Cisco CTM GateWay Installationsanleitung
CHAPTER
1-1
Cisco Transport Manager Release 9.1 GateWay/CORBA User Guide and Programmer Manual
OL-19364-01
1
Overview of CTM GateWay/CORBA
This chapter provides an overview of CTM GateWay/CORBA. It includes the following information:
•1.1 Features of CTM GateWay/CORBA, page 1-2
•1.2 CTM GateWay/CORBA Fault Management, page 1-3
•1.3 Overview of CORBA Services, page 1-3
•1.4 Information Model, page 1-6
•1.5 Summary, page 1-6
CTM is a highly advanced optical transport domain manager. Open interfaces to Operations Support
Systems (OSSs) using industry-standard protocols make CTM a flexible building block in legacy as well
as next-generation OSS infrastructures. The CTM GateWay/CORBA product is a CORBA northbound
interface that complies with the TMF CORBA specification for network management layer-element
management layer (NML-EML) interfaces.
A programming technology for distributed computing, CORBA enables components of various
application programs to communicate with one another regardless of their implementation
characteristics—programming language, operating system, machine, location, and so on.
CTM GateWay/CORBA allows service providers to implement a programmatic interface between CTM
and various OSS tools in the back office. Such interfaces enable next-generation flow-through equipment
and circuit management, including inventory, provisioning, and assurance functions.
For each NE that CTM manages, the CTM GateWay/CORBA option provides higher-layer management
systems with fault, inventory, and performance information, plus configuration and circuit provisioning
capabilities. CTM GateWay/CORBA supports up to eight simultaneous sessions with higher-layer
management systems.
CTM GateWay/CORBA supports the following NEs in CTM R9.1:
•MGX 8880/8850/8830
•ONS 15200
•ONS 15216
•ONS 15305
•ONS 15310 CL
•ONS 15310 MA SDH
•ONS 15310 MA SONET
•ONS 15327
•ONS 15454 SDH
1-2
Cisco Transport Manager Release 9.1 GateWay/CORBA User Guide and Programmer Manual
OL-19364-01
Chapter 1 Overview of CTM GateWay/CORBA
1.1 Features of CTM GateWay/CORBA
•ONS 15454 SONET
•ONS 15530
•ONS 15540
•ONS 15600 SDH
•ONS 15600 SONET
The following figure illustrates the CTM GateWay/CORBA communications architecture within a
service provider’s OSS environment.
Figure 1-1 CTM GateWay/CORBA Communications Architecture
The telemanagement community has adopted CORBA as the preferred distribution technology with
which to integrate the various components of an OSS. The Multi Technology Network Management
Working Group of the TMF has been working to create a specification for an NML-EML interface.
CTM GateWay/CORBA is based on the following TMF standards:
•TMF.513 v2.0 (August 2001): Multi Technology Network Management Business Agreement
•TMF.608 v2.0 (August 2001): Multi Technology Network Management Information Agreement
•TMF.814 v3.0 (August 2001): Multi Technology Network Management Solution Set
The TMF.608 document is a protocol-independent information model for the network resources being
managed. The TMF.814 document is the CORBA Interface Data Language (IDL) component of the
specification; it consists of a set of definitions for specific objects and methods that are available for use
at the NML-EML interface for passing information or accomplishing specific actions. However,
TMF.814 is a specific interface implementation based on a TMF high-level business agreement
described by the TMF.513 document. To complete the document set, TMF.814A recognizes that different
parties may provide varying degrees of compliance in their implementations. The TMF.814A document
is called the Implementation Agreement, and is simply a form to be filled out by those parties
implementing TMF.814 to further describe their specific implementations to those who might use them.
1.1 Features of CTM GateWay/CORBA
CTM GateWay/CORBA supports the following TM.814 modules:
•Inventory
–
Element management system (EMS)
–
Multilayer subnetwork
–
Managed element
Service provider's
OSS
CTM
CORBA
TCP
IP
Ethernet
10BASE-T
92909
1-3
Cisco Transport Manager Release 9.1 GateWay/CORBA User Guide and Programmer Manual
OL-19364-01
Chapter 1 Overview of CTM GateWay/CORBA
1.2 CTM GateWay/CORBA Fault Management
–
Physical termination point (PTP)
–
Connection termination point (CTP)
–
Floating termination point (FTP)
–
Subnetwork connection (SNC)
–
Protection group
–
Equipment
–
Equipment holder
–
Topological link
•Alarm notification
•Retrieval of active alarms on objects where inventory is available
•SNC provisioning
•Equipment provisioning
•Protection operations
•Performance operations
•Maintenance operations
Note Performance and inventory application programming interfaces (APIs) do not retrieve any information
for out-of-service NEs.
The gateway authenticates the northbound OSS. Once authenticated, the OSS can perform operations
and receive alarm notifications.
CTM GateWay/CORBA uses jacORB 2.1.3.7. The corresponding standard is Object Management Group
(OMG) CORBA 2.3.
1.2 CTM GateWay/CORBA Fault Management
CTM GateWay/CORBA forwards all the fault notifications received from managed NEs and all CTM
alarms to the network management system (NMS) through the notification service. Information about
the notification service is available on the OMG website at www.omg.org.
Note This website is copyright © 1997–2009, Object Management Group, Inc.
The NMS retrieves all active alarms on the EMS and on managed element objects. The NMS filters
alarms based on probable cause, perceived severity, and managed element name.
1.3 Overview of CORBA Services
CTM GateWay/CORBA uses two CORBA services—naming service and notification service. The
naming service is required for CTM GateWay/CORBA to function. If the notification service is not
available, alarm and event notifications are not forwarded to the OSS. By default, the naming and
notification services are installed on the CTM server during the GateWay/CORBA installation. However,
1-4
Cisco Transport Manager Release 9.1 GateWay/CORBA User Guide and Programmer Manual
OL-19364-01
Chapter 1 Overview of CTM GateWay/CORBA
1.3.1 Naming Service
the CORBA services can be located anywhere as long as they are accessible from the CTM server on
which CTM GateWay/CORBA is installed. The OSS application(s) must also use the same instances of
the naming service and the notification service.
1.3.1 Naming Service
CTM GateWay/CORBA and the other CTM server processes must use a naming service in order to
operate. CTM GateWay/CORBA includes the OpenFusion naming service product. By default,
CTM GateWay/CORBA is configured to use OpenFusion. However, you can configure
CTM GateWay/CORBA and the CTM server to use a different centralized naming service. For more
information, see B.6 Using Multiple Naming Servers, page B-4.
1.3.2 Notification Service
CTM GateWay/CORBA must use a CORBA notification service to report faults and events.
CTM GateWay/CORBA includes the PrismTech OpenFusion notification service product, and is
configured by default to use it. As with the naming service, you can configure CTM GateWay/CORBA
to use a different notification service. For more information, see A.1 Overview of Notifications,
page A-1.
The following scenarios describe possible configurations of the naming and notification services.
Scenario 1: Naming and Notification Services Installed on the CTM Server
The naming and notification services are installed on the CTM server workstation as shown in the
following figure.
Figure 1-2 Naming and Notification Services on the CTM Server Workstation
The notification service must be installed on the CTM server workstation with the CTM server
processes. CTM GateWay/CORBA is configured to use this notification service. The NMS processes
must be configured to use the notification and naming services on the CTM server workstation.
CTM
Server
GateWay
CORBA
Naming
Service
Notification
Service
Workstation A
LAN Communication
NMS Server
CTM Server
Workstation B
92910
1-5
Cisco Transport Manager Release 9.1 GateWay/CORBA User Guide and Programmer Manual
OL-19364-01
Chapter 1 Overview of CTM GateWay/CORBA
1.3.2 Notification Service
Scenario 2: Naming and Notification Services Installed on the NMS Workstation
The naming and notification services are installed on the NMS workstation as shown in the following
figure.
Figure 1-3 Naming and Notification Services on the NMS Workstation
The CTM server processes and CTM GateWay/CORBA must be configured to use the naming and
notification services on the NMS workstation.
CTM
Server
GateWay
CORBA
Naming
Service
Notification
Service
Workstation A
LAN
Communication
NMS Server
CTM Server
Workstation B
92911
1-6
Cisco Transport Manager Release 9.1 GateWay/CORBA User Guide and Programmer Manual
OL-19364-01
Chapter 1 Overview of CTM GateWay/CORBA
1.4 Information Model
Scenario 3: Naming and Notification Services Installed on Independent Servers
The naming and notification services are installed on independent servers as shown in the following
figure.
Figure 1-4 Naming and Notification Services on Independent Servers
The CTM server processes, CTM GateWay/CORBA, and the NMS processes must be configured to use
the naming and notification services on independent workstations.
1.4 Information Model
The information model used by the CTM GateWay/CORBA northbound interface is based on the TMF
NML-EML CORBA interface—TMF.814 v3.0. This standard is available to TMF members from the
TMF website. The information model allows the EMS to provide an abstraction layer between the EMS
and the NMS. This standard is generic and is, therefore, applicable to many different EMS and NE
implementations. Customers implementing a TMF-compliant CORBA interface between a specific NMS
and CTM must use the CTM GateWay/CORBA product, and will require specific information on what
API features are implemented and how those features should be used.
1.5 Summary
As a state-of-the-art EMS, CTM can provide a CORBA-based interface between itself and an NMS. This
functionality is provided by a separately purchasable option—CTM GateWay/CORBA.
CTM GateWay/CORBA provides a TMF-compliant CORBA interface in accordance with the TMF
NML-EML specification composed of TMF.513, TMF.608, and TMF.814. CTM GateWay/CORBA
Workstation A
NMS Server
CTM Server
CTM
Server
Centralized Naming
Service
LAN
Communications
Centralized
Notification
Service
Workstation B
Workstation C
GateWay/
CORBA
201324
1-7
Cisco Transport Manager Release 9.1 GateWay/CORBA User Guide and Programmer Manual
OL-19364-01
Chapter 1 Overview of CTM GateWay/CORBA
1.5 Summary
includes naming and notification services. Customers can use the bundled naming and notification
services or their own services in various configurations. CTM GateWay/CORBA brings the service
provider one step closer to full OSS automation.
1-8
Cisco Transport Manager Release 9.1 GateWay/CORBA User Guide and Programmer Manual
OL-19364-01
Chapter 1 Overview of CTM GateWay/CORBA
1.5 Summary
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Cisco Netzwerk-Hardware Handbücher
Cisco
Cisco NTP-E157 Stücklistenhandbuch
Cisco
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module... Bedienungsanleitung
Cisco
Cisco Gigabit Switch Router Cisco 12012 Bedienungsanleitung
Cisco
Cisco ONS 15454 Bedienungsanleitung
Cisco
Cisco Meraki Catalyst 9300/X/L-M Series Bedienungsanleitung
Cisco
Cisco TELEPRESENCE MCU ACCESSING CONFERENCES - Bedienungsanleitung
Cisco
Cisco Catalyst 8300 Series Handbuch
Cisco
Cisco 8011-2X2XP4L Handbuch
Cisco
Cisco ONS 15454 DWDM Bedienungsanleitung
Cisco
Cisco Aironet 340 Series Bedienungsanleitung
Cisco
Cisco NSS4100 - Gigabit Storage System Bedienungsanleitung
Cisco
Cisco NCS 1010 Merkblatt
Cisco
Cisco NCS 1004 Bedienungsanleitung
Cisco
Cisco IDS-4230-FE - Intrusion Detection Sys Fast Ethernet... Bedienerhandbuch
Cisco
Cisco WBPN Bedienungsanleitung
Cisco
Cisco NCS 1001 Leitfaden
Cisco
Cisco 3660 Series Bedienungsanleitung
Cisco
Cisco NCS 2000 series Bedienungsanleitung
Cisco
Cisco ONS 15454 Series Handbuch
Cisco
Cisco ON100 Network Agent Bedienungsanleitung
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
