Cisco TelePresence SX10 Bedienungsanleitung

Place Call

To enter numbers just

press the corresponding

keys on the remote.

To invoke the virtual

keyboard, use the left

arrow Cursor key to move to the 123 eld. You may now

move about the keyboard and select characters. Press OK

to select a character.

Select the green Call eld on the scren or press the green

Call button on the remote to place the call

Use the Cursor keys of

the remote control to

select the Search or Dial

eld, as outlined.

Make sure Call is selected

and press OK or the green

Call button on the remote

control.

Place Call from Contact List Change the Screen Layout

Receive or Decline Calls

Once an entry has been

located, press OK on the

remote control to invoke

the Call menu. Then press

the green Call button or

the OK button on the remote control to place the call.

Use the Cursor keys on

the remote control to

go between Favorites,

Recents and Directory

and then down in one of

the lists.

Make sure Call is selected

and press OK or the green

Call button on the remote

control.

Use the Arrow keys on

the remote control to

move horizontally to the

new layout you would like

to use and press OK.

Navigate to Layout ( ) in

the upper right corner and

press OK on the remote

control. This icon will

appear only when relevant.

Quick Reference Guide

Cisco TelePresence SX10, SX20

CE8.0

If someone calls you,

you may accept, decline

or ignore the call.

If you decline the call,

busy information will be

sent to the calling party.

You may also use the

keys on the remote

control directly.

The Screen and the Remote ControlContent Sharing

Use this feature to share content on your PC in a call or outside a call.

Use this to place

calls

Use this to share

content

Access Standby mode,

System information and the

Do Not Disturb feature

Access the

Camera Control

This icon appears to

indicate that Proximity

has been enabled for

this system

Volume control and Increase/Decrease control

Field selector/

Cursor keys

Go back one step Microphone mute/

unmute

Reject incoming call /

End call / Cancel /

Back to Home screen

(outside calls)

Place call/

Accept incoming call

OK/Enter

Keypad

1 2 3

4 5 6

7 8 9

*0#

pqrs tuv wxyz

defabc

ghi jkl mno

Use the Cursor controls to move about

the screen and press OK/Enter to open

the selected menu eld.

Use the Cancel key to exit a menu (and

return to the Home screen) undoing

any changes. Use the Back key to go

just one step back.

When set to Do Not Disturb, ringtones

are muted and call attempts made by

others to reach you, will appear as

missed calls. You may, however, place

calls as much as you like.

Make sure your

presentation source

is connected and

On. Select Share

and press OK on the

remote control.

Select the source to be

shared and press OK

on the remote control.

The size of the shared

image is controlled by

means of the Minimize/

Maximize eld. Select

this and press OK on

the remote control, if

needed.

To stop sharing content,

select Stop sharing

and press OK on the

remote control.

Quick Reference Guide

Cisco TelePresence SX10, SX20

CE8.0

D1535501 Quick Reference Guide, SX10/SX20 with remote control.

Produced in November 2015 for CE8.0.

Andere Handbücher für TelePresence SX10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Konferenzsystem Handbücher

Cisco

Cisco TelePresence ISDN Link Service-Handbuch

Cisco

Cisco ICS-7750 Bedienungs- und Montageanleitung

Cisco

Cisco TelePresence Profile 55 Bedienungsanleitung

Cisco

Cisco 7936 - IP Conference Station VoIP Phone Bedienungsanleitung

Cisco

Cisco SX80 Bedienungsanleitung

Cisco

Cisco TelePresence System Codec C90 Bedienungsanleitung

Cisco

Cisco Webex Room 70 Panorama Bedienungsanleitung

Cisco

Cisco EX60 Bedienungsanleitung

Cisco

Cisco TelePresence SX20 Service-Handbuch

Cisco

Cisco TelePresence SX10 Bedienungsanleitung

Cisco

Cisco TelePresence DX70 Gebrauchsanweisung

Cisco

Cisco Codec C Series Bedienungsanleitung

Cisco

Cisco TelePresence Touch for MX Series Bedienungsanleitung

Cisco

Cisco SX80 Bedienungsanleitung

Cisco

Cisco MX200 G2 Service-Handbuch

Cisco

Cisco TelePresence System C20 Plus Bedienungsanleitung

Cisco

Cisco TelePresence System Codec C90: Profile 65" Service-Handbuch

Cisco

Cisco TelePresence DX70 Bedienungsanleitung

Cisco

Cisco Desk Bedienungsanleitung

Cisco

Cisco Telepresence MX800 Leitfaden

Cisco

Cisco TelePresence SX10 Bedienungsanleitung

Cisco

Cisco TelePresence SX10 Service-Handbuch

Cisco

Cisco Profile Series Bedienungsanleitung

Cisco

Cisco TelePresence IP VCR 2200 Series Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung