Cisco UCS 5100 Kurzanleitung

Unified Computing System KVM Console Access

to Blade Server Configuration Example

Document ID: 110435

Contents

Introduction

Prerequisites

Requirements

Components Used

Network Diagram

Conventions

Configure

UCS Manager GUI

UCS Manager CLI

Verify

Troubleshoot

Related Information

Introduction

The KVM console is a video over IP representation of the video output on the blade. The KVM console

access to server blades in Cisco UCS is conceptually similar to any industry standard KVM console access to

the blade. This configuration example describes how to access the KVM console from the blade view via the

Unified Computing System (UCS) Manager. Additionally, once the server profile association is complete, you

can access the same KVM console from the Server Profile view as well. The KVM console service is

provided by the blade's BMC and can be accessed via the external IP address only (that is, a pool of external

routable addresses).

In order to use the KVM console to access the blade server, a pool of IP addresses is assigned as a

management interface into the server blades. These IP addresses represent the KVM console access. Note that

these IP addresses need to be externally routable for remote access to the servers via the KVM console.

This configuration example describes how to configure KVM console access to the blade in the Cisco UCS

environment via these methods:

UCS Manager GUI• UCS Manager CLI•

Prerequisites

Requirements

Cisco recommends that you:

Have a working knowledge of Cisco UCS server blade software and hardware.• Be familiar with the UCS management application.• Understand the impact and implications of the different commands described in this document.• Be familiar with the UCS components and topology. Refer to the Network Diagram for a typical

solution.

•

Components Used

The information in this document is based on the Cisco Unified Computing System.

The information in this document was created from the devices in a specific lab environment. All of the

devices used in this document started with a cleared (default) configuration. If your network is live, make sure

that you understand the potential impact of any command.

Network Diagram

A typical Cisco UCS topology is similar to this network diagram:

Conventions

Refer to the Cisco Technical Tips Conventions for more information on document conventions.

Configure

In this section, you are presented with the information to configure the features described in this document.

UCS Manager GUI

Complete these steps in order to use the UCS GUI to configure KVM console access to the blade server:

In the navigation pane, click the Admin tab.1. Expand Communication Services, and choose Management IP Pool (ext−mgmt).2. Click Create Block of IP Addresses.3.

Enter the appropriate information in order to create the block of IP addresses, and then click OK.

Note: The IP addresses in the block must be routable outside.

UCS Manager CLI

Complete these steps in order to use the UCS CLI to configure KVM console access to the blade server:

Enter org mode.1. Enter ip−pool and then ext−mgmt mode.2. Enter the pool ip address block.3. Commit transaction.

Power−A

Power−A#

Power−A#scope org

Power−A /org #scope ip−pool ext−mgmt

Power−A /org/ip−pool #scope pooled 10.193.35.200

Power−A /org/ip−pool/pooled #commit−buffer

Power−A /org/ip−pool/pooled #

Power−A /org/ip−pool/pooled #show detail

Pooled:

IP Address: 10.193.35.200

Subnet: 255.255.255.0

Def Gw: 10.193.35.1

Assigned: Yes

Assigned To: sys/chassis−1/blade−2/mgmt/ipv4−pooled−addr

Power−A /org/ip−pool/pooled #

Verify

Complete these steps in order to verify KVM console access has been configured correctly:

In the navigation pane, click the Equipment tab.1. Expand any chassis on which the blade is installed.2. Expand the Servers tab.3. Select the blade server.4. Click the General tab, and then click KVM Console.

The KVM console should successfully connect to the blade server as shown in this image:

Troubleshoot

There is currently no specific troubleshooting information available for this configuration.

Related Information

Technical Support & Documentation − Cisco Systems•

Contacts & Feedback | Help | Site Map

Cisco Systems, Inc.

Updated: Apr 28, 2010 Document ID: 110435

Andere Handbücher für UCS 5100

Inhaltsverzeichnis

Andere Cisco Server Handbücher

Cisco

Cisco Firepower 2100 Series Handbuch

Cisco

Cisco TelePresence Server 7010 Referenzhandbuch

Cisco

Cisco NAC-3300 Series Bedienungsanleitung

Cisco

Cisco Content Delivery Engine CDE100 Handbuch

Cisco

Cisco UCS Bedienungsanleitung

Cisco

Cisco IE-3000-8TC Bedienungsanleitung

Cisco

Cisco UCS C24 Montage- und Wartungsanleitung

Cisco

Cisco 1600 Bedienungsanleitung

Cisco

Cisco UCS C480 M5 Montageanleitung

Cisco

Cisco C880 M5 Bedienungsanleitung

Cisco

Cisco SNS-3415 series Bedienungsanleitung

Cisco

Cisco UCS E Series Handbuch

Cisco

Cisco C880 Series Montageanleitung

Cisco

Cisco UCS C3160 Montage- und Wartungsanleitung

Cisco

Cisco UCS C Series Montageanleitung

Cisco

Cisco UCS E Series Bedienungsanleitung

Cisco

Cisco UCS B440 Handbuch

Cisco

Cisco 5100 Bedienungsanleitung

Cisco

Cisco TelePresence Bedienungsanleitung

Cisco

Cisco SCE 8000 10GBE Bedienungsanleitung

Cisco

Cisco ACE-4710-1F-K9 Bedienungsanleitung

Cisco

Cisco UCS C3160 Montage- und Wartungsanleitung

Cisco

Cisco UCS C220 M4 Kurzanleitung

Cisco

Cisco UCS C22 Montage- und Wartungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung