Cisco UCS 5100 Bedienungsanleitung

UCS Uplink Ethernet Connection Configuration

Example

Document ID: 110267

Contents

Introduction

Prerequisites

Requirements

Components Used

Conventions

Configure

Network Diagram

1. Configure Uplink Ethernet Ports

2. Unconfigure an Uplink Ethernet Port

Verify

Troubleshoot

Related Information

Introduction

Each Cisco Unified Computing System (UCS) provides ports that can be configured as either Server Ports or

Uplink Ports. Ports are not reserved for specific use. They must be configured. You can add expansion

modules to increase the number of Uplink Ports on the Fabric Interconnect.

Create LAN and SAN Pin Groups in order to pin traffic from servers to a specific Uplink Port.

Prerequisites

Requirements

Cisco recommends that you have a working knowledge of UCS software and hardware before you attempt

this task.

Components Used

The information in this document is based on Cisco UCS.

The information in this document was created from devices in a specific lab environment. All of the devices

used in this document started with a default configuration. If your network is live, make sure that you

understand the potential impact of any command.

Conventions

Refer to the Cisco Technical Tips Conventions for more information on document conventions.

Configure

Cisco UCS Fabric Interconnects provide these port types:

Server PortsServer Ports handle data traffic between the Fabric Interconnect and the adapter cards

on the servers.

You can only configure Server Ports on the fixed port module. Expansion modules do not support

Server Ports.

•

Uplink Ethernet PortsUplink Ethernet Ports connect to external LAN Switches. Network bound

Ethernet traffic is pinned to one of these ports.

You can configure Uplink Ethernet Ports on either the fixed module or an expansion module.

•

Uplink Fibre Channel PortsUplink Fibre Channel Ports connect to external SAN Switches.

Network bound Fibre Channel traffic is pinned to one of these ports.

You can only configure Uplink Fibre Channel Ports on an expansion module. The fixed module does

not include Uplink Fibre Channel Ports.

•

This task describes only one method that is available to configure ports. You can also configure ports through

a right−click menu or from the General tab for the port..

Network Diagram

This is a typical topology used with the Cisco UCS:

Note that Uplink Ports are also known as border links.

1. Configure Uplink Ethernet Ports

Complete these steps:

Log into Cisco UCS Manager.1. In the Navigation pane, click the Equipment tab.2. In the Equipment tab, expand Fabric Interconnects > Fabric Interconnect_Name.3. Depending upon the location of the ports you want to configure, expand one of these:

Fixed Module♦ Expansion Module♦

Choose one or more of the ports under the Unconfigured Ports node.5. Drag the selected port or ports and drop them in the Uplink Ethernet Ports node.6.

The ports to be configured as Uplink Ethernet Ports are removed from the Unconfigured Ports folder

and added to the Uplink Ethernet Ports folder.

As shown, an Uplink Ethernet Port is successfully configured. Click OK.7.

Make sure the new Uplink Ethernet Port is physically connected to your upstream LAN switch and

the proper VLANs are configured.

2. Unconfigure an Uplink Ethernet Port

Complete these steps:

Fixed Module♦ Expansion Module♦

Choose one or more of the ports under the Uplink Ethernet Ports folder.5. Drag the selected port or ports and drop them into the Unconfigured Ports folder.6.

Click Yes in order to confirm.7.

As shown, you have successfully unconfigured an Uplink Ethernet Port.8.

Verify

There is currently no verification procedure available for this configuration.

Troubleshoot

There is currently no specific troubleshooting information available for this configuration.

Related Information

Technical Support & Documentation − Cisco Systems•

Contacts & Feedback | Help | Site Map

Cisco Systems, Inc.

Updated: Apr 27, 2010 Document ID: 110267

Andere Handbücher für UCS 5100

Inhaltsverzeichnis

Andere Cisco Server Handbücher

Cisco

Cisco UCS E Series Bedienungsanleitung

Cisco

Cisco 700 series Installations- und Betriebshandbuch

Cisco

Cisco 3500 Series Bedienungsanleitung

Cisco

Cisco MCS-78 Series Administratorhandbuch

Cisco

Cisco UCS B200 M3 Systemhandbuch

Cisco

Cisco NCS 1001 Bedienungsanleitung

Cisco

Cisco PDS2000 Bedienungsanleitung

Cisco

Cisco UCS C260 Montage- und Wartungsanleitung

Cisco

Cisco UCS B200 Handbuch

Cisco

Cisco UCS Invicta C3124SA Handbuch

Cisco

Cisco TelePresence Service-Handbuch

Cisco

Cisco C220 M3 Handbuch

Cisco

Cisco UCS C200 Montage- und Wartungsanleitung

Cisco

Cisco GSS-4492R-K9 Bedienungsanleitung

Cisco

Cisco UCS Series Bedienungsanleitung

Cisco

Cisco UCS C240 Montage- und Wartungsanleitung

Cisco

Cisco Nexus 7000 Series Bedienungsanleitung

Cisco

Cisco UCS B22 M3 Handbuch

Cisco

Cisco SNS-3515 series Bedienungsanleitung

Cisco

Cisco UCS C220 M3 Bedienungsanleitung

Cisco

Cisco UCS C250 Montage- und Wartungsanleitung

Cisco

Cisco UCS B200 M4 Handbuch

Cisco

Cisco UCS 5100 Kurzanleitung

Cisco

Cisco AS5300 - Universal Access Server Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung