Cisco UCS B440-M1 Kurzanleitung

Configure BIOS Policy for Cisco UCS

Document ID: 112034

Contents

Introduction

Prerequisites

Requirements

Components Used

Conventions

Background Information

Configure

Network Diagram

BIOS Policy Configuration

Create a BIOS Policy

Associate the BIOS Policy to a Service Profile

Troubleshoot

Related Information

Introduction

This document explains how to configure the BIOS policy in Cisco UCS manager. The BIOS policy feature in

Cisco UCS automates the BIOS configuration process.

The traditional method of setting the BIOS is manual and often error−prone. By creating a BIOS policy and

assigning the policy to a server or group of servers, you have the transparency in BIOS settings and

configuration.

Prerequisites

Requirements

Cisco recommends that you:

Have a working knowledge of Cisco UCS Server Blade software and hardware.• Be familiar with Cisco UCS components and topology.• Be familiar with Cisco UCS Manager version 1.3.•

Components Used

The information in this document is based on these software and hardware versions:

Cisco UCS B440−M1 Blade Server• Cisco UCS Manager version 1.3•

The information in this document was created from the devices in a specific lab environment. All of the

devices used in this document started with a cleared (default) configuration. If your network is live, make sure

that you understand the potential impact of any command.

Conventions

Refer to the Cisco Technical Tips Conventions for more information on document conventions.

Background Information

BIOS policy is a policy that automates the configuration of BIOS settings. You can create one or more BIOS

policies which contain a specific grouping of BIOS settings that match the needs of a server or set of servers.

If you do not specify a BIOS policy for a server, the default BIOS settings are applied to the server. However,

these default BIOS settings can themselves be configured as per need. If a BIOS policy is specified, the policy

takes precedence over the BIOS default settings.

Any change made to the default BIOS settings does not affect a server that has a BIOS policy associated with

it because the BIOS policy takes precedence over the default BIOS settings. However, in the BIOS policy, if

the user leaves the value as platform−default, the UCS manager refers to that particular platforms BIOS

defaults (Servers > Policies > BIOS Defaults), and uses the value specified in the BIOS defaults.

In such cases it is possible for a user to achieve the usage of both BIOS policy and BIOS defaults. This is

required because some users might want to customize only a few settings in policy, and use BIOS default

values for the rest of the settings.

For example, if the user creates a BIOS policy 'test−policy' and specifies these values:

'disabled' for Turbo boost• 'platform−default' for Hyper Threading•

And the BIOS defaults for the platform have these values:

'enabled ' for Turbo boost• 'enabled' for Hyper Threading•

The net effect of this is Turbo boost set as 'disabled' and Hyper Threading set as 'enabled'.

When a configuration change is made via a BIOS policy or via default BIOS settings, the UCS manager

immediately pushes these changes to the CIMC buffer. These changes take effect only after the server is

rebooted.

Configure

These BIOS settings can be configured via a BIOS policy:

Quiet boot1. Resume Ac on power loss2. Front Panel Lockout3. Turbo Boost4. Enhanced Intel Speedstep5. Hyper Threading6. Virtulization Technology7. Processor C3 Report8. Processor C6 Report9. VT for Directed IO10. Interrupt Remap11. Coherency Support12.

ATS Support13. Pass Through DMA Support14. Memory RAS Config15. NUMA16. LV DDR Mode17. Mirroring Mode (This shows up in the GUI when Memory RAS config is set to mirroring−mode.)18. Console Redirection19. BaudRate20.

Note: These settings in the BIOS policy are a superset of settings for all platforms. Therefore, some of these

settings are not applicable for certain platforms.

Network Diagram

This document uses this network setup:

BIOS Policy Configuration

For a BIOS policy configuration to work you must first create a BIOS policy and then associate it with a

Service profile, which can then be associated to a server or group of servers.

Create a BIOS Policy

Complete these steps in order to create a BIOS policy:

Open Policies and select BIOS Policies. Click the + icon to create a new BIOS policy.

Note: If you have created sub−organizations under the Root and you need to create a BIOS policy for

one of the sub−organizations, then select that sub−organization and click the + icon.

In the Main section give a name to the new BIOS policy and specify the values for the BIOS settings,

or else leave the default values. Click Next.

In the Processor section specify the values for the BIOS settings, or else leave the default values.

Click Next.

In the Intel Directed IO section specify the values for the BIOS settings, or else leave the default

values. Click Next.

In the RAS Memory section specify the values for the BIOS settings, or else leave the default values.

Click Next.

In the Server Management section specify the values for the BIOS settings, or else leave the default7.

values. Click Finish.

Associate the BIOS Policy to a Service Profile

After you create a new BIOS policy, attach it to a Service profile in order to apply it to a server or group of

servers. Refer to Create Service Profile for Cisco UCS Blade for information on how to create a service

profile. When you create a Service profile, in the Operational Policies section, expand BIOS Configuration

and assign the newly created BIOS policy to it. Click Finish.

Troubleshoot

There is currently no specific troubleshooting information available for this configuration.

Related Information

Create Pools to Simplify Blade Management in Cisco UCS• Technical Support & Documentation − Cisco Systems•

Contacts & Feedback | Help | Site Map

Cisco Systems, Inc.

Updated: Jul 06, 2010 Document ID: 112034

Andere Handbücher für UCS B440-M1

Inhaltsverzeichnis

Andere Cisco Server Handbücher

Cisco

Cisco UCS C240 M3 Bedienungsanleitung

Cisco

Cisco UCS C200 M2 Systemhandbuch

Cisco

Cisco Profile Series Bedienungsanleitung

Cisco

Cisco TelePresenceMCU 5300 Series Bedienungsanleitung

Cisco

Cisco UCS C210 Montage- und Wartungsanleitung

Cisco

Cisco Cisco MeetingPlace Express Betriebsanleitung

Cisco

Cisco VPN 3002 Hardware Client Manager Bedienungsanleitung

Cisco

Cisco CRS-16 DC Bedienungsanleitung

Cisco

Cisco UCS C Series Montageanleitung

Cisco

Cisco TelePresence Video Communication Server... Bedienungsanleitung

Cisco

Cisco TelePresence Service-Handbuch

Cisco

Cisco UCS C420 Montage- und Wartungsanleitung

Cisco

Cisco SCE 8000 10GBE Bedienungsanleitung

Cisco

Cisco TelePresence Server 7010 Referenzhandbuch

Cisco

Cisco MCS-78 Series Administratorhandbuch

Cisco

Cisco Meraki MX65 Bedienungsanleitung

Cisco

Cisco C880 M5 Bedienungsanleitung

Cisco

Cisco SNS-3515 series Handbuch

Cisco

Cisco ISE-3315 Bedienungsanleitung

Cisco

Cisco 3500 Series Bedienungsanleitung

Cisco

Cisco SFS 7008P Bedienungs- und Wartungsanleitung

Cisco

Cisco TelePresence Service-Handbuch

Cisco

Cisco TelePresence MSE 8710 Bedienungsanleitung

Cisco

Cisco UCS B200 M3 Handbuch

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung