Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module... Installations- und Betriebshandbuch

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Catalyst 6500 Series Distributed Forwarding

Card 4 for WS-X68xx, WS-X69xx, and Select

WS-X67xx Modules Installation Note

Revised: January 2014

Product numbers:

This publication contains the procedures for installing and removing the Distributed Forwarding Card 4

(DFC4) daughter card on the WS-X67xx Ethernet modules that support the DFC4.

Note Throughout this publication, unless otherwise noted, the term DFC4 daughter card refers to the DFC4-A,

DFC4-AXL, DFC4-E, and DFC4-EXL daughter cards.

Contents

This publication contains these sections:

•Overview, page 2

•Required Tools and Parts, page 3

•Safety Overview, page 4

•Removing a CFC or DFC3 Daughter Card, page 10

•Removing a DFC4 Daughter Card, page 18

•Installing a DFC4 Daughter Card, page 23

WS-F6K-DFC4-A(=) WS-F6K-DFC4-AXL(=)

WS-F6K-DFC4-E(=) WS-F6K-DFC4-EXL(=)

Catalyst 6500 Series Distributed Forwarding Card 4 for WS-X68xx, WS-X69xx, and Select WS-X67xx Modules Installation Note

OL-24918-02

Overview

•Removing and Installing Ethernet Modules in the Chassis, page 28

•Obtaining Documentation and Submitting a Service Request, page 36

Overview

This section provides an overview and specifications of the DFC daughter cards. The DFC4 daughter

card is shipped factory-installed on the WS-X69xx and the WS-X68xx series line cards (except for the

WS-X6816-GBIC Ethernet module). Table 1 lists the WS-X68xx and the WS-X69xx Ethernet modules

that ship with the DFC4 daughter cards. Certain WS-X67xx Ethernet modules can also be upgraded with

the DFC4 daughter card. Table 2 lists the WS-X67xx Ethernet modules that can be upgraded in the field

with the DFC4 daughter card.

Note Modules that are equipped with DFC4 daughter cards are only supported by the Supervisor Engine 2T

with Cisco IOS software release 12.2(50)SY or later.

Table 1 DFC4 Daughter Card Usage and Support on WS-X69xx and WS-X68xx Ethernet Modules

Base Ethernet

Module

DFC Daughter Card Installed Upgrade Information

WS-X6904-40G WS-F6K-DFC4-E (module is labeled

WS-X6904-40G-2T)

WS-F6K-DFC4-EXL (module is labeled

WS-X6904-40G-2TXL)

The WS-X6904-40G module cannot be upgraded.

WS-X6908-10G WS-F6K-DFC4-E (module is labeled

WS-X6908-10G-2T)

WS-F6K-DFC4-EXL (module is labeled

WS-X6908-10G-2TXL)

The WS-X6908-10G module cannot be upgraded.

WS-X6824-SFP WS-F6K-DFC4-A (module is labeled

WS-X6824-SFP-2T)

WS-F6K-DFC4-AXL (module is labeled

WS-X6824-SFP-2TXL)

The WS-X6824-SFP module cannot be upgraded.

WS-X6848-SFP WS-F6K-DFC4-A (module is labeled

WS-X6848-SFP-2T)

WS-F6K-DFC4-AXL (Module is labeled

WS-X6848-SFP-2TXL)

The WS-X6848-SFP module cannot be upgraded.

WS-X6848-GE-TX WS-F6K-DFC4-A (module is labeled

WS-X6848-TX-2T)

WS-F6K-DFC4-AXL (module is labeled

WS-X6848-TX-2TXL)

The WS-X6848-TX module cannot be upgraded.

Catalyst 6500 Series Distributed Forwarding Card 4 for WS-X68xx, WS-X69xx, and Select WS-X67xx Modules Installation Note

OL-24918-02

Required Tools and Parts

These parts are included in the DFC4 daughter card kit:

•DFC4-A, DFC4-AXL, DFC4-E, or DFC4-EXL daughter card

•One disposable grounding wrist strap

These tools and supplies are required to remove and install the DFC4 daughter card:

•Antistatic mat to support the removed module and an antistatic bag to store the removed DFC

daughter card

•Your own ESD-prevention equipment or the disposable grounding wrist strap included in the

upgrade kit

•Number 1 Phillips-head screwdriver for the DFC daughter card installation hardware

WS-X6816-10GE WS-F6K-DFC4-E (module is labeled

WS-X6816-10G-2T)

WS-F6K-DFC4-EXL (module is labeled

WS-X6816-10G-2TXL)

The WS-X6816-10G module cannot be upgraded.

WS-X6816-10T WS-F6K-DFC4-E (module is labeled

WS-X6816-10T-2T)

WS-F6K-DFC4-EXL (module is labeled

WS-X6816-10T-2TXL)

The WS-X6816-10T module cannot be upgraded.

Table 2 WS-X67xx Ethernet Modules that support the DFC4 Daughter Card Upgrade

Base Ethernet

Module

DFC Daughter Card Installed Upgrade Information

WS-X6724-SFP CFC, DFC3A, DFC3B, DFC3BXL,

DFC3C, or DFC3XL

Can be upgraded with either a WS-F6K-DFC4-A or a

WS-F6K-DFC4-AXL

WS-X6748-SFP CFC, DFC3A, DFC3B, DFC3BXL,

DFC3C, or DFC3XL

Can be upgraded with either a WS-F6K-DFC4-A or a

WS-F6K-DFC4-AXL

WS-X6716-10GE DFC3A, DFC3B, DFC3BXL, DFC3C, or

DFC3XL

Can be upgraded with either a WS-F6K-DFC4-E or a

WS-F6K-DFC4-EXL

WS-X6748-GE-TX DFC3A, DFC3B, DFC3BXL, DFC3C, or

DFC3XL

Can be upgraded with either a WS-F6K-DFC4-A or a

WS-F6K-DFC4-AXL

WS-X6716-10T DFC3A, DFC3B, DFC3BXL, DFC3C, or

DFC3XL

Can be upgraded with either a WS-F6K-DFC4-E or a

WS-F6K-DFC4-EXL

WS-X6704-10GE DFC3A, DFC3B, DFC3BXL, DFC3C, or

DFC3XL

Can be upgraded with either a WS-F6K-DFC4-A or a

WS-F6K-DFC4-AXL

Table 1 DFC4 Daughter Card Usage and Support on WS-X69xx and WS-X68xx Ethernet Modules

Base Ethernet

Module

DFC Daughter Card Installed Upgrade Information

Catalyst 6500 Series Distributed Forwarding Card 4 for WS-X68xx, WS-X69xx, and Select WS-X67xx Modules Installation Note

OL-24918-02

Safety Overview

Safety warnings appear throughout this publication in procedures that may harm you if performed

incorrectly. A warning symbol precedes each warning statement.

Statement 1071—Warning Definition

Warning

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you

work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar

with standard practices for preventing accidents. Use the statement number provided at the end of

each warning to locate its translation in the translated safety warnings that accompanied this

device.

SAVE THESE INSTRUCTIONS

Waarschuwing

BELANGRIJKE VEILIGHEIDSINSTRUCTIES

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan

veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij

elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard

praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de

waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt

raadplegen.

BEWAAR DEZE INSTRUCTIES

Varoitus

TÄRKEITÄ TURVALLISUUSOHJEITA

Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin

käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu

onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen

mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien

lausuntonumeroiden avulla.

SÄILYTÄ NÄMÄ OHJEET

Attention

IMPORTANTES INFORMATIONS DE SÉCURITÉ

Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant

entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez

conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures

couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des

avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil,

référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.

CONSERVEZ CES INFORMATIONS

Catalyst 6500 Series Distributed Forwarding Card 4 for WS-X68xx, WS-X69xx, and Select WS-X67xx Modules Installation Note

OL-24918-02

Safety Overview

Warnung

WICHTIGE SICHERHEITSHINWEISE

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen

kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und

den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder

Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten

Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.

BEWAHREN SIE DIESE HINWEISE GUT AUF.

Avvertenza

IMPORTANTI ISTRUZIONI SULLA SICUREZZA

Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle

persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli

relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti.

Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le

traduzioni delle avvertenze riportate in questo documento.

CONSERVARE QUESTE ISTRUZIONI

Advarsel

VIKTIGE SIKKERHETSINSTRUKSJONER

Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du

begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med

elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten

av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne

enheten.

TA VARE PÅ DISSE INSTRUKSJONENE

Aviso

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de

lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos

perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de

prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para

localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.

GUARDE ESTAS INSTRUÇÕES

¡Advertencia!

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular

cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los

procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el

número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña

a este dispositivo.

GUARDE ESTAS INSTRUCCIONES

Catalyst 6500 Series Distributed Forwarding Card 4 for WS-X68xx, WS-X69xx, and Select WS-X67xx Modules Installation Note

OL-24918-02

Safety Overview

Varning!

VIKTIGA SÄKERHETSANVISNINGAR

Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada.

Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och

känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av

varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna

anordning.

SPARA DESSA ANVISNINGAR

Catalyst 6500 Series Distributed Forwarding Card 4 for WS-X68xx, WS-X69xx, and Select WS-X67xx Modules Installation Note

OL-24918-02

Safety Overview

Aviso

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões

corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os

circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o

número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de

segurança traduzidos que acompanham o dispositivo.

GUARDE ESTAS INSTRUÇÕES

Advarsel

VIGTIGE SIKKERHEDSANVISNINGER

Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for

legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de

involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til

undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de

oversatte advarsler, der fulgte med denne enhed.

GEM DISSE ANVISNINGER

Catalyst 6500 Series Distributed Forwarding Card 4 for WS-X68xx, WS-X69xx, and Select WS-X67xx Modules Installation Note

OL-24918-02

Safety Overview

Catalyst 6500 Series Distributed Forwarding Card 4 for WS-X68xx, WS-X69xx, and Select WS-X67xx Modules Installation Note

OL-24918-02

Safety Overview

Warning

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Statement 1030

Warning

Hazardous voltage or energy is present on the backplane when the system is operating. Use caution

when servicing.

Statement 1034

Catalyst 6500 Series Distributed Forwarding Card 4 for WS-X68xx, WS-X69xx, and Select WS-X67xx Modules Installation Note

OL-24918-02

Removing a CFC or DFC3 Daughter Card

If you are upgrading one of the WS-X67xx Ethernet modules listed in Table 2 with a DFC4 daughter

card, you must remove the CFC or the DFC3 daughter card before installing the new DFC4 daughter

card. The following two procedures are provided:

•Removing the CFC Daughter Card, page 10

•Removing the DFC3 Daughter Card, page 14

Note Once you have replaced the DFC3 daughter card with a DFC4 daughter card, the module will only

operate with the Supervisor Engine 2T.

Removing the CFC Daughter Card

If your WS-X67xx Ethernet module is equipped with a CFC daughter card, you must remove it before

you install the DFC4 daughter card.

Warning

During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly

touch the backplane with your hand or any metal tool, or you could shock yourself.

Statement 94

To remove a CFC daughter card, follow these steps:

Step 1 Attach an ESD grounding strap to your wrist and to ground.

Step 2 Remove the Ethernet module from the Catalyst 6500 series switch.

If you are unsure about the correct procedure for removing a module from the switch chassis, refer to

the “Removing and Installing Ethernet Modules in the Chassis” section on page 28 for removal

instructions.

Step 3 Place the Ethernet module on an antistatic mat with the front of the module facing toward you.

Andere Handbücher für 6500 - Catalyst Series 10 Gigabit EN Interface Module...

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Netzwerkkarte Handbücher

Cisco

Cisco WAN Interface Cards Cable WIC-1B-U Bedienungsanleitung

Cisco

Cisco Aironet 340 Series Bedienungsanleitung

Cisco

Cisco uBR10-LCP2-MC28C Bedienungsanleitung

Cisco

Cisco Linksys USB200M Bedienungsanleitung

Cisco

Cisco Media Gateway Controller Node Manager Bedienungsanleitung

Cisco

Cisco CE-100T-8 Bedienungsanleitung

Cisco

Cisco 7304 Series Bedienungs- und Wartungsanleitung

Cisco

Cisco uBR-E-16U Bedienungsanleitung

Cisco

Cisco uBR10-MC5X20H Bedienungsanleitung

Cisco

Cisco DFC3A Installations- und Betriebshandbuch

Cisco

Cisco PA-T3 Bedienungs- und Wartungsanleitung

Cisco

Cisco HWIC-4ESW - EtherSwitch HWIC Switch Bedienungsanleitung

Cisco

Cisco EHWIC 1 GE-SFP-CU Bedienungsanleitung

Cisco

Cisco VWIC-2MFT-T1 - Multiflex Trunk Voice/WAN Interface Card Expansion... Bedienungsanleitung

Cisco

Cisco DFC3B Installations- und Betriebshandbuch

Cisco

Cisco WUSB100 Bedienungsanleitung

Cisco

Cisco ASR 9000 Series Bedienungsanleitung

Cisco

Cisco Catalyst 4500 Series Anleitung zur Verwendung

Cisco

Cisco WEC600N Bedienungsanleitung

Cisco

Cisco PA-FE-FX Bedienerhandbuch

Cisco

Cisco IDTA153 Bedienungsanleitung

Cisco

Cisco PA-POS-1OC3 Bedienerhandbuch

Cisco

Cisco PA-4C-E 1 Bedienerhandbuch

Cisco

Cisco CTX2500 Bedienungsanleitung

Beliebte Netzwerkkarte Handbücher anderer Marken

FirstComm

FirstComm OBiWiFi5G Bedienungsanleitung

Sun Microsystems

Sun Microsystems Interface Adapter Bedienungsanleitung

TRENDnet

TRENDnet TU2-ETG Bedienungsanleitung

YASKAWA

YASKAWA SI-EN3 Bedienungsanleitung

Paradyne

Paradyne BitStorm 2600 IP DSLAM Bedienungsanleitung

Belkin

Belkin F5D7050 Bedienungsanleitung

3Com

3Com EtherLink 3C509B Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITX Bedienungsanleitung

Delta Electronics

Delta Electronics Braking Modules VFDB Series Bedienungsanleitung

TwinMOS

TwinMOS Booming Bedienungsanleitung

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Bedienungsanleitung

Buffalo

Buffalo AirStation WLI-PCM-L11GP Bedienungsanleitung

National Instruments

National Instruments NI 9234 Bedienungsanleitung

Hama

Hama 49276 Bedienungsanleitung

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Bedienungsanleitung

Compaq

Compaq Wireless LAN 100 Bedienungsanleitung

Bose

Bose PowerMatch Dante Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITXR Bedienungsanleitung