Cisco TelePresence SpeakerTrack 60 Bedienungsanleitung

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

APRIL 2016

SpeakerTrack 60

Precision 60

Camera guide

for Cisco TelePresence Precision 60 and Cisco TelePrescence SpeakerTrack 60

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

Table of Contents

Introduction ......................................................................3

About this guide..................................................................4

User documentation .......................................................4

Software .........................................................................4

Physical interface .............................................................5

Precision 60........................................................................6

SpeakerTrack 60.................................................................7

Connecting to a codec .....................................................8

Codec compatibility............................................................9

Connect Precision 60 to SX80 Codec .............................10

Connect SpeakerTrack 60 to SX80 Codec ...................... 11

Connect SpeakerTrack 60 to Codec C40 ........................12

Connect SpeakerTrack 60 to Codec C60 ........................13

Connect SpeakerTrack 60 to Codec C90 ........................14

Factory reset ..................................................................15

Precision 60......................................................................16

SpeakerTrack 60............................................................... 17

Reset the device........................................................... 17

Reset the cameras........................................................18

Appendix ........................................................................19

Technical specifications................................................... 20

Precision 60 ................................................................ 20

SpeakerTrack 60 ...........................................................21

Thank you for choosing Cisco!

Your Cisco product has been designed to give you many

years of safe, reliable operation.

This guide is supposed to make you comfortable with the

Precision 60 and SpeakerTrack 60 cameras.

We recommend to visit the Cisco web site regularly for

updated versions of the user documentation.

The user documentation can be found on:

http://www.cisco.com/go/telepresence/docs

How to use this guide

The top menu bar and the entries in the Table of contents

are all hyperlinks. You can click on them to go to the topic.

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Contents

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

CHAPTER 1

Introduction

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Introduction

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

About this guide

This user guide describes the information needed to install and

use the Cisco TelePresence Precision 60 and Cisco TelePresence

SpeakerTrack 60 cameras.

User documentation

The user documentation for the Cisco TelePresence systems,

running the TC software, have several guides aimed at various

user groups.

• Video conference room primer

• Video conference room acoustics guidelines

• Getting started guide for the TelePresence systems

• User guide for the TelePresence systems

• Administrator guides for the TelePresence systems

• API reference guides for the C Series and Codec SX80

• TC Console user guide for the C Series and Codec SX80

•

Physical interfaces guides for the C Series and Codec SX80

• Regulatory compliance and safety information guides

•

Legal and licensing information for products using TC software

Download the user documentation

Go to:http://www.cisco.com/go/telepresence/docs and select

your product to see the user documentation for your product.

Software

The camera software is automatically upgraded through the codec.

Minimum software version requirement is TC 7.1.

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Introduction

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

CHAPTER 2

Physical interface

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Physical interface

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

Precision 60

Video

•

HDMI is the main video source. The maximum resolution

is 1080p60.

•

3G-SDI is the secondary video source. The maximum reso-

lution is 1080p60.

•

In multiple camera scenarios, the HDMI output should be used.

•

For long cable lengths, HDMI extenders supporting EDID

should be used. The extender must not alter the SPA address

or any EDID information incorrectly.

Power

• Connect power (12 VDC, 2.5 A).

• Always use the provided cables and adapter.

Ethernet

For camera control and software upgrades.

Do NOT connect a camera control cable to the Ethernet

codec port of the device. This will destroy the system.

Kensington lock

The Kensington lock may be used to prevent the camera from

being moved from its place or to prevent theft. The LED is lit during a call.

The LED is continuously lit when power is

On, and flickers when receiving signals

from the remote control.

Power

supply

Ethernet

RJ45

HDMI Video

out

3G-SDI out

Display port*

Kensington lock

* For future use

Pin-hole for

factory reset

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Physical interface

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

SpeakerTrack 60

Video

• Two HDMI cables from the cameras.

Power

• Power out to cameras (internal connection).

• Power in: 12 VDC, 6.5 A

Always use the provided cables and adapter.

Ethernet

Two Ethernet ports are used for the internal camera control con-

nection. The third connector is used for connecting the codec.

Do NOT connect a camera control cable to the Ethernet

codec port of the device. This will destroy the system.

Microphone connectors

The right set is used for internal connection to the microphone

panel. The left set of connectors is intended for future use.

Kensington lock

The Kensington lock may be used to prevent the camera from

being moved from its place or to prevent theft.

For more information about the internal connection

setup, please see the SpeakerTrack 60 installation guide:

http://www.cisco.com/go/telepresence/docs

The camera LED is lit during a call on the

camera that is currently sending the live

picture.

The status LED is continuously lit when

power is On, and flickers when receiving

signals from the remote control.

Power out to

cameras

Ethernet

RJ45

codec

Ethernet

RJ45

camera control

Additional

connectors*

Power in USB*

Microphones

on panel

Chinch

connectors*

* For future use

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Physical interface

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

CHAPTER 3

Connecting to a codec

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Connecting the camera

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

Codec compatibility

Precision 60

The Precision 60 camera is compatible with the Cisco

TelePrescence SX80 codec.

SpeakerTrack 60

The SpeakerTrack 60 system is compatible with the following

codecs:

• Cisco TelePrescence SX80 codec

• Cisco TelePrescence C90 codec

• Cisco TelePrescence C60 codec

• Cisco TelePrescence C40 codec

The codec has to run TC 7.1 software or a later version.

Cisco TelePrescence SX80

Codec C40/C60

Codec C90

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Connecting the camera

Cisco TelePresence Precision 60 and SpeakerTrack 60

Camera guide

Connect Precision 60 to SX80 Codec

•

Connect the video cable to one of the codec’s camera inputs

(HDMI). We recommend using the 1st camera input for the

main camera.

• Connect Ethernet to the codec’s 2nd or 3rd Ethernet port.

• Connect to power.

Power

(100-240 VAC, 50/60 Hz)

Power

adapter

Always use the provided power cable

and adapter (12 V

, minimum 3 A).

RJ45

HDMI

Contents

Introduction

Physical interface

Connecting the camera

Appendix

Factory reset

Connecting the camera

Andere Handbücher für TelePresence SpeakerTrack 60

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Konferenzsystem Handbücher

Cisco

Cisco TelePresence SX20 Service-Handbuch

Cisco

Cisco EX90 Bedienungsanleitung

Cisco

Cisco IP Conference Station 7935 Bedienungsanleitung

Cisco

Cisco TelePresence SX20 Service-Handbuch

Cisco

Cisco TelePresence SX10 Bedienungsanleitung

Cisco

Cisco TelePresence DX70 Bedienungsanleitung

Cisco

Cisco TelePresence SX10 Bedienungsanleitung

Cisco

Cisco TelePresence Profile Series Bedienungsanleitung

Cisco

Cisco Room Kit EQ Bedienungsanleitung

Cisco

Cisco TelePresence DX70 Gebrauchsanweisung

Cisco

Cisco 7936 - IP Conference Station VoIP Phone Bedienungsanleitung

Cisco

Cisco TelePresence SX20 Montageanleitung

Cisco

Cisco UC500 series Installationsanleitung

Cisco

Cisco MCU24 Installations- und Betriebshandbuch

Cisco

Cisco EX60 Bedienungsanleitung

Cisco

Cisco TelePresence SX20 Einrichtungshandbuch

Cisco

Cisco TelePresence DX80 Bedienungsanleitung

Cisco

Cisco MX200 G2 Service-Handbuch

Cisco

Cisco TelePresence System Codec C40 Bedienungsanleitung

Cisco

Cisco TelePresence CE9.13 Bedienungsanleitung

Cisco

Cisco Quick Set C20 Service-Handbuch

Cisco

Cisco TelePresence IX5200 Bedienungsanleitung

Cisco

Cisco TelePresence SX20 Originalbetriebsanleitung

Cisco

Cisco 7936 - IP Conference Station VoIP Phone Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung