Child Craft Bristol F99040 Bedienungsanleitung

THIS IS THE ASSEMBLY INSTRUCTIONS FOR CRIBS SOLD IN CANADA

INSTRUCTIONS D’ASSEMBLAGE POUR LES LITS DE BÉBÉ VENDUS AU CANADA

AB20098C

AB20097A_G1

Assembled Crib

Foundations Worldwide, Inc.

5216 Portside Dr., Medina, OH 44256 USA • PH: 1 330.722.5033 • FAX: 1 330.722.5037

www.childcraftbaby.com

ASSEMBLY ASSISTANCE

IMPORTANT: retain for future reference read

carefully.

Foundations strives for the highest quality in our

products but occasionally a missing part or problem

can occur during assembly.

If any parts are missing or broken or you need

assistance with assembly, DO NOT return the

product to your dealer. Go to our website at

www.childcraftbaby.com or call Foundations for

assistance at 1-877-716-2757 (U.S. Only) or

1-330-722-5033 (Monday through Friday, 9:00

a.m.– 4:00 p.m. Eastern Time). Please have the

model number and manufacture date available

when you call or write us at: Foundations,

5216 Portside Dr., Medina, OH. 44256

Read all instructions BEFORE assembly and USE of product.

KEEP INSTRUCTIONS FOR FUTURE USE.

FOR CUSTOMER SERVICE CALL

1-877-716-2757

(outside of U.S. 330-722-5033). DO NOT CALL

RETAILER OR RESELLER FOR SERVICE

AS THEY ARE NOT AUTHORIZED TO

RESOLVE ANY SERVICE ISSUES.

FOR WARRANTY AND FEDERAL SAFETY

STANDARD COMPLIANCE CERTIFICATES,

PLEASE VISIT OUR WEBSITE AT

www.foundations.com

Record the information for your product here:

Model number:

Manufacture date:

PO number:

• Adult assembly required.

• Read all instructions BEFORE assembly and USE

of product. KEEP INSTRUCTIONS FOR FUTURE

USE.

• Unpack carton, remove packing materials,

including poly bag. Identify and check all parts.

ASSEMBLY INSTRUCTIONS

Bristol™ Compact Stationary Side Crib

Models Covered: F99040

AB20097A_G2

Hardware Package

AB20097A_G3

Crib Parts

PARTS LIST

Part Description Part Number Quantity

PREPARATION

Carefully remove and lay out all hardware and parts.

Check quantities and match the parts list. Construct

crib on an even at oor.

Note: during the assembly process whenever

using screws or bolts, check each with the parts list

by letter and size identication. Place each screw

or bolt on the diagram of the item which is sketched

actual size. Be sure to use the proper size specied

in the assembly directions. If any parts are missing

or broken or you need assistance with assembly

DO NOT return your product to the dealer.

Please identify the Crib by the model number

identication and manufacture date, located on the

End Panel bottom rail, when you call or write to

Foundations. Make note of all identification

numbers and include this information with your

request.

The Allen Head Bolts (C and D) have a friction

enhancing patch on the thread which may cause

resistance during tightening.

DO NOT Substitute Parts!

SUGGESTED TOOLS

#2 Medium Straight Screwdriver

Note: Do not discard spare parts as they may be

used for other congurations.

A. 4mm Allen Wrench

B. 6mm x 60mm Allen Head Bolt

C. 6mm x 14mm Allen Head Bolt

D. 6mm x 20mm Allen Head Bolt

E. 6mm Connector Nut

F. Joint Connector 6mm Thread

G. Locking Caster

H. Non-Locking Caster

I. Slatted End Panel

J. Stationary Side (Without Logo)

K. Stationary Side (With Logo)

L. Spring

M. Mattress

11200451

11200452

11200453

11200454

11200455

11200456

12100050

12100051

22301345

22301274

22301346

11200420

21100123

Figure 1

STEP 1

AB20097A_G4

STEP 2

Construct Back Assembly:

IMPORTANT SAFETY NOTICE: When assembling the

crib, labels on the End Panels (I) MUST face toward the

inside of the crib. If crib is assembled incorrectly, it could

create an entrapment hazard between the mattress and

the End Panels (I). Observe labeling to identify the inside

face.

Align receiving holes in End Panel (I) with holes on

Stationary Side (J). Place Joint Connector Nut (F)

into hole in bottom of (J) at top and bottom rails.

Insert Allen Bolt (B) into top and bottom holes.

Rotate (F) as needed with straight screwdriver to

align threads with bolt (B). Snug all bolts with Allen

Wrench (A).

Repeat this step to attach opposite End Panel (I).

Tighten all bolts securely.

See Figure 1.

Figure 2

AB20097A_G5

Toddler

Position 2

Newborn

Labels

Install Spring assembly:

Rotate mounting arms on metal Spring (L) to

approximately 45º angle (as shown).

Determine which mattress height will be used in the crib.

Note: If child is able to push up on hands and knees, set

mattress to lowest position (Toddler Position 2).

Place Spring (L) with storage pouches on top into

crib at height appropriate for intended child (1,2).

Secure mounting arms to End Panel (I) using

Allen Bolts (C) and Connector Nuts (E) into all

corner posts at same height holes. Note: Each Allen

Head Bolt (C) has a friction enhancing patch applied

to the threads which will cause some resistance

during the tightening process.

Tighten all bolts securely with Allen Wrench (A).

To adjust the height of the Spring (L), unthread the

Allen Bolts (C) and move the Spring (L) to the other

height shown in Figure 2. Then follow the above

process to attach Spring (L) to the new location.

See Figure 2.

Figure 3

AB20083A_G6

STEP 4

Filling Empty Holes In End Panels:

Additional Allen Head Bolts (C) and Connector Nuts

(E) are supplied to ll open holes in the End Panels to

prevent possible nger entrapment of a child. There are

2 empty holes (one in each post) in each of End Panels

(I) which can be used as a second possible height

adjustment of the Mattress Support Assembly.

Use 1 Allen Head Bolt (C) and 1 Connector Nut (E)

to ll each hole.

Insert Allen Head Bolt (C) from inside face and

thread into Connector Nut (E) which will be installed

from the outside face as shown.

Thread together and tighten using Allen Wrenches

(A).

Insert Allen Head Bolts (C) and Connector Nuts (E)

into all 4 empty holes.

See Figure 3.

STEP 3

Construct Front Assembly:

Attach the remaining Stationary Side (K) to the opposite

side of End Panels (I) using the same process described

in Step 1. Refer to Figure 1 diagram.

STEP 5

Install Casters:

(2) Casters (G) which have a built in locking brake and

(2) Casters (H) which do not have a built in locking brake

are supplied with this crib.

Note: Install the (2) Casters with Locking Brake on same

side of crib that Childcraft Logo on Stationary Side (K) is

on.

Install Casters (G and H) by sliding attached mounting

bracket over bottom end of each post on End Panels (I).

Attach each Caster (G and H) using (2)

Allen Head

Bolts

(D) and (2) Connector Nuts (E) as shown.

Align holes in Caster bracket with hole in post and

insert Allen Head Bolts (D) and Connector Nuts (E)

Once in the correct position, hold caster tightly

against bottom of post, t

hread

Allen Head Bolts (D)

and Connector Nuts (E) together and tighten securely

using Allen Wrenches (A).

Note: Each

Allen Head Bolt

(D) has a friction

enhancing patch applied to the threads which will

cause some resistance during the tightening process.

See Figure 4.

Figure 4

AB20097A_G7

Logo

STEP 6

Install Mattress:

Insert

Mattress (M)

into crib.

This completes the assembly.

Refer to remaining areas on the following pages prior to

use.

AB20097A_G1

Figure 5

Maintenance Cleaning and Storage

MAINTENANCE:

Upon completion of the assembly, check to make sure all screws, bolts and connectors are tightened and

secure.

Periodically check crib for damaged hardware, loose joints, missing parts or sharp edges before and after

assembly and frequently during use.

DO NOT use crib if any parts are missing or broken. If any parts are missing, broken or you need

assistance DO NOT return crib to your dealer. Call Foundations at 330.722.5033 and include model

identication numbers recorded on page 1. DO NOT substitute parts.

CLEANING:

Mix a mild solution of gentle dish washing soap and water, apply to surface using a clean cloth lightly

dampened in the solution. Rinse well with clear water using a soft clean cloth, then dry all surfaces with

a soft dry cloth. DO NOT use abrasive cleaners or any cleaners with harsh chemicals that would contact

a child’s skin, scouring pads, steel wool or coarse rags. This crib should be treated the same as any ne

furniture.

STORAGE:

When storing crib use caution as extreme temperature or humidity changes could be harmful.

Use caution when a vaporizer is in use. Always aim vapor stream away from crib as well as away from any

wood furniture item.

After completing the assembly the user is advised to read and be aware of ALL WARNINGS, CAUTIONS,

CLEANING, STORAGE USE AND MAINTENANCE notices in these directions and printed on the storage

pouch on the crib spring. A printed pouch is attached to the crib spring for the permanent storage of the

assembly directions. Please place the complete set of assembly directions into the pouch for future

referral. We caution the user to not place excess hardware in the pouches as it could present danger to

the child if retrieved.

Mattress Support Adjustment

Crib has two (2) mattress height adjustment positions - Newborn Position and Toddler Position.

NEWBORN POSITION 1

• The Newborn Position 1 is for use only with children

that are not able to push up on their hands and

knees.

• Set mattress to lowest adjustment position

(Toddler Position 2) when child begins to push up

on hands and knees or pull to a standing position,

whichever occurs rst. Remove bumper pads,

large toys, and other objects that could serve as

steps for climbing out.

AB20084A_G15

WARNINGS

TODDLER POSITION 2

• Crib should not be used once child reaches

maximum height allowed (refer to next page for

maximum height of child).

•

When child is able to push up on hands and knees

remove bumper pads, large toys, and other objects

that could serve as steps for climbing out.

AB20084A_G16

WARNINGS

Meets CPSC

Safety Requirements

5216 Portside Dr.

Medina, OH 44256 USA

Telephone: 330.722.5033

Fax: 330.722.5037

www.childcraftbaby.com

IMPORTED BY:

Foundations Worldwide Inc.

30 Casebridge Court Scarborough

ON M1B 3M5

330.722.5033

• DO NOT use this crib if you cannot exactly follow the instructions that come with it.

• DO NOT use this crib for a child who can climb out of it or who is taller than 90 cm.

• DO NOT place any cord, strap or similar item in or near this crib that could become

wrapped around a child’s neck.

• DO NOT place this crib near a window or a patio door where a child could reach the

cord of a blind or curtain and be strangled.

• Check this crib regularly before using it and do not use it if any parts are loose or

missing or if there are any signs of damage. Do Not substitute parts. Contact

Foundations if replacement parts or additional instructions are needed.

• Children can suffocate on soft bedding. Do not place pillows, comforters or soft

mattresses in this crib.

• Use only the mattress supplied by the manufacturer with this crib. Do not add an

additional mattress to this crib.

• Mattress dimensions must be at least 96 cm long by 60.4 cm wide and not more

than 7.6 cm thick.

WARNINGS

Inscrivez les renseignements de votre

produit ici :

Numéro de modèle :

Date de fabrication :

No de commande :

GUIDE D’ASSEMBLAGE

IMPORTANT: conserver pour consultation

future - lire attentivement.

Foundations met tout en œuvre pour fabriquer des

produits de la plus haute qualité. Néanmoins,

malgré tous nos efforts, il arrive parfois qu’une

pièce manque ou qu’une difculté se présente

pendant l’assemblage. Si une pièce est manquante

ou brisée, ou si vous avez besoin d’aide pour

assembler le produit, NE retournez PAS le produit

au détaillant. Visitez notre site Web au

www.childcraftbaby.com ou demandez de l’aide

à Foundations en composant le 1-877-716-2757

(É.-U. seulement) ou le 1-330-722-5033 (du lundi

au vendredi, de 9 h 00 à 16 h 00, heure de l’Est).

Assurez-vous de disposer du numéro de modèle

et de la date de fabrication du produit lorsque vous

nous appelez ou nous écrivez au : Foundations,

5216 Portside Dr., Medina, OH. 44256

Veuillez lire toutes les instructions AVANT de commencer l’assemblage et

l’UTILISATION de ce produit. CONSERVEZ CES INSTRUCTIONS

À TITRE DE RÉFÉRENCE.

THIS IS THE ASSEMBLY INSTRUCTIONS FOR CRIBS SOLD IN CANADA

INSTRUCTIONS D’ASSEMBLAGE POUR LES LITS DE BÉBÉ VENDUS AU CANADA

AB20084B

AB20097A_G1

Lit assemblé

Foundations Worldwide, Inc.

5216 Portside Dr., Medina, OH 44256 É-U • Téléphone: 1 330.722.5033 • Télécopieur: 1 330.722.5037

www.childcraftbaby.com

Lit SafetyCraft

® Compact xe Side

POUR LE SERVICE À LA CLIENTÈLE, APPELEZ LE

1-877-716-2757

(à l’extérieur des É-U, appelez le 1-330-722-5033).

N’APPELEZ PAS LE VENDEUR OU LE DISTRIBUTEUR

POUR LE SERVICE À LA CLIENTÈLE, CAR ILS NE SONT

PAS AUTORISÉS À RÉSOUDRE CE

GENRE DE PROBLÈMES.

GARANTIE ET SÉCURITÉ FÉDÉRAL

CERTIFICAT DE CONFORMITÉ Le STANDARD,

S’IL VOUS PLAÎT VISITEZ NOTRE SITE WEB

www.foundations.com

• L’assemblage doit être effectué par un adulte.

• Veuillez lire toutes les instructions AVANT de

commencer l’assemblage et l’utilisation du produit.

• Déballez le produit et enlevez les matériaux

d’emballage, y compris le sac en polyéthylène.

Identiez et vériez toutes les pièces.

INSTRUCTIONS D’ASSEMBLAGE

Les modèles visés: F99040

A. Clé hexagonale de 4 mm

B. Boulon hexagonal de 6 mm x 60 mm

C. Boulon hexagonal de 6 mm x 14 mm

D. Boulon hexagonal de 6 mm x 20 mm

E. Écrou de raccord de 6 mm

F. Joint de raccord de 6 mm - leté

G. Roulette de verrouillage

H. Roulette non verrouillage

I. Lattes Groupe End

J. Côté stationnaire (sans logo)

K. Côté xe (avec le logo)

L.Ressort

M. Matelas

AB20097A_G2

Emballage de ferrures

AB20097A_G3

Pièces du lit de bébé

LISTE DES PIÈCES

Description des pièces Numéro de pièce Quantité

PREPARATION

Déballez, puis étalez avec soin devant vous tout le

matériel. Consultez la liste des pièces pour vous

assurer qu’il ne manque rien. Assemblez le lit de

bébé sur une surface plane.

Remarque : lors de l’assemblage, avant d’utiliser

les vis et les boulons, vériez chaque pièce en

comparant la lettre et la taille dans la liste des

ferrures. Placez la vis ou le boulon sur le dessin,

tracé à la taille réelle. Veillez à choisir la bonne

grosseur indiquée dans ces instructions. Si une

pièce est manquante ou brisée, ou si vous avez

besoin d’aide pour assembler le produit, NE

retournez PAS le produit au détaillant. S’il vous

plaît identier le Lit par l’identication et la

fabrication du numéro de modèle jour, situé sur le

rail de bas de panneau d’extrémité, lorsque vous

appelez ou écrivez des fondations. Prenez note de

tous les numéros d’identication et fournissez ces

informations lors de votre demande.

La boulons à tête Allen (C et D) ont une friction

améliorer patch sur le l qui peut entraîner une ré-

sistance lors du serrage.

NE substituez PAS de pièces!

Note: Ne jetez pas les pièces qui restent après

l’assemblage, car elles pourraient être utilisées dans

d’autres congurations.

OUTILS SUGGÉRÉS

Tournevis à lame plate moyen nº 2.

11200451

11200452

11200453

11200454

11200455

11200456

12100050

12100051

22301345

22301274

22301346

11200420

21100123

Inhaltsverzeichnis

Sprachen:

Andere Child Craft Baby- und Kleinkindmöbel Handbücher

Child Craft

Child Craft F21401 Bedienungsanleitung

Child Craft

Child Craft Monterey F10391 Bedienungsanleitung

Child Craft

Child Craft Forte Flat Top Crib F34301 Bedienungsanleitung

Child Craft

Child Craft Kieran F33201 Bedienungsanleitung

Child Craft

Child Craft Kieran F13201 Bedienungsanleitung

Child Craft

Child Craft CRIB'N'DOUBLE BED Bedienungsanleitung

Child Craft

Child Craft Jordyn Euro F35404 Bedienungsanleitung

Child Craft

Child Craft Orbit F30201 Bedienungsanleitung

Child Craft

Child Craft F32401 Bedienungsanleitung

Child Craft

Child Craft Jordyn F05419 Bedienungsanleitung

Child Craft

Child Craft Penelope F36901 Bedienungsanleitung

Child Craft

Child Craft Crib'n'Double Bed 34801 Firmware-Update

Child Craft

Child Craft Crib'N'Double 31001 Bedienungsanleitung

Child Craft

Child Craft 10031 Bedienungsanleitung

Child Craft

Child Craft F99106.26 Bedienungsanleitung

Child Craft

Child Craft Elin F37101 Bedienungsanleitung

Child Craft

Child Craft Orbit Euro F10201 Bedienungsanleitung

Child Craft

Child Craft LEGACY SINGLE DROPSIDE CRIB WITH DRAWER Bedienungsanleitung

Child Craft

Child Craft Crib'N'Double Bed Bedienungsanleitung

Child Craft

Child Craft Parisian Full Size Wood Crib F12301 Bedienungsanleitung

Child Craft

Child Craft CONVERTS TO TODDLER BED AND FULL SIZE HEADBOARD AND... Bedienungsanleitung

Child Craft

Child Craft Tremont F44501 Bedienungsanleitung

Child Craft

Child Craft Westgate F38201 Bedienungsanleitung

Child Craft

Child Craft Legacy Crib Bedienungsanleitung

Beliebte Baby- und Kleinkindmöbel Handbücher anderer Marken

Mocka

Mocka Learning Tower Bedienungsanleitung

VERTBAUDET

VERTBAUDET 62003-2789 Bedienungsanleitung

Summer

Summer MY FUN POTTY Bedienungsanleitung

Grotime

Grotime Changeover Bedienungsanleitung

Fillikid

Fillikid 1221 Bedienungsanleitung

Relita

Relita loft bed ALEX Bedienungsanleitung

Joovy

Joovy Qool Bedienungsanleitung

KidKraft

KidKraft Step n Store Bedienungsanleitung

Fisher-Price

Fisher-Price L4889 Bedienungsanleitung

Germania

Germania Moon 4048.101 Bedienungsanleitung

BabyGo

BabyGo Amila Bedienungsanleitung

Fisher-Price

Fisher-Price CBV06 Bedienungsanleitung

Fisher-Price

Fisher-Price H4790 Bedienungsanleitung

Graco

Graco Dream Suite Bedienungsanleitung

Delta Childrens Products

Delta Childrens Products BB87116CR Bedienungsanleitung

Costway

Costway BB5591 Bedienungsanleitung

SAUTHON

SAUTHON UP CHENE DORE UI101A Bedienungsanleitung

Delta Children

Delta Children Classic Bedienungsanleitung