Cisco Telepresence MX200 Bedienungsanleitung

Quickstart Guide

Cisco Telepresence

MX Series

MX200/MX300/MX700/MX800

Quickstart Guide | Cisco Telepresence MX Series

Cisco Telepresence MX Series | Features

1)Activate / deactivate the

Do Not Disturb feature

2)Contact or access the

Helpdesk

3) Activate selfview and

camera settings

4)Press the Microphone

button to mute / unmute

microphone

5) Control the level

of volume

6) Share content and

conduct presentations

7) Activate the voicemail

system, if applicable

8) View upcoming

scheduled meetings

9) View list of contacts

including Favourites,

Directory and Recent

contacts

10) Activate the dial pad

12 3

45678910

Quickstart Guide | Cisco Telepresence MX Series

Place a call

Use any of the following approaches to place a call:

Place a call from Contact List

›Tap the Contacts options, search for someone in a specic list

by tapping that list and scrolling to locate the entry.

›Alternatively, tap the Search or Dial eld which will invoke the

virtual keyboard. Key in the name, number or IP address and

matches will appear as you type. If you need to edit the entry

before you call, tap the More option, and tap Edit & Call which

will invoke the virtual keyboard. Apply the editing. When you

are ready to place the call, press the green Call icon.

Place call using Name

›Tap Dial which will show the numerical dialpad.

›Tap Keyboard and key in the name. Matches will appear as

you type.

›Press the green Call icon when you are ready to place

the call.

Placing and Receiving Calls Placing and Receiving Calls

Place call using an IP address

›Tap Dial and enter the IP address into the numerical dialpad.

Tap and hold * to type the point sign used in

IP addresses.

›Press the green Call icon when you are ready to place

the call.

Place call using Number

›Tap Dial and enter the number into the numerical dialpad.

›Press the green Call icon when you are ready to place

the call.

Quickstart Guide | Cisco Telepresence MX Series

Receive a Call

Use any of the following approaches to receive a call:

Receive Call while in another Call

If you are in a call, another incoming call may be answered.

›Add: If your system is equipped with MultiSite you may merge

the incoming call with the existing. If MultiSite is not an option,

you can still merge the call but only as an audio call.

›Answer & Hold Current: You can accept the incoming call

which will place the existing call on hold.

›Answer & End Current: If you tap this option, you will accept

the incoming call and the current call will end.

›Decline: Decline the incoming call and stay on the current call.

›Incoming Call: Will show the name or number of the person

trying to call.

Placing and Receiving Calls

Transfer Call

›While in a call tap Transfer.

›Locate who you wish to call in the usual way and press the

green Call icon.

›Tap Complete transfer to complete the action.

Consult and Transfer

›While in a call tap Hold.

›Tap Place a New Call and locate whom to call. Place the call in

the usual way.

›Once in the new call, tap Swap to go between the

two parties.

›If you tap Transfer this will connect the two calls together

while you leave the call.

Disconnect from a Call

›To disconnect from a call, tap End.

Mute Call

›The mute button has an LED indicating whether the

microphone is on or muted. If the LED is green the

microphone is on.

Placing and Receiving Calls

Quickstart Guide | Cisco Telepresence MX Series

Put a call on Hold and Resume a Call on Hold

›When on a call, tap Hold to place the call on hold.

›Tap Resume to go back to the call.

Change Call Rate

›Call rate is the term used to express the amount of bandwidth

allocated to the call. The higher the call rate is, the better

the quality will be, but on the expense of higher

bandwidth consumption.

›Before a call, tap More to gain access to the options.

›Tap Call Rate and change the call rate by moving the slider.

Enable Do Not Disturb

›Tap the eld in the upper left corner of the screen.

›Tap Available or Do Not Disturb.

›Tap anywhere outside the menu to exit.

Enable Standby

›Tap the eld in the upper left corner of the screen.

›Tap Standby. The screen will turn itself off after a few seconds.

Tap the screen again to wake it up.

Placing and Receiving Calls

View keypad while in a call

›In a call you may be prompted to submit numbers to reach an

extension or gain entrance.

›During a call tap Keypad.

Placing and Receiving Calls

Quickstart Guide | Cisco Telepresence MX Series

Conference Calls Conference Calls

Add Additional Participants to Existing Call

If your video system allows, you may have the capability to initiate

a video conference with several participants. You must call each

participant one by one.

›While in a call tap Add and locate whom to call, tap Call.

›You may be prompted to tap Merge. This will create the

conference. You may cancel this call without terminating the

rst call you were in by tapping Cancel.

View Meeting Participants List

›In a call, swipe your nger horizontally to the left or tap the

small grey dot. A list will show all the participants, even if they

are on Hold.

Lock Speaker

›During a conference call, voice switching will be active.

This is where the screen will display the speaker. If you wish

to keep the view on one of the participants, you can utilise the

lock speaker.

›While this person is speaking, tap that speaker’s avatar.

Tap Lock as speaker. Once this is activated the eld will

change to Unlock as speaker which you can press to enable

voice switching.

Disconnect Participant from Call

To disconnect a participant from a call:

›Bring up the list of participants and Tap the participant you

wish to disconnect.

›Tap Drop. The participant will be disconnected.

Share Content

Your video system supports the ability to show presentations

during a video call or conference as well as outside a call.

›Tap Present then scroll horizontally to locate the

presentation source. Tap the required source.

›To stop the presentation, tap Stop Presenting.

›To change the Presentation Layout tap Layout and tap your

preferred layout.

Quickstart Guide | Cisco Telepresence MX Series

View Meeting List

Your video system may be connected to a management system

capable of scheduling video meetings. These will appear in a

List of Meetings. You can tap an item in the list to see more

information. Meetings that appear as Private will only show

information about the organiser.

Join Scheduled Meeting

A Meeting Reminder will appear once it is possible to join a

meeting. Starting Now will be shown from 30 seconds before to

30 seconds after the scheduled start time of the meeting.

›Tap Meetings to display the list of meetings.

›A scheduled meeting may connect you automatically or you

may have to tap Join Meeting.

When the meeting starts you will be offered to join in, postpone

the offer to join in for 5 minutes or to dismiss the offer.

If you are in a current call when the new meeting is offered,

you can join in and the previous call will be put on hold as per

previous instructions of answering calls.

Scheduled Meetings

Contact Directory

The Directory serves as your Corporate phonebook. You cannot

edit this; however you can copy entries to your list of Favourites

and edit them there.

Find an entry by scrolling through the list:

›Tap Contacts.

›Tap Directory. Scroll through the list to locate the entry or

tap Search or Dial to enter details into the keypad. Possible

matches will appear as you type.

Call Recents

The Recents list displays the received, placed and missed calls.

To view this list:

›Tap Contacts and Recents.

›To remove an entry, select the entry by tapping it, and then tap

More. Tap Remove from Recents to remove the entry.

A prompt will appear to conrm the intention.

›To clear the entire Recents, scroll to the top of the list and tap

Clear Recents.

Contacts

Quickstart Guide | Cisco Telepresence MX Series

Add Camera Position Preset

Your video system lets you create predened zoom and camera

pointing directions.

›Tap Camera and then Selfview to activate it.

›Adjust Tilt, Pan and Zoom as required.

›Tap Add New and key in a descriptive name.

›Tap Save to put the changes in effect, or tap Cancel to leave

menu with no change.

Edit Existing Camera Preset Position

›Tap Camera and then Selfview.

›Adjust Tilt, Pan and Zoom as required.

›Tap the arrowhead of the preset that requires editing.

›Tap Update to current position to make the changes. To delete

the existing preset tap Remove.

Control Own Camera

Using your camera presets

›While in a call or outside a call, tap Camera and select the

preset to use.

Camera

Adjusting your camera’s pan, tilt and zoom

›While in a call or outside a call, tap Camera.

›Tap Selfview and then adjust the Pan, Tilt and Zoom.

Manage Selfview

Outside a call:

›Tap Camera and then Selfview. You can now adjust the

settings as per the control instructions.

In a call:

›Tap the Selfview avatar. This will allow you to switch it off,

maximize or minimize to view or select Camera to gain access

to the camera controls.

To move the Selfview Picture-inPicture (PiP):

›Tap Selfview in the top right corner of the screen.

›Press and hold your nger in the Selfview area. It will turn blue

which will allow you to drag the view to a new location (these

will be indicated on the screen).

›Once you have found the location you want it in, lift your nger

from the screen. This will set the new location.

›Control the Camera of the Other Participant.

›During a call tap the avatar of the other participant, or the

participant you wish to control.

Camera

Quickstart Guide | Cisco Telepresence MX Series

To access settings, tap the top left corner of the screen and

tap Settings.

Ringtone and Sound

You can specify:

›Keytones: On or Off. When on, every time you tap a eld on the

screen you will hear a sound.

›Ringtone volume.

›Ringtone: you can select various ringtones, to hear a sample

tap a ringtone.

Camera Control

You can set the whitebalance and exposure to camera. You can

also select Auto for the system to do it itself.

Main Source Selection.

You can select what shall be the main source as a default. You

can still choose another when working with the system.

Display

This menu allows you to set the DVI mode – analogue, digital or

automatic detection.

Settings Settings

Language

Here you can choose the language to be used.

System Information

This window contains information regarding the systems software

and hardware versions and connections, SIP etc. In the unlikely

event of a system malfunction, this information is typically what

you will be asked by your technical staff.

Call Status

This window provides information on call rate, encryption as

well as parameters for video and audio. In the unlikely event of a

system malfunction, this information is typically what you will be

asked by your technical staff.

Diagnostic Mode

For troubleshooting purposes you may enable additional system

logging. Follow the on-screen instructions. In the unlikely event

of a system malfunction, this information is typically what you will

be asked by your technical staff.

Restart System

Restart your system as required. No settings are lost.

Quickstart Guide | Cisco Telepresence MX Series

Settings Notes

Administrator Settings

These options will be password protected and include areas such

as set date and time, call details, IP settings, network status, SIP,

factory reset etc.

Andere Handbücher für Telepresence MX200

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Konferenzsystem Handbücher

Cisco

Cisco Codec C Series Bedienungsanleitung

Cisco

Cisco 7935 - IP Conference Station VoIP Phone Bedienungsanleitung

Cisco

Cisco SX80 Service-Handbuch

Cisco

Cisco SX80 Bedienungsanleitung

Cisco

Cisco EX60 Bedienungsanleitung

Cisco

Cisco TelePresence Profile 55 Bedienungsanleitung

Cisco

Cisco SX80 Bedienungsanleitung

Cisco

Cisco TelePresence System TX9000 Kurzanleitung zur Einrichtung

Cisco

Cisco TelePresence SX20 Montageanleitung

Cisco

Cisco EX60 Bedienungsanleitung

Cisco

Cisco TelePresence MX200G2 Bedienungsanleitung

Cisco

Cisco TelePresence DX70 Bedienungsanleitung

Cisco

Cisco EX60 Bedienungsanleitung

Cisco

Cisco EX90 Service-Handbuch

Cisco

Cisco TelePresenceSX10 Bedienungsanleitung

Cisco

Cisco EX90 Bedienungsanleitung

Cisco

Cisco MX300 G2 Bedienungsanleitung

Cisco

Cisco TelePresence Profile Series Bedienungsanleitung

Cisco

Cisco Quick Set C20 Service-Handbuch

Cisco

Cisco TelePresence SX10 Bedienungsanleitung

Cisco

Cisco TelePresence System Codec C60 Bedienungsanleitung

Cisco

Cisco Telepresence MX800 Bedienungsanleitung

Cisco

Cisco CTS-3010 Bedienungsanleitung

Cisco

Cisco TelePresence SX20 Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung