Child Craft CRIB’N’DOUBLE Bedienungsanleitung

CCH02703:12/99 JCHEpm6.5 CRIB’N’DOUBLE BED W/DRAWER

CONVERTS TO DAYBED OR FULL

SIZE HEADBOARD

CHILD CRAFT INDUSTRIES, INC.

P.O. Box 444, Salem, IN USA 47167-0444

PH:812-883-3111-FAX: 812-883-1819 - http://www.childcraftind.com

ASSEMBLY DIRECTIONS AND PARTS LIST

ΦREADALLINSTRUCTIONSWITHCAREBEFORESTARTINGTHEASSEMBLYPROCEDURE.

ΦΦ

ΦYOU WILL NEED A PHILLIPS SCREWDRIVER, A STANDARD SLOTTED SCREWDRIVER, A 10mm (3/8”) WRENCH,

AND THE ENCLOSED ALLEN WRENCH (UU

U) AND HEXHEAD WRENCH (VV

V).

PARTS ENCLOSED IN HARDWARE BAG

(

NOTED

WHEN

SHOWN

ACTUAL

SIZE

) DO NOT SUBSTITUTE PARTS!

ABCDE

(4) Flathead

Phillips Wood

Screw

(4) Hexhead

Machine Screw (8) F/H Phillips Wood Screw (4) Pan Head

Machine Screw (10) Pan Head

Combo Wood

Screw

(actualsize)

(1)

Lower

Track

Assembly

(Right)

(1)

Lower

Track

Assembly

(Left)

(4) Allenhead K-D Bolts

(actualsize)

(4) Insert Locknuts

(2) Upper Tracks

(2) PanHeadPhillips

Wood Screw

(actualsize)

(4) K-D Bolt Plugs

(4) Hole Button Covers

(actualsize)

S(3) PanheadPhillips

Wood Screw

(actualsize)

(8) Flathead Phillips

Wood Screw

(actualsize)

(1) Allen Wrench

(actualsize)

(2) Rubber

Washers (2) R/HCombo

Machine Screw

(actualsize)

W(4) Mini Blocs

child craft

V(1) Hexhead Wrench

P(2) 4-Position Spring Bracket

(1) Sta-Bar Bracket -Left (1) Sta-Bar Bracket -Right

PARTS ENCLOSED IN CARTON (CONTINUED ON PAGE TWO)

(16) Washers

(actualsize)

(1) Drawer Rail - Right AA

(1) Drawer Rail - Left BB

(1) Drawer ”Cabinet Rail” - Right Y

(1) Drawer ”Cabinet Rail” - Left Z

(actualsize)

33301.06

(actualsize) (actualsize) (actualsize)

H00106

H00109

H00120

H00132

H00133

H00164

H00171

H00190

H00211 H00248

H00251(B) H00250(W)

H00254

H00281

H00282

H00288

H00365(B) H00358(W)

H00366(B)

H00361(W)

H00367(B)

H00362(W)

H00371

H00956

H01168

H00185

(actualsize)

PARTS ENCLOSED IN CARTON (CONTINUED FROM PAGE ONE)CCH02703:12/99

(1) Headboard JJ

(1) Footboard II

(1) Stationary Side KK (1) Dropside LL

(1) Crib Spring MM

plasticpouch

(1) Stabilizing Bar NN

PREPARATION

Carefully remove and lay out all hardware and parts. Check quantities and match the Hardware List and the Parts List. NOTE: During the assembly

process whenever using screws or bolts, check each with the Hardware List by letter and size identification. Place each screw or bolt

on the diagram of the item which is sketched actual size. Be sure to use the proper size specified in the assembly directions. If a part

is missing or broken contact your Child Craft dealer or Child Craft, P.O. Box 444, Salem, IN 47167-0444 USA, 812-883-3111, [email protected]

for replacement part(s) or instructional literature. Before making this contact identify your Crib’n’Double Bed by the model identification number stamped

on the label on the inside face of Footboard II bottom rail. Make note of all identification numbers and include this information with your request. DO NOT

SUBSTITUTEPARTS!

Record your model identification number here for future identification: Model #______________________________________

STEP 1- DIAGRAM 1: INSTALL HARDWARE TO FOOTBOARD AND HEADBOARD

NOTE: All wood screws have factory bored pilot holes to start the screws (pilot holes are shown in diagrams).

(HELPFUL HINT: Hardware installation may be

easier if the Footboard

and Headboard

are

(2) Drawer Rails CC (2) Drawer Ends DD

(1) Drawer Partition EE

(1) Drawer Back FF

(1) Drawer Front GG

(1) Drawer Bottom HH

((Style may vary)

placed in a horizontal position on a soft surface being careful not to scratch the crib finish.)

Install Upper Track J to the Footboard II and the

Headboard JJ using two Flathead Phillips Wood Screws Aas shown. Attach 4-position Spring Bracket P using three Pan Head Combo Wood

Screws E as shown.

Mount

Lower Track Assembly Right Fto Footboard II. Start by installing a Combo Pan Head Wood Screw E into the holes

on Lower Track Assembly Right F, through the holes in

Sta-Bar Bracket - Right

O, and into the pilot holes in Footboard Corner Post II. Tighten

securely. Follow the same procedure to attach Lower Track Assembly Left G and Sta-Bar Bracket Left N to Headboard Corner Post JJ. NOTE:

Open slot at top of Lower Track assembly FF

F& GG

G faces the inside of your crib. Install hardware exactly as illustrated.

((Style may vary)

SEEENLARGED VIEW ENLARGED VIEW

PilotHoles

Closed end of

Upper Track J

Slot faces

inside of crib

II EFO

CCH02703:12/99 3

STEP 2- DIAGRAM 2:INSTALL DRAWER RAILS TO FOOTBOARD AND HEADBOARD

STEP 3 - DIAGRAM 3: ATTACH STATIONARY SIDE

Follow diagram exactly for

installing Drawer Rail CC

and Drawer “Cabinet” Rail-

Right Yto Footboard II

and Drawer Rail CC and

Drawer “Cabinet” Rail-Left

Zto Headboard JJ.

Attach Stationary Side KK to Headboard JJ and Footboard II.

Insert each of

the four Allenhead K-D Bolts Hinto receiving holes located in corner posts of

StationarySide KK as shown. Place Stationary Side

KK in alignment and allow K-D Bolts HH

H to continue into ends of top and bottom rails of Headboard

JJ and Footboard II. Insert each of the four K-D Bolt Plugs LL

L as shown. Pull out each K-D Bolt HH

Hjust enough to allow the K-D Bolt Plug LL

Lto

be fully inserted in hole. Tighten all four K-D Bolts HH

Huntil secure using Allen Wrench UU

Uwhile securing K-D Bolt Plugs LL

Lwith a Standard Slotted

Screwdriver. CAUTION: DO NOT OVERTIGHTEN.

Match up these holes

with Wood Screws C

NOTE: See Step 7 - Install the enclosed Washers Xhere if needed,

between Drawer Rail CC and Footboard II and/or Headboard JJ.

DO NOT INSTALL WASHERS XX

XDURING STEP 2. ONLY INSTALL

WASHERS IF THE DRAWER ASSEMBLY FITS TOO LOOSE IN ITS

TRACKS AFTER CRIB IS COMPLETELY ASSEMBLED.

JJ II

Match up these holes

with Wood Screws C

Factory installed Connected View

Standard

Screwdriver

CCH02703:12/99 4

STEP 4 - DIAGRAM 4:ATTACH STABILIZING BAR STEP 5 - DIAGRAM 5: SPRING INSTALLATION

Locate “Tabs” on Spring MM and rotate Tabs upward. Position the

four Tabs on Spring MM to the desired height allowed by the threaded

holes located on the 4-Position Spring Bracket P. Install a Hexhead

Machine Screw B through each Spring Tab and into the selected threaded

receiving hole on Spring Bracket P. Tighten Screws Bwith Hexhead

Wrench Vor a 10mm (3/8”) wrench. Follow the same procedure when

changing spring heights at a later date. Periodically check Hexhead Ma-

chine Screws Band tighten if needed.

STEP 6 - DIAGRAM 6: INSTALL DROPSIDE

Align Plastic Guides

(Factory installed) on

Dropside LL with

dropside hardware

mountedonpost from

underneath. An as-

sistant is very help-

ful. Afterallfourplas-

tic guides are aligned

with the hardware,

liftDropside“UP”and

allow it to latch into

the raised position.

After Dropside LL

is installed on the

tracks and is latched

in the “UP” position,

insert a Machine

Screw R into a

Rubber Washer Q

and thread into hole

in bottom of Lower

Track Assemblies F

&G.

TO LOWER DROPSIDE LLLL

LLLL

LL:

FIRST - LIFT THE DROPSIDE,

SECOND - WITH KNEE PUSH

IN ON CENTER OF BOTTOM

RAIL OF DROPSIDE TO RE-

LEASE LATCH ON LOWER

PLASTIC LATCH. LOWER

DROPSIDE BY HAND. TO

RAISE DROPSIDE LLLL

LLLL

LL: PULL

“UP” UNTIL LOWER PLASTIC

GUIDES LATCH IN SLOT IN

LOWER TRACKS FF

F& GG

G.ALWAYSBESURECRIB SIDEIS“UP”AND“LATCHED”BEFORE LEAVINGCHILDIN CRIB.

Mount the Stabilizing Bar Assembly NN to Footboard II and Head-

board JJ. Insert (2) Pan Head Machine Screws Dthrough the holes

Sta-Bar Bracket - Right

O, and through the holes in Stabilizing Bar

NN. Attach (2) Insert Locknuts Ito Machine Screws D

tighten securely. See Enlarged View for the proper installation of

Locknut II

I. Follow the same procedure for attaching Stabilizing Bar

NN to Headboard JJ.

NorO

Plastic insert in

Locknut I

NOTE: Mount all 4 “Tabs” on Crib Spring MMMM

MMMM

at the same vertical mattress position.

Corner Post of II or JJ Highest mattress position

Lowest mattress position

Mattress side

of Spring MM B

“Tab”

Align Upper

PlasticGuide

with Upper

Track J

Align Lower

PlasticGuide

with Lower

Track F

Align all four plastic guides with installed

tracks from underneath - then lift “UP”

until Lower Plastic Guides latch.

LOCKING MECHANISM

NOTE: It may be necessary to Flex the Locking Mechanism

toward outside of crib to engage the Lower Tracks F& G

CCH02703:12/99

STEP 7 - DIAGRAM 7:ASSEMBLE & INSTALL DRAWER

Refer to the Diagrams and install Mini Blocs Winto each of the

Drawer Ends DD and Drawer Partition EE as shown. NOTE:

Before installing the Mini Blocs be sure that you have the two Drawer

Ends DD aligned exactly as shown in order to have a pair when

complete.

Assemble the Drawer as shown. After the Drawer is assembled,

turn the Drawer upside-down and install two Panhead Screws K

into the holes located in Drawer Bottom HH to secure it to the

Drawer Partition EE.

Install the assembled Drawer under the crib by inserting the rollers

on Drawer Rails AA & BB

(attached to the drawer)

into the

channel of Drawer “Cabinet” Rails Y& Z under the crib.

NOTE: With the drawer bottom grooves

together.....this will result in a pair.

Drawer

Bottom

Grooves

SEEENLARGEDVIEW

WDD

ENLARGEDVIEW

Laminated edge

WTighten the screw in Mini Bloc W

to thread into prebored pilot holes

in the Drawer Front GG

ENLARGEDVIEW2

Phillips Screwdriver

Attach Drawer Rail-Left BB to Drawer End

DD in the same manner as shown for op-

posite end. NOTE: Both roller wheels will go

toward Drawer Back FF.

SEEENLARGEDVIEW2

WDD

FF S

Install in pre-bored holes

on both drawer ends.

Install extra Wood

Screws Tat

these locations.

Insert Drawer Bottom HH into groove on all four sides.

NOTE:IFTHEDRAWERFITSTOOLOOSEINITSTRACKS,

YOUCANADJUSTTHE FITBYADDINGTHEENCLOSED

WASHERSXASSHOWNINSTEP 2-DIAGRAM 2. REMOVE

THEDRAWER.CAREFULLYLAYTHECRIBONITSBACK

TO ALLOW ACCESS TO PARTS C, Y, Z, CC. RE-

MOVE THE DRAWER RAILS AND INSERT A WASHER

OVER EACH SCREW POINT CBETWEEN CC & JJ

AND/OR CC & II. REINSTALL RAIL ASSEMBLY AND

DRAWER. ADDADDITIONALWASHERSIFNECESSARY

REPEATINGTHISPROCESS. INSTALL WASHERS ONLY

IFNEEDED.

Roller

Wheel

DO NOT OVERTIGHTEN

SCREWS IN MINI BLOC WW

6CCH02703:12/99

DIRECTIONS FOR CONVERTING

“CRIB”TO A“DAYBED”DIRECTIONS FOR CONVERSION

TO A“FULL SIZE HEADBOARD”

When use as a crib has been completed, you have the option to

convert to a daybed for years of additional use in your child’s room.

Refer to Step 6 - Diagram 6 and follow direction is reverse order.

Store the removed parts and hardware in the event you wish to

convert your daybed back to a crib. Refer to Sketch A.

Sketch A

(style may vary)

Disassemble crib by first removing the drawer. Store the drawer

without disassembly. Perform Step 6, 5, 4 & 3 in reverse order to

remove the Stationary Side KKKK

KKKK

KK from the other crib parts.Attach

the Stationary Side to a Hollywood style full size bed frame at the

location of the mounting cleats (Hardware is not provided). See

Diagram 8 and Sketch B. Insert the Hole Button Covers M as

shown.

Sketch B

(style may vary)

DIAGRAM 8

Receiving holes for Hole Button Covers M

MountingCleats

(Cleats are flush with the face that the

purchased Hollywood Frame mounts to.)

MAINTENANCEOFYOURCHILD CRAFT CRIB/DAYBED/FULL SIZE HEADBOARD: Upon completionofassemblybesureallscrews, bolts

and fastening devices have been tightened securely. A frequent check should be made of all screws, bolts and fastening devices and

tightened if needed. Before each usage or assembly, inspect crib for damaged hardware, loose joints, missing parts or sharp edges.

DO NOT use crib if parts are missing or broken. Contact your Dealer or Child Craft (812) 883-3111, [email protected] for a

replacement part or instructional literature if needed. Include Model Identification Number with your request which you recorded on

page2oftheseinstructions. DO NOT SUBSTITUTE PARTS. DO NOT MAKE ANYALTERATIONSNOT DESCRIBED IN THESE ASSEMBLY

DIRECTIONS.

CLEANING INSTRUCTIONS FOR YOUR CHILD CRAFT CRIB/DAYBED/FULL SIZE HEADBOARD: Mixtogether amild solutionof gentle

dishwashing liquid and water, apply to surface using a soft clean cloth lightly dampened in the solution. Rinse with clear water again

using a soft clean cloth, then dry all surfaces thoroughly with a soft dry cloth. NO ABRASIVE CLEANERS, SCOURING PADS, STEEL

WOOL,ORCOARSERAGSSHOULDBEUSEDTOCLEAN THISFINEFURNITURE.

STORAGEANDUSE OF YOUR CHILD CRAFTCRIB/DAYBED/FULLSIZEHEADBOARD: Aprintedplasticpouchisattachedtothecribspring

for the permanent storage of the assembly directions. After completing the assembly process you are advised to read and be aware of

allWARNINGS, CAUTIONS, CLEANING, STORAGE, USE AND MAINTENANCE noticescontainedinthissetof directionsandprinted on the

plastic pouch located on the underneath side of the crib spring. You will then place the complete set of assembly directions into the

plastic pouch for future referral by opening storage drawer. We caution you not to place excess hardware in the plastic pouch as it could

present danger to a child if retrieved. When storing crib use CAUTION as extreme temperature or humidity changes could be harmful.

Use CAUTION when a vaporizer is in use, always aim vapor stream away from crib as well as away from any wood furniture item.

(style may vary)

Assembled Crib

(style may vary)

GG DD

Purchased Mattress

(see size requirements on

page 7 under CAUTION)WHENEVER DISASSEMBLING CRIB,DONOT

REMOVE ANY ITEM ATTACHED WITH WOOD

SCREWS AA

A, CC

C, EE

E, KK

K, SS

S, TT

TOR WW

WARNING

ΦΦ

ΦFAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY IN-

STRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

ΦΦ

ΦREAD ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP

INSTRUCTIONS FOR FUTURE USE. A PLASTIC POUCH IS ATTACHED TO

CRIBSPRINGFORPERMANENTSTORAGEOFTHEINSTRUCTIONALLITERATURE.

ΦΦ

ΦBEFORE EACH USAGE OR ASSEMBLY, INSPECT CRIB FOR

DAMAGED HARDWARE, LOOSE JOINTS, MISSING PARTS OR

SHARP EDGES. DO NOT USE CRIB IF ANY PARTS ARE MISSING

OR BROKEN. ASK YOUR DEALER OR WRITE TO CHILD CRAFT,

P.O. BOX 444, SALEM, IN 47167-0444 USA (812)-883-3111) FOR RE-

PLACEMENT PARTS AND INSTRUCTIONAL LITERATURE IF

NEEDED. INCLUDEMODELIDENTIFICATION NUMBERS WITH YOUR REQUEST WHICH

YOU RECORDED ON PAGE TWO. DO NOT SUBSTITUTE PARTS.

ΦΦ

ΦAFTER RAISING SIDE, MAKE SURE LATCHES ARE SECURE.

ΦΦ

ΦWHEN CHILD IS ABLE TO CLIMB OUT OR REACHES THE

HEIGHT OF 35 INCHES (90 CENTIMETERS) THE CRIB SHALL NO

LONGER BE USED.

ΦΦ

ΦDO NOT PLACE CRIB NEAR WINDOW WHERE CORDS FROM

BLINDS OR DRAPES MAY STRANGLE A CHILD.

ΦΦ

ΦIF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR

CHILDREN’S PRODUCTS.

ΦΦ

ΦDO NOT LEAVE CHILD IN CRIB WITH SIDE LOWERED. BE SURE

SIDE IS IN RAISED AND LOCKED POSITION WHENEVER CHILD

IS IN CRIB.

ΦΦ

ΦWHEN CHILD IS ABLE TO PULL TO STANDING POSITION, SET

MATTRESS TO LOWEST POSITION AND REMOVE BUMPER PADS,

LARGE TOYS AND OTHER OBJECTS THAT COULD SERVE AS

STEPS FOR CLIMBING OUT.

ΦΦ

ΦNEVER USE PLASTIC SHIPPING BAGS OR OTHER PLASTIC

FILM AS MATTRESS COVERS BECAUSE THEY CAN CAUSE SUF-

FOCATION.

ΦΦ

ΦDO NOT USE A WATER MATTRESS WITH THIS CRIB.

ΦΦ

ΦREPLACE TEETHING RAIL(S) IF DAMAGED OR LOOSE. (IF

EQUIPPED WITH TEETHING RAILS.)

ΦΦ

ΦSTRINGS CAN CAUSE STRANGULATION! DO NOT PLACE

ITEMS WITH A STRING AROUND A CHILD’S NECK, SUCH AS

HOOD STRINGS OR PACIFIER CORDS. DO NOT SUSPEND

STRINGS OVER A CRIB OR ATTACH STRINGS TO TOYS.

ΦΦ

ΦREMOVE ALL CRIB TOYS WHICH ARE STRUNG ACROSS CRIB

AREA WHEN YOUR CHILD IS BEGINNING TO PUSH UP ON HANDS

AND KNEES OR IS 5 MONTHS OF AGE, WHICHEVER OCCURS

EARLIEST. THESE TOYS CAN CAUSE STRANGULATION.

ΦΦ

ΦWHENDISASSEMBLINGTHISCRIB, DO NOTREMOVEANYITEM

ATTACHED WITH WOOD SCREWS.

ΦΦ

ΦALWAYS ENSURE A SAFE ENVIRONMENT FOR THE CHILD BY

CHECKING REGULARLY, BEFORE PLACING THE CHILD IN THE

CRIB, THAT EVERY COMPONENT IS PROPERLY AND SECURELY

IN PLACE.

CCH02703:12/99

7CAUTION

ΦΦ

ΦANY MATTRESS USED IN

THIS CRIB MUST BE AT

LEAST 27-1/4 INCHES (69

CENTIMETERS), BY 51-5/8

INCHES (131 CENTIME-

TERS), WITH A THICKNESS

NOT EXCEEDING 6 INCHES

(15 CENTIMETERS). THE

DIMENTIONS OF THE MATTRESS

SHALL BE TAKEN FROM SEAM TO

SEAMOREDGETO EDGEWHEREAP-

PROPRIATE.

ΦΦ

ΦUPON COMPLETION OF

ASSEMBLY BE SURE ALL

SCREWS, BOLTS AND FAS-

TENING DEVICES HAVE

BEEN TIGHTENED SE-

CURELY. A FREQUENT

CHECK SHOULD BE MADE

OF ALL SCREWS, BOLTS

AND FASTENING DEVICES

AND TIGHTEN IF NEEDED.

CHILD CRAFT

INDUSTRIES, INC.

P.O. BOX 444

SALEM,IN47167-0444 USA

PH:812-883-3111

FAX:812-883-1819

http://www.childcraftind.com

CCH02703:12/99

JCHE.p65

MADE IN USA

English

▲

Inhaltsverzeichnis

Andere Child Craft Inneneinrichtung Handbücher

Child Craft

Child Craft Universal Select F09428 Bedienungsanleitung

Child Craft

Child Craft FOREVER Eclectic F09009 Bedienungsanleitung

Child Craft

Child Craft Soho F03902 Bedienungsanleitung

Child Craft

Child Craft Soho F03960 Bedienungsanleitung

Child Craft

Child Craft Forever Eclectic Mod F09302 Bedienungsanleitung

Child Craft

Child Craft ROCKPORT F01428 Bedienungsanleitung

Child Craft

Child Craft Wynwood F01509 Bedienungsanleitung

Child Craft

Child Craft FOREVER Eclectic F09028 Bedienungsanleitung

Child Craft

Child Craft Denman F03602 Bedienungsanleitung

Child Craft

Child Craft Surrey Hill F07022 Bedienungsanleitung

Child Craft

Child Craft Soho F03909 Bedienungsanleitung

Child Craft

Child Craft F50001 Bedienungsanleitung

Child Craft

Child Craft Surrey Hill F07028 Bedienungsanleitung

Child Craft

Child Craft FOREVER Eclectic Folio Accent F09304 Bedienungsanleitung

Child Craft

Child Craft Forever Eclectic Cirque F09202 Bedienungsanleitung

Child Craft

Child Craft Universal Select F09409 Bedienungsanleitung

Child Craft

Child Craft Serene F09471 Bedienungsanleitung

Child Craft

Child Craft Glider Rocker F09470 Series Bedienungsanleitung

Child Craft

Child Craft Long Beach F02118 Bedienungsanleitung

Child Craft

Child Craft Universal Select F09402 Bedienungsanleitung

Child Craft

Child Craft Orbit Dresser F00209 Bedienungsanleitung

Child Craft

Child Craft Redmond F02819 Bedienungsanleitung

Child Craft

Child Craft F02902 Bedienungsanleitung

Child Craft

Child Craft Surrey Hill F07009 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung