Cisco Aironet 340 Series Bedienungsanleitung

TAKE OUT WHAT YOU NEED

INSERT THE CLIENT ADAPTER

INSTALL THE APPROPRIATE DRIVER

INSTALL THE CLIENT UTILITIES

Quick Start Guide

CISCO AIRONET WIRELESS LAN ADAPTERS

340 AND 350 SERIES

Access Point

Laptop with

PC card

client adapter

PC with PCI

client adapter

47517

Take Out What You Need

If any item is missing or damaged, contact your Cisco representative or reseller for support.Any

remote antenna and its associated wiring are shipped separately.

Additional Requirements

• A computing device equipped with a Type II or Type III PC card slot or a desktop personal

computer equipped with an empty PCI expansion slot

Note All drivers and supporting software (card and socket services) for the PC card slot

must be loaded and configured.

• A Phillips screwdriver (for PCI client adapter)

• Windows NT Service Pack 3 or greater if your computer is running Windows NT

• The following information from your system administrator:

—Your wireless client name

—The protocols necessary to bind to the client adapter

—The case-sensitive service set identifier (SSID) for your radio frequency (RF) network

—If you are not connected to a DHCP server, the IP address, broadcast address (if you

are using Linux), subnet mask, and default gateway address of your computer

—The username and password for your network account

Cisco Aironet PC Card Client Adapter or

Cisco Aironet PCI Client Adapter

Standard 2-dBi dipole antenna (for PCI client adapter)

Cisco Aironet Series Wireless LAN Adapters CD

with software and product documentation

CISCO AIRONET 340

SERIES

11MbpsWIRELESSLANADAPTER

PC card

client adapter

47519

PCI client

adapter

47518

Note Ifyou are running Windows 95, 98, NT, or 2000 and a Cisco Aironet client adapter was

previously installed on your computer with the 6.10 driver, you must remove this driver before

you can insert your new client adapter and install its more recent driver. Refer to the Cisco

Aironet Wireless LAN Adapters Hardware Installation Guide for information on uninstalling

the 6.10 driver.

Note If you are running Windows 95, you must copy the self-extracting Win95Driver.exe file

from the Win95 directory on the CD provided to afloppy disk or a directory on your hard drive

and extract the files before inserting your client adapter. Refer to the Cisco Aironet Wireless

LAN Adapters Hardware Installation Guide for instructions on installing the driver.

Caution Theseprocedures and the physical connectionsthey describe apply generally

to conventional PC card slots and PCI expansion slots. In cases of custom or

nonconventional equipment, be alert to possible differences in PC card slot and PCI

expansion slot configurations.

Insert the Client Adapter

Insert the PC Card Client

Adapter

1Before you begin, examine the PC card

client adapter. One end has a dual-row,

68-pin PC card connector. The card is

keyed so it can be inserted only one way

into the PC card slot.

Note The slot is on the left or right side of

the computer, depending on the model.

2Turn on the computer before inserting

the PC card, unless you are running

Windows NT. For Windows NT, turn

off thecomputer before inserting thePC

card.

Caution Never force the PC card

into a PC card slot. Forcing it will

damage both the card and the slot.

If the PC card does not insert easily,

remove the card and re-insert it.

3Hold the PC card with the Cisco logo

facing up and insert it into the PC card

slot, applying just enough pressure to

make sure it is fully seated.

4Proceed to the driver installation

instructions for your operating system.

Insert the PCI Client Adapter

Antenna

connector

LEDs Card edge

connector

Standard 2 dBi

dipole antenna

47521

1Turn off the PC and all its components.

2Remove the computer cover.

Note On most Pentium PCs, PCI

expansion slots are white. Refer to your PC

documentation for slot identification.

3Remove the screw from the top of the

CPU back panel above an empty PCI

expansion slot. This screw holds the

metal bracket on the back panel.

Caution Static electricity can

damage your client adapter. Before

removing the adapter from the

anti-static packaging, discharge

static by touching a metal part of a

grounded PC.

4Tilt the adapter to allow the antenna

connector and LEDs to slip through the

opening in the CPU back panel.

5Press the client adapter into the empty

slot until the connector is firmly seated.

Caution Do not force the adapter

into theexpansion slot as this could

damage both the adapter and the

slot. If the adapter does not insert

easily, remove the adapter and

re-insert it.

6Re-install the screw on the CPU back

panel and replace the computer cover.

7Attach the 2-dBi antenna to the

adapter’s antenna connector until it is

finger-tight. Do not overtighten.

8For optimal reception, position the

antenna so it is straight up.

9Proceed to the driver installation

instructions for your operating system.

This section provides installation instructions for the Windows 98 and Windows 2000 drivers.

If your computer is using a Windows 95, Windows NT, Windows Me, Windows CE, Linux, or

Macintosh operating system, refer to the Cisco Aironet Wireless LAN Adapters Hardware

Installation Guide for driver installation instructions. This guide can be accessed from the CD

provided or from Cisco’s web site at http://www.cisco.com/univercd/cc/td/doc/product/

wireless.

Note The following procedures assume you are installing the driver from the CD provided. If

your computer does not have a CD-ROM drive, download the driver from Cisco’s web site at

http://www.cisco.com/public/sw-center/sw-wireless.shtml. Under “Wireless Software

Products - Cisco Aironet Drivers and Utilities,”select your computer’s operating system

and the appropriate driver.

Windows 98 Systems

After you install the client adapter, the system detects it and opens the New Hardware Found

window.

1When the Add New Hardware Wizard window opens, click Next.

2When the next dialog box opens, select Search for the best driver for your device

(Recommended) and click Next.

3Select CD-ROM drive, deselect all other options, insert the Cisco Aironet Series Wireless

LAN Adapters CD into your computer’s CD-ROM drive, and click Next.

4When the client adapter driver is displayed, click Next to copy the files.

5If you are prompted to enter a path to the Windows 98 operating system files, do one of

the following:

—If the Windows 98 operating system files are installed on your computer, they should

be in the C:\Windows\Options\Cabs folder. Enter this path in the Copy files from

dialog box and click OK.

—If the system prompts you for the Windows 98 operating system CD, insert this CD

into your CD-ROM drive, enter D:\WIN98 (where Dis your CD-ROM drive) in the

Copy files from dialog box, and click OK.

Install the Appropriate Driver

6The Add New Hardware Wizard

window re-opens indicating that the

installation is complete. Click Finish.

7When prompted to restart your

computer, remove the CD and click Yes.

8When the computer restarts,

double-click My Computer, Control

Panel, and Network.

9Select the Cisco Systems wireless LAN

adapter and click Properties.

10 In the Properties window, click the

Advanced tab.

11 In the Advanced window, select Client

Name and enter your computer’s

unique client name in the Value dialog

box.

12 Select SSID and enter your RF

network’s case-sensitive SSID in the

Value dialog box. Click OK.

13 If you are not connected to a DHCP

server, follow these steps:

(a) Double-click My Computer,

Control Panel, and Network.

(b) Click the Protocols tab and select

TCP/IP and Properties.

enter the IP address, subnet mask,

and defaultgatewayaddress ofyour

computer, which can be obtained

from your system administrator.

Click OK.

(d) In the Network window, click OK.

14 When prompted to restart your

computer, click Yes.

Windows 2000 Systems

After you install the client adapter, the

systemdetectsitandbrieflyopenstheFound

New Hardware window.

The Found New Hardware Wizard window

opens andindicates thatthe wizard willhelp

you to install the driver.

1Click Next. Another window opens and

asks what you want the wizard to do.

2SelectSearch for asuitable driver for my

device (recommended) and click Next.

3Select CD-ROM drives, deselect all

other options, insert the Cisco Aironet

Series Wireless LAN Adapters CD into

your computer’s CD-ROM drive, and

click Next.

The wizard finds the installation files on

the CD and displays the search results.

4When the client adapter driver is

displayed, click Next to copy the

required files.

5When you receive a message indicating that Windows has finished the installation, click

Finish.

6Remove the CD from your computer’s CD-ROM drive.

7Double-click My Computer, Control Panel, and System.

8In the System Properties window, click the Hardware tab.

9Click Device Manager.

10 In the Device Manager window, double-click Network Adapters.

11 Right-click the Cisco Systems wireless LAN adapter.

12 Click Properties.

13 In the Properties window, click the Advanced tab.

14 In the Advanced window, select Client Name and enter your computer’s unique client name

in the Value dialog box.

15 Select SSID and enter your RF network’s case-sensitive SSID in the Value dialog box. Click

OK.

16 If you are not connected to a DHCP server, follow these steps:

(a) Double-click My Computer, Control Panel, and Network and Dial-up Connections.

(b) Right-click Local Area Connection.

(d) Click Use the following IP address and enter the IP address, subnet mask, and default

gateway address of your computer, which can be obtained from your system

administrator. Click OK.

(e) In the Local Area Connection Properties window, click OK.

17 If you are prompted to restart your computer, click Yes.

This section provides installation instructions for the client utilities for Windows 95, 98, NT,

2000, and Me. If your computer is using a Windows CE, Linux, or Macintosh operating

system, refer to the Cisco Aironet Wireless LAN Adapters Hardware Installation Guide for

information.

After you have installed the appropriate driver for your computer’s operating system, you can

install the Aironet Client Utility (ACU), Link Status Meter (LSM), and Client Encryption

Manager (CEM) utilities. ACU enables you to configure the client adapter, enable server-based

authentication, and enable the Wired Encryption Privacy (WEP) feature; LSM provides

troubleshooting and status information; and CEM enables you to set one or more WEP keys

for your client adapter.

Install the Client Utilities

1Close any open Windows programs.

2Insert the Cisco Aironet Series

Wireless LAN Adapters CD into your

computer’s CD-ROM drive.

3Select Start > Run and enter the

following path (where Dis the letter of

your CD-ROM drive): D:\Utilities\

ACU\setup.exe.

4At the Welcome screen, click Next.

5In the Authentication Method screen,

select the server-based authentication

method preferred for wireless network

access in your location and click Next:

—If you select None, server-based

authentication is not enabled for

your client adapter. After the client

utilities are installed, you can elect

not to implement any security

features, or you can activate some

level of security by using WEP keys.

—If you select LEAP, LEAP isenabled

on your client adapter, provided an

EAP-enabled RADIUS server is

running on your network. After

LEAPis enabled andyourcomputer

is rebooted, your client adapter

authenticates to the RADIUS server

using your network logon and

receives a session-based WEP key.

—If you select EAP,EAPis enabledon

your client adapter, provided an

EAP-enabled RADIUS server is

running on your network. If your

computer is not using an operating

system with built-in EAP support,

this option is not available. After

EAP is enabled and your computer

is rebooted, your client adapter

authenticates to the RADIUS server

using your network logon and

receives a session-based WEP key.

6In the Select Components screen, make sure the client utilities that you want to install are

selected and any that you do not want to install are deselected. Click Next.

7In the Select Program Folder screen, click Next to allow icons for the client utilities to be

placed in the Cisco Systems, Inc. folder.

8In the Setup Complete screen, perform one of the following:

—If you selected no server-based authentication in Step 5, select Launch the Aironet

Client Utility and click Finish. ACU opens so you can configure your client adapter. If

you set a WEP key in CEM and enable WEP using ACU, the WEP key must match the

number and value of the WEP key used by the Access Point.

—If you selected LEAP or EAP server-based authentication in Step 5, select Yes, I want

to restart my computer now, remove the CD from your computer’s CD-ROM drive,

and click Finish. When the computer reboots, enter your username and password at

the network logon screen. The client adapter will be authenticated and assigned a

session-based WEP key, provided your client adapter is configured to associate to an

EAP-enabled Access Point.

9Refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide for

instructions on how to use each utility.

Note To install and use the client utilities on Windows NT or Windows 2000 systems, you

must log onto the system asa user with administrative privileges. The utilities do not install

or operate correctly for users not logged in with administrative rights.

Safety Information for the Cisco Aironet Wireless LAN Adapters

The Federal Communications Commission (FCC) with its action in ET Docket 96-8 has

adopted a safety standard for human exposure to RF electromagnetic energy emitted by FCC

certified equipment. Cisco Aironet 340 and 350 series products meet the uncontrolled

environmental limits found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio

according to the instructions found in this manual and the hardware and software guides on

the Cisco Aironet Series Wireless LAN Adapters CD will result in user exposure that is

substantially below the FCC recommended limits.

•Do not touch or move the antenna(s) while the unit is transmitting or receiving.

•Do not hold any component containing a radio such that the antenna is very close to or

touching any exposed parts of the body, especially the face or eyes, while transmitting.

Andere Handbücher für Aironet 340 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Netzwerkkarte Handbücher

Cisco

Cisco uBR10-MC5X20H Bedienungsanleitung

Cisco

Cisco ONS 15454 Series Bedienungsanleitung

Cisco

Cisco uBR-MC28U Bedienungsanleitung

Cisco

Cisco WAN Interface Card Cable WIC-1DSU-T1 Bedienungsanleitung

Cisco

Cisco Catalyst 4500 Series Handbuch

Cisco

Cisco ONS 15310-MA Bedienungsanleitung

Cisco

Cisco WAN Interface Card WIC-1DSU-56K4 Bedienungsanleitung

Cisco

Cisco 7304 Series Bedienungs- und Wartungsanleitung

Cisco

Cisco LINKSYS WUSB54GR Bedienungsanleitung

Cisco

Cisco uBR10-SRP-OC12SML Bedienungsanleitung

Cisco

Cisco Linksys WUSB54G Bedienungsanleitung

Cisco

Cisco EHWIC-4SHDSL-EA Merkblatt

Cisco

Cisco PA-FE-FX Bedienerhandbuch

Cisco

Cisco Linksys PLS300 Bedienungsanleitung

Cisco

Cisco Catalyst 4500 Abmessungen

Cisco

Cisco Gigabit Switch Router Cisco 12012 Leitfaden

Cisco

Cisco Media Gateway Controller Node Manager Bedienungsanleitung

Cisco

Cisco 12000 - Series Chassis Modular Expansion... Bedienungs- und Wartungsanleitung

Cisco

Cisco WUSB54GSC Bedienungsanleitung

Cisco

Cisco WPC600N - Ultra RangePlus Wireless-N PC Card Bedienungsanleitung

Cisco

Cisco WAE-674-K9 - Wide Area Application Engine... Bedienungsanleitung

Cisco

Cisco 7300-6T3 Bedienerhandbuch

Cisco

Cisco DFC3B Installations- und Betriebshandbuch

Cisco

Cisco PA-T3 Bedienungs- und Wartungsanleitung

Beliebte Netzwerkkarte Handbücher anderer Marken

FirstComm

FirstComm OBiWiFi5G Bedienungsanleitung

Sun Microsystems

Sun Microsystems Interface Adapter Bedienungsanleitung

TRENDnet

TRENDnet TU2-ETG Bedienungsanleitung

YASKAWA

YASKAWA SI-EN3 Bedienungsanleitung

Paradyne

Paradyne BitStorm 2600 IP DSLAM Bedienungsanleitung

Belkin

Belkin F5D7050 Bedienungsanleitung

3Com

3Com EtherLink 3C509B Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITX Bedienungsanleitung

Delta Electronics

Delta Electronics Braking Modules VFDB Series Bedienungsanleitung

TwinMOS

TwinMOS Booming Bedienungsanleitung

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Bedienungsanleitung

Buffalo

Buffalo AirStation WLI-PCM-L11GP Bedienungsanleitung

National Instruments

National Instruments NI 9234 Bedienungsanleitung

Bose

Bose PowerMatch Dante Bedienungsanleitung

Compaq

Compaq Wireless LAN 100 Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITXR Bedienungsanleitung

Gigafast

Gigafast EE101-AEX Bedienungsanleitung

D-Link

D-Link DHP?P309AV Bedienungsanleitung