Cisco WAP2000 Bedienungsanleitung

Cisco Small Business

WAP2000 Wireless-G Access Point with Power Over

Ethernet

ADMINISTRATION

GUIDE

CCDE, CCENT, CCSI, Cisco Eos, Cisco HealthPresence, Cisco Ironport, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco Nurse Connect, Cisco Stackpower, Cisco StadiumVision,

Cisco TelePresence, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, Flip Mino, Flip Video, Flip Video (Design), Flipshare (Design), Flip Ultra,

and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Store, and Flip Gift Card are service marks; and Access Registrar,

Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo,

Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast

Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone,

MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase,

SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of

Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between

Cisco and any other company. (0907R)

Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide iii

Contents

Chapter 1: Introduction 1

Chapter 2: Planning Your Wireless Network 2

Network Topology 2

Roaming 3

Network Layout 3

Example of a Simple Wireless Network 4

Chapter 3: Product Overview 5

Front Panel 5

Back Panel 6

Side Panel 7

Chapter 4: Installing the WAP2000 Access Point 8

Before You Begin 8

Placement Tips 9

Wall Mounting 9

Connecting the Equipment 10

Using a PoE Router or Switch to Connect the WAP2000 11

Using a Standard Router or Switch to Connect the WAP2000 11

Verifying the Hardware Installation 12

Chapter 5: Getting Started 13

Accessing the Web-Based Utility 13

Navigating the Web-Based Utility 14

Setup 15

Wireless 15

AP Mode 15

Administration 15

Status 16

About 16

Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide iv

Contents

Help 16

Chapter 6: Configuring the WAP2000 Access Point 17

Setting Up Your Access Point 18

Configuring Basic Setup Settings 18

Configuring Basic Setup Settings 19

Configuring Network Setup Settings 20

Configuring Time Settings 21

Configuring Wireless Settings 22

Configuring Basic Settings 23

Configuring Security 25

Configuring WPA-Personal 27

Configuring WPA2-Personal 28

Configuring WPA2-Personal Mixed 29

Configuring WPA-Enterprise 31

Configuring WPA2-Enterprise 33

Configuring WPA2-Enterprise Mixed 35

Configuring RADIUS 37

Configuring WEP 39

Configuring Connection Control 41

Disabling Wireless Connection Control 41

Allowing Specified MAC Addresses to Connect to the Wireless Network 42

Preventing MAC Addresses from Connecting to the Wireless Network 42

Configuring Advanced Settings 43

Configuring VLAN & QoS 46

Configuring the Access Point’s Modes of Operation 48

Configuring Administration Settings 51

Configuring Management Settings 52

Configuring the Administration Log 55

Restoring Factory Default Settings 57

Upgrading the Firmware 58

Rebooting the Access Point 59

Managing the Access Point’s Configuration 60

Verifying Access Point Status 61

Checking Local Network Status 61

Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide v

Contents

Checking Wireless Status 63

Checking System Performance 64

Using Windows Help Menus 66

TCP/IP 66

Shared Resources 66

Network Neighborhood/My Network Places 66

Appendix A: Troubleshooting 67

Appendix B: Wireless Security Checklist 72

Security Checklist 72

Change the Default Wireless Network Name or SSID 73

Disable SSID Broadcast 73

Change the Default Password 73

Change the Administrator’s Password Regularly 73

Enable MAC Address Filtering 74

Change the SSID Periodically 74

Enable Encryption 74

General Network Security Guidelines 76

Additional Security Tips 76

Appendix C: Specifications 77

Specifications 77

Setup/Configuration 77

Management 78

Operating Modes 78

Wireless 78

Security 79

Quality of Service 79

Environmental 80

Appendix D: Where to Go From Here 81

Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide 1

Introduction

Thank you for choosing the WAP2000 Wireless-G Access Point with Power Over

Ethernet.

The Wireless-G Access Point with Power Over Ethernet is ideal for small

businesses that want to expand their existing wired networks or create new

wireless networks for the workforce or guests. The access point features

RangeBooster technology that is compatible with standard 802.11g but with a

range up to two times further and throughput up to 35 percent faster. Unlike

ordinary wireless technologies that are hampered by wireless signals that reflect

off walls, ceilings, and other objects, RangeBooster uses these multiple signals

with two smart receivers at each end (router or access point and client adapter) to

boost range and throughput speeds. As a result, a RangeBooster solution reduces

or eliminates wireless signal dead spots in offices and other buildings so users

can connect to the network in more areas. The access point comes with two 3 dBi

antennas for increased power, also helping to extend the range of the access

point.

Advanced security features like Wi-Fi Protected Access™ (WPA2 Enterprise),

make this solution ideal for business. Integrated Quality of Service (QoS) features

provide consistent voice and video quality on both the wired and wireless

networks, enabling your workforce to communicate or view video content without

disruptions and delay.

The Wireless-G Access Point with Power Over Ethernet can be powered from its

included AC adapter or from a Power over Ethernet (PoE) Switch using Ethernet

cabling, enabling mounting in ceilings or high on walls where power outlets may

not be available.

Additional features like multiple BSSIDs, wireless roaming, and auto-channel

selection, give your business added flexibility to keep employees and guests

connected. The access point also features dual firmware images so it remains

functional if a firmware upgrade process is disrupted.

Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide 2

Planning Your Wireless Network

Before deploying your WAP2000 Wireless-G Access Point with Power Over

Ethernet, take some time to plan your wireless network.

This chapter includes the following topics:

•Network Topology, page 2

•Roaming, page 3

•Network Layout, page 3

•Example of a Simple Wireless Network, page 4

Network Topology

A wireless network is a group of computers, each equipped with one or more

wireless adapters. Computers in a wireless network must be configured to share

the same radio channel to talk to each other. Several computers equipped with

wireless cards or adapters can communicate with each other to form an ad-hoc

network without the use of an access point.

Cisco wireless adapters also provide access to a wired network when using an

access point or wireless router. An integrated wireless and wired network is

called an infrastructure network. Each wireless computer in an infrastructure

network can talk to any computer in a wired or wireless network via the access

point or wireless router.

An infrastructure configuration extends the accessibility of a wireless computer to

a wired network, and may double the effective wireless transmission range for

two wireless adapter computers.

Because an access point can forward data within a network, the effective

transmission range in an infrastructure network may be doubled (depending on

antenna characteristics).

Planning Your Wireless Network

Roaming

Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide 3

Roaming

An infrastructure configuration also supports roaming capabilities for mobile

users. Roaming means that you can move your wireless computer within your

network and the access points will pick up the wireless computer’s signal,

providing that they both share the same wireless security and SSID.

Before you consider roaming, choose a feasible radio channel and optimum

access point position. Proper access point positioning combined with a clear

radio signal will greatly enhance performance.

NOTE Spanning Tree Protocol should be disabled on the switches connecting to the APs

to allow roaming to work without disruption.

Network Layout

The WAP2000 access point has been designed for use with 802.11g and 802.11b

products, such as the notebook adapters for your laptop computers, PCI adapters

for your desktop computers, and USB adapters for either a laptop or desktop.

These wireless products can also communicate with a 802.11g or 802.11b

wireless print server.

To link your wired network to your wireless network, connect the access point’s

Ethernet network port to any switch or router.

For more information about wireless products, visit the Cisco website at

www.cisco.com.

Planning Your Wireless Network

Example of a Simple Wireless Network

Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide 4

Example of a Simple Wireless Network

The following diagram shows a typical infrastructure wireless network setup.

This example shows a typical infrastructure wireless network setup. The wireless

access point connects to a switch that provides power to the access point. The

access point can connect multiple wireless devices to the network.

This network provides connectivity among wireless network devices and

computers that have a wired connection to the switch. The switch connects to a

router that connects to an ISP for Internet access.

195028

Wireless clients

WAP2000

Wireless Access Point

Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide 5

Product Overview

This chapter describes the physical features of the Cisco WAP2000 Wireless-G

Access Point with Power Over Ethernet and includes the following sections:

•Front Panel, page 5

•Back Panel, page 6

•Side Panel, page7

Front Panel

The LEDs on the front panel of the access point display information about network

activity.

POWER—(Green) Lights up when the access point is powered on.

PoE—(Green) Lights up when the access point is powered through an Ethernet

cable.

WIRELESS—(Green) Lights up when the wireless module is active on the access

point. The LED flashes when the access point is actively sending or receiving data

from a wireless device.

Andere Handbücher für WAP2000

Inhaltsverzeichnis

Andere Cisco Drahtloser Zugangspunkt Handbücher

Cisco

Cisco WAP2000 Bedienungsanleitung

Cisco

Cisco Aironet 1540 Series Handbuch

Cisco

Cisco Linksys WAP54G LA Bedienungsanleitung

Cisco

Cisco Meraki MR36-HW Handbuch

Cisco

Cisco Aironet 1400 Series Bedienungsanleitung

Cisco

Cisco WAP150 Bedienungsanleitung

Cisco

Cisco Linksys WAP610N Bedienungsanleitung

Cisco

Cisco Aironet 1530 Bedienungsanleitung

Cisco

Cisco 800 Series Bedienungsanleitung

Cisco

Cisco WAP300N Bedienungsanleitung

Cisco

Cisco AIR-AP1251AG-A-k9 Handbuch

Cisco

Cisco WAP4410N - Small Business Wireless-N Access... Bedienungsanleitung

Cisco

Cisco Aironet Wave 2 Installationshandbuch

Cisco

Cisco Catalyst IW6300 Series Handbuch

Cisco

Cisco M10-RM Kurzanleitung

Cisco

Cisco MERAKI MR72 Handbuch

Cisco

Cisco AIR-AP1832I K9C Series Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Cisco

Cisco Cisco Aironet Wireless LAN Client Bedienungsanleitung

Cisco

Cisco WAP121 Bedienungsanleitung

Cisco

Cisco Aironet 1530 Series Handbuch

Cisco

Cisco Small Business AP541N Bedienungsanleitung

Cisco

Cisco Catalyst 9136I Series Bedienungsanleitung

Cisco

Cisco Small Business WAP44 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung