Cisco WAP121 Bedienungsanleitung

Data Sheet

Cisco WAP121 Wireless-N Access Point with

Single Point Setup

Secure, Easy-to-Deploy, Affordable Wireless-N Connectivity

Highlights

●Provides affordable high-bandwidth 802.11n wireless connectivity for demanding applications

●Easy to set up and manage by using the configuration wizard

●Single Point Setup simplifies the deployment of multiple wireless access points

●Safeguards business information with enhanced security, including advanced encryption, highly secure

authentication, and rogue access point detection

●Attractive design with internal antennas offers flexible installation options

●Can connect to a Power over Ethernet (PoE) switch or injector, simplifying installation and eliminating the

need for expensive additional wiring

Product Overview

In an increasingly mobile workplace, providing secure, high-speed wireless connectivity to employees and guests

is more important than ever. The Cisco WAP121 Wireless-N Access Point with Single Point Setup is an easy,

affordable way to improve the performance and reach of your small business network with advanced 802.11n

wireless technology. This flexible solution is ideal for connecting up to 10 employees on a single access point.

With Single Point Setup controllerless multi-access point deployment technology, the wireless LAN can scale up

to four WAP121s to provide broader coverage and support additional users as business needs change.

Designed for today’s performance-intensive applications, the Cisco WAP121 employs 802.11n wireless

technology to deliver high throughput and extended range throughout your office. It features built-in quality-of-

service (QoS) features that let you prioritize bandwidth-sensitive traffic, enabling the deployment of business-

quality voice over IP (VoIP) and video applications.

The Cisco WAP121 is simple to set up and use, with intuitive wizard-based configuration to get you up and

running in minutes. A sleek, compact design with flexible mounting options enables the access point to smoothly

blend into any small business environment. Support for PoE makes the device easy to install without the need for

separate power plugs or expensive new wiring.

To enhance reliability and safeguard sensitive business information, the Cisco WAP121 supports both Wired

Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA2), encoding all your wireless transmissions with

powerful encryption. In addition, 802.1X RADIUS authentication helps keep unauthorized users out. For

organizations that need to provide secure wireless access to employees, customers, and partners, it also provides

support for separate virtual networks, with granular configuration options that let you provide the appropriate level

of access for different users.

Single Point Setup provides a unique centralized method to administer and control wireless services across

multiple access points. Via one access point on the LAN you have a single view of the whole WLAN to replicate

configuration, security, and management across all access points.

With the Cisco WAP121, you can extend highly secure business-class wireless networking anywhere in the office,

with the reliability and flexibility to meet changing business needs.

Figure 1 shows a typical configuration using this wireless access point. Figures 2 and 3 show the front and back,

respectively, of the Cisco WAP121 Wireless-N Access Point with Single Point Setup.

Figure 1. Typical Configuration

Figure 2. Front Panel of the Cisco WAP121 Wireless-N Access Point with Single Point Setup

Figure 3. Back Panel of the Cisco WAP121 Wireless-N Access Point with Single Point Setup

Features

●Highly secure, high-speed 802.11n wireless networking delivers enhanced throughput and extended range

for bandwidth-intensive applications.

●Wizard-based setup and configuration enables fast, simple deployment.

●Single Point Setup controllerless multi-access point deployment and management technology makes

configuration simple.

●Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point

detection, helps protect sensitive business information.

●Support for PoE enables easy installation without expensive additional wiring.

●Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second

Ethernet network.

●Elegant, compact design with internal antennas and versatile mounting kit enables installation on a ceiling,

wall, or desktop.

●Intelligent QoS prioritizes network traffic to help keep critical network applications running at

top performance.

●Power-saving sleep mode and port control features help maximize energy efficiency.

●Highly secure guest access enables safe wireless connectivity for visitors.

●Support for IPv6 lets you deploy future networking applications and operating systems without

costly upgrades.

Specifications

Table 1 lists the specifications, package contents, and minimum requirements for the Cisco WAP121 Wireless-N

Access Point with Single Point Setup.

Table 1. Specifications

Specifications Description

Standards IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D

(Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)

Ports LAN Fast Ethernet auto sensing, DC jack

Switch Power button (on/off)

Buttons Power (on/off) push button, Reset button

Cabling type Category 5e or better

Antennas Internal antennas optimized for wall, ceiling, or desktop placement

LEDs Power, WLAN, LAN

Operating system Linux

Physical Interfaces

Ports 10BASE-T/100BASE-TX Ethernet, 12V DC power with support for 802.3af PoE

Power supply External 12V 0.5A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af PoE

Buttons Power (on/off) push button; Reset button

Lock slot Slot for Kensington lock

LED Power, Wireless, Ethernet

Physical Specifications

Physical dimensions (W x D x H) 4.89 x 4.89 1.38 in. (124.17 x 124.17 x 35 mm)

Weight 0.37 lb or 168 g

PoE

PoE 802.3af

Peak PoE power 6W

Network Capabilities

VLAN support Yes

Number of VLANs 1 management VLAN plus 4 VLANs for Service Set ID (SSID)

Multiple SSIDs 4

802.1X supplicant Yes

SSID to VLAN mapping Yes

Auto channel selection Yes

Spanning tree Yes

Load balancing Yes

IPv6 Yes

●IPv6 host support

●IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.

Layer 2 802.1Q-based VLANS, 4 active VLANS plus 1 management VLAN

Specifications Description

Security

WPA/WPA2/WEP Yes, including Enterprise authentication

Access control Yes, management access control list (ACL) plus MAC ACL

Secure management HTTPS

Wi-Fi Protected Setup (WPS) Yes (soft WPS, no hardware push button)

SSID broadcast Yes

Rogue access point detection Yes

Mounting and Physical Security

Multiple mounting options Desktop installation; mounting bracket included for easy ceiling or wall mounting

Physical security lock Kensington lock slot

Quality of Service

QoS Wi-Fi Multimedia & Traffic Specification (WMM TSPEC)

Performance

Wireless throughput Up to 300 Mbps data rate (real-world throughput will vary)

Recommended user support Up to 16 connected users, or 10 active users.

Configuration

Web user interface Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)

Multi-Access Point Management

Single Point Setup Yes

Maximum access points per

cluster 4

Active clients per cluster 40

Management

Management protocols Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour

Remote management Yes

Event logging Local, remote syslog, email alerts

Network diagnostics Logging and packet capture

Web firmware upgrade Firmware upgradable through web browser, imported/exported configuration file

Dynamic Host Configuration

Protocol (DHCP) DHCP client

IPv6 host Yes

Wireless

Frequency Single-band 2.4 GHz

Radio and modulation type Single radio, orthogonal frequency division multiplexing (OFDM)

WLAN 802.11n

Operating channels 1 to 13 (depending on country)

Channels 1 through 11 (FCC)

Channels 1 through 13 (ETSI)

Wireless isolation Wireless isolation between clients

External antennas None

Internal antennas Internal fixed PIFA antennas

Antenna gain in dBi 2 dBi each antenna

Transmitted output power ●802.11b @ 11 Mbps: 17 dBm

●802.11g @ 54 Mbps: 13 dBm

●802.11n @ HT20HT40, MCS15: 13 dBm

Specifications Description

Receiver sensitivity ●802.11b: 11 Mbps @ –86 dBm

●802.11g: 54 Mbps @ –71 dBm

●802.11n: 300 Mbps @ –64 dBm

Wireless Distribution System

(WDS) Yes

Roaming Yes

Multiple SSIDs 4

Wireless VLAN map Yes

WLAN security Yes

WMM Yes, with unscheduled automatic power save and voice profile

Operating Modes

Access point Access Point mode, WDS bridging, Workgroup Bridge mode

Environmental

Power 12V, 0.5A DC input, and IEEE802.3af compliant PoE

Certifications FCC class B, CE, IC, Wi-Fi

Operating temperature 0°to 40°C (32°to 104°F)

Storage temperature –20°to 70°C (–4°to 158°F)

Operating humidity 10% to 85% noncondensing

Storage humidity 5% to 90% noncondensing

Mean time between failures

(MTBF) 531189 hours

Package Contents

●Cisco WAP121 Wireless-N Access Point with Single Point Setup

●Ceiling/wall mounting kit

●User guide on CD-ROM

●Quick-start guide

●Ethernet network cable

●12V, 0.5A power supply

Minimum Requirements

●802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC

●Switch/router with PoE support or PoE injector when used with PoE

●Web-based configuration: Java-enabled web browser

Warranty

Access point Limited lifetime

Power supply 1-year warranty

Ordering Information

Table 2 gives ordering information for the Cisco WAP121 Wireless-N Access Point with Single Point Setup.

Table 2. Ordering Information

Part Number Description

WAP121-A-K9-AU Cisco WAP121 Wireless-N Access Point with Single Point Setup (Australia, New Zealand)

WAP121-A-K9-CA Cisco WAP121 Wireless-N Access Point with Single Point Setup (Canada)

WAP121-A-K9-NA Cisco WAP121 Wireless-N Access Point with Single Point Setup (U.S., Latin America)

WAP121-A-K9-AR Cisco WAP121 Wireless-N Access Point with Single Point Setup (Argentina)

WAP121-E-K9-CN Cisco WAP121 Wireless-N Access Point with Single Point Setup (China)

WAP121-E-K9-G5 Cisco WAP121 Wireless-N Access Point with Single Point Setup (Europe, Asia)

SB-PWR-INJ1-xx Cisco Small Business Gigabit Power over Ethernet Injector

Cisco Limited Lifetime Warranty for Cisco Small Business Series Products

This Cisco Small Business product comes with a limited lifetime hardware warranty for complete peace of mind.

Product warranty terms and other information applicable to Cisco products are available at

www.cisco.com/go/warranty.

Cisco Small Business Support Service

This optional service offers affordable, 3-year peace-of-mind coverage. This subscription-based, device-level

service helps you protect your investment and derive maximum value from Cisco Small Business products.

Delivered by Cisco and backed by your trusted partner, this comprehensive service includes software updates,

extended access to the Cisco Small Business Support Center, and expedited hardware replacement, should it

be required.

For More Information

For more information on Cisco Small Business products and solutions, visit www.cisco.com/smallbusiness or

www.cisco.com/go/wap121.

Printed in USA C78-697404-01 11/12

Andere Handbücher für WAP121

Inhaltsverzeichnis

Andere Cisco Drahtloser Zugangspunkt Handbücher

Cisco

Cisco Aironet 1250 Series Bedienungsanleitung

Cisco

Cisco Meraki MR70 Bedienungsanleitung

Cisco

Cisco Aironet 1140 Series Bedienungsanleitung

Cisco

Cisco AP541N-A-K9 Bedienungsanleitung

Cisco

Cisco Aironet 600 Series Bedienungsanleitung

Cisco

Cisco AIR-LAP1310G Bedienungsanleitung

Cisco

Cisco WAP4410N - Small Business Wireless-N Access... Bedienungsanleitung

Cisco

Cisco AIR-AP352E2R - Aironet 350 - Wireless Access... Bedienungsanleitung

Cisco

Cisco Meraki MR52 Bedienungsanleitung

Cisco

Cisco Aironet 1520 Series Bedienungsanleitung

Cisco

Cisco Catalyst Wireless 9163E Bedienungsanleitung

Cisco

Cisco AIR-AP1572IC Handbuch

Cisco

Cisco GR10-HW Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Cisco

Cisco Meraki MR36H Bedienungsanleitung

Cisco

Cisco Meraki MR42 Bedienungsanleitung

Cisco

Cisco Aironet 1815T Bedienungsanleitung

Cisco

Cisco WAP121 Bedienungsanleitung

Cisco

Cisco Catalyst 9136I Series Handbuch

Cisco

Cisco MR18 Bedienungsanleitung

Cisco

Cisco Aironet 3500 Series Bedienungsanleitung

Cisco

Cisco 1262 Bedienungsanleitung

Cisco

Cisco WAP125 Bedienungsanleitung

Cisco

Cisco 1522AG - Aironet Lightweight Outdoor Mesh Access... Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung