip is under

Mattress Support V . Insert 2 of the 6 mm

Connector Nuts H from underneath through holes.

Place 6mm x 10mm Allen Head Bolts J through top

and snug together.

Repeat the above steps to attach Mattress Support

Bracket M to the opposite end of Mattress Support

V .

Tighten Screws and Connector Nuts securely with

Allen Wrenches.

See gure 6.

Figure 8

Figure 7

AB20046_G10

Add Mattress Support to crib.

There are 2 positions for the Mattress Support V

shown as lower 1 and upper 2 . Refer to warning

section to determine appropriate height for the

intended child. The position must be the same as

the position of the Front Support Brackets K .

The Mattress Support V is lowered into the crib

until the front rests on the Front Support Brackets K

Align the Mattress Support Brackets L and M with

the holes in the crib. Insert Joint Connector G into

hole in L and M from inside of crib then through

correct height hole in the crib. Thread Bolt C from

the outside into the Joint Connector G .

Tighten securely with Allen wrenches.

NOTE: Do not overtighten Bolt C and Joint

Connector G . They are designed to move

freely after being tightened to permit

Mattress Support to pivot.

See gure 7.

AB20046_G11

STEP 7

STEP 8

Add Casters to crib.

Place 2 Non Locking Casters BB in the Stationary

Side Assembly (Back). Place stem of Caster into

hole in bottom of leg and push until fully engaged.

Place 2 Locking Casters AA into Front Assembly.

Place stem of Caster into hole in bottom of leg and

push until fully engaged.

With the Casters in place use a rubber mallet or

similar tool and tap the Casters into the inserts until

the caster stem is fully engaged.

Note: Once the casters are fully engaged and

installed they cannot be removed without

damaging crib.

See gure 8 shown from bottom view.

Figure 9

AB20046_G12

FOLDING CRIB FOR STORAGE

Step 1 lift spring up with mattress.

Step 2 Fold sides in to close crib.

Step 3 Secure the crib in the closed position. Using

the Velcro loop fasteners attached on

the bottom of the Mattress Support V , wrap

the Velcro around the slats (spindles) in the

Front Assembly.

See gure 9.

Maintenance Cleaning and Storage

MAINTENANCE:

Upon completion of the assembly, check to make sure all screws, bolts and connectors are tightened and

secure.

Periodically check crib for damaged hardware, loose joints, missing parts or sharp edges before and after

assembly and frequently during use.

DO NOT use crib if any parts are missing or broken.

If any parts are missing, broken or you need Assistance DO NOT return crib to your dealer.

Call Foundations® at 330.722.5033 and include model identication numbers recorded on page 1.

DO NOT substitute parts.

CLEANING:

Mix a mild solution of gentle dishwashing soap and water, apply to surface using a clean cloth lightly

dampened in the solution. Rinse well with clear water using a soft clean cloth, then dry all surfaces with a

soft dry cloth.

DO NOT use abrasive cleaners or any cleaners with harsh chemicals that would contact a child’s

skin, scouring pads, steel wool or coarse rags. This crib should be treated the same as any ne

furniture.

STORAGE:

When storing crib use Caution as extreme temperature or humidity changes could be harmful.

Use caution when a vaporizer is in use. Always aim vapor stream away from crib as well as away

from any wood furniture item.

After completing the assembly the user is advised to read and be aware of ALL WARNINGS,

CAUTIONS, CLEANING, STORAGE USE AND MAINTENANCE notices in these directions and

printed on the top surface of Mattress Support. A pouch is attached to the underside of the

Mattress Suport for the permanent storage of the assembly directions. Please place the

complete set of assembly directions into the pouch for future referral. We caution the user to Not

place excess hardware in the pouch as it could present danger to the child if retrieved.

WARNING

Infants can suffocate if improperly fitted mattresses

or improperly fitted sheets are used. Use only

Foundations replacement mattresses and sheets.

To purchase properly fitting mattresses and sheets,

call 330-722-5033 or online at www.foundations.com

or contact your authorized Foundations dealer.

● The crib, including side rails, must be fully erected prior to use. Make sure latches are

secure.

● Strings can cause strangulation! NEVER place items with a string around a child’s neck

such as hood strings or pacifier cords. NEVER suspend strings over crib or attach

strings to toys.

● Discontinue use of the crib when child is able to climb out or reaches the height of 35

inches (89 cm).

● Child can become entrapped and die when improvised netting or covers are placed on

top of product. NEVER add such items to confine child in product.

● When child is able to pull to a standing position, set mattress to lowest adjustable

position and remove bumper pads, large toys and other objects that could serve as steps

for climbing out.

● NEVER place crib near window where cords from blinds or drapes can strangle a child.

● Use ONLY the mattress provided by the manufacturer (which must be at least

37 3/4 inches (96 cm) long by 23 3/4 inches (60.4 cm) wide and not more than 3 inches

(7.6 cm) thick.

● Always provide the supervision necessary for the continued safety of your child. When

used for playing, NEVER leave child unattended.

● To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their

back to sleep, unless otherwise advised by your physician.

● NEVER use this product if there are any loose or missing fasteners, loose joints, broken

parts, or torn mesh/fabric. Check before assembly and periodically during use. Contact

Foundations for replacement parts. Never substitute parts.

● NEVER use plastic shipping bags or other plastic film as mattress covers not sold

and intended for that purpose. They can cause suffocation.

● NEVER use a water mattress with this crib.

● If renishing, use a non-toxic nish specied for children’s products.

● DO NOT use crib near objects that child could reach or pull into crib and cause injury

such as lamps, heaters, fireplaces, or ironing boards.

● To avoid injuries, do not allow children to climb or play on or under the crib.

Meets CPSC

Safety Requirements

5216 Portside Dr.

Medina Ohio 44256 USA

Telephone: 330.722.5033

Fax: 330.722.5037

www.childcraftbaby.com

WARNING

Infants can suffocate

• In gaps between a mattress too small or too thick and sides of crib.

• On soft bedding. NEVER add a mattress, pillow, comforter or padding.

WARNING

FAILURE TO FOLLOW THESE WARNINGS AND THE INSTRUCTIONS COULD RESULT IN SERIOUS

INJURY OR DEATH.

Inhaltsverzeichnis

Andere Child Craft Baby- und Kleinkindmöbel Handbücher

Child Craft

Child Craft F21401 Bedienungsanleitung

Child Craft

Child Craft Elin F07116 Bedienungsanleitung

Child Craft

Child Craft LEGACY SINGLE DROPSIDE CRIB WITH DRAWER Bedienungsanleitung

Child Craft

Child Craft F01216 Bedienungsanleitung

Child Craft

Child Craft Cranbrook F33301 Bedienungsanleitung

Child Craft

Child Craft Orbit Euro F10201 Bedienungsanleitung

Child Craft

Child Craft SINGLE DROPSIDE CRIB Bedienungsanleitung

Child Craft

Child Craft Delaney F31601 Bedienungsanleitung

Child Craft

Child Craft CONVERTS TO TODDLER BED AND FULL SIZE HEADBOARD AND... Bedienungsanleitung

Child Craft

Child Craft Wynwood F11501 Bedienungsanleitung

Child Craft

Child Craft Forte Flat Top Crib F34301 Bedienungsanleitung

Child Craft

Child Craft Lucas F06709 Bedienungsanleitung

Child Craft

Child Craft Redmond F32801 Bedienungsanleitung

Child Craft

Child Craft Orbit F30201 Bedienungsanleitung

Child Craft

Child Craft Jordyn F05419 Bedienungsanleitung

Child Craft

Child Craft Penelope F36901 Bedienungsanleitung

Child Craft

Child Craft Legacy Crib Bedienungsanleitung

Child Craft

Child Craft 15061 Bedienungsanleitung

Child Craft

Child Craft Monterey F10391 Bedienungsanleitung

Child Craft

Child Craft Atwood F11801 Bedienungsanleitung

Child Craft

Child Craft Bristol F99040 Bedienungsanleitung

Child Craft

Child Craft F32401 Bedienungsanleitung

Child Craft

Child Craft F02316 Bedienungsanleitung

Child Craft

Child Craft 1216 Bedienungsanleitung

Beliebte Baby- und Kleinkindmöbel Handbücher anderer Marken

Mocka

Mocka Learning Tower Bedienungsanleitung

VERTBAUDET

VERTBAUDET 62003-2789 Bedienungsanleitung

Summer

Summer MY FUN POTTY Bedienungsanleitung

Grotime

Grotime Changeover Bedienungsanleitung

Fillikid

Fillikid 1221 Bedienungsanleitung

Relita

Relita loft bed ALEX Bedienungsanleitung

Joovy

Joovy Qool Bedienungsanleitung

KidKraft

KidKraft Step n Store Bedienungsanleitung

Fisher-Price

Fisher-Price L4889 Bedienungsanleitung

Germania

Germania Moon 4048.101 Bedienungsanleitung

BabyGo

BabyGo Amila Bedienungsanleitung

Fisher-Price

Fisher-Price CBV06 Bedienungsanleitung

Fisher-Price

Fisher-Price H4790 Bedienungsanleitung

Graco

Graco Dream Suite Bedienungsanleitung

Delta Childrens Products

Delta Childrens Products BB87116CR Bedienungsanleitung

Costway

Costway BB5591 Bedienungsanleitung

SAUTHON

SAUTHON UP CHENE DORE UI101A Bedienungsanleitung

Delta Children

Delta Children Classic Bedienungsanleitung