Clarke CAM6000 Installations- und Betriebshandbuch

- 1 -

24” DRUM FAN

MODEL No: CAM6000

Part No: 3231555

OPERATING & MAINTENANCE

INSTRUCTIONS

30” DRUM FAN

0108

- 2 -

CLARKE GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a pe-

riod of 12 months from the date of purchase. Please keep your receipt as

proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product

can be returned to us without prior permission.

This guarantee does not affect your statutory rights.

Please read these instructions carefully before operating the tool

Thank you for purchasing this CLARKE 30” DRUM FAN.

Before using the product, please read this manual thoroughly and carefully fol-

low all instructions given. This is for your own safety and that of others around you,

and is also to help you achieve long and trouble free service from your new fan.

PARTS & SERVICE TEL: 020 8988 7400

or e-mail as follows:

PARTS: [email protected]

SERVICE: Service@clarkeinternational.com

Please note that the details and specifications contained herein are correct at the time of going to

print. However CLARKE International reserve the right to change specifications at any time without

prior notice. Always consult the machines data plate

- 3 -

SPECIFICATIONS

The CAM6000 is designed for use inside ONLY, it has a powerful steel fan with a fully

enclosed 350w motor. Its thermal protection is perfect for industrial environments. It has a

300° tilt range. The fan can be mounted on the ceiling and is supplied with mounting

bracket.

Model: .................................................................................... CAM6000

Part No: .................................................................................. 3231555

Voltage: .................................................................................. 230 V

Wattage: ................................................................................ 350 W

Speeds: ................................................................................... 3

Dimensions (LWH): ................................................................. 900 x 330 x 990 mm

Weight: ................................................................................... 27.5 kg

LIST OF CONTENTS

Before commencing assembly, check for damage and or shortages etc, any damage or

shortage should be reported to your Clarke dealer where the fan was originally

purchased.

• 1 x Fan Assembly

• 2 x Rubber Feet With Mounting Brackets

• 2 x Moulded Wheels

• 1 x Handle

SAFETY PRECAUTIONS

• DO NOT use in dusty environments.

• DO NOT use in environments with high fumes from chemicals etc.

• DO NOT use as an extractor fan.

• DO NOT use in areas of high humidity/water vapour, i.e. bathrooms etc.

• DO NOT connect fan to ducting system.

Cleaning

• Ensure the fan is switched off, then remove the plug from the socket.

• Do not use any harmful cleaning agents for cleaning.

• Only use a clean soft dampened cloth and wipe dry after cleaning.

• DO NOT bend the blades.

• The motor bearings are permanently sealed and do not require any additional

lubrication.

- 4 -

This machine must be wired up in accordance with the following colour code:

BLUE - NEUTRAL

BROWN - LIVE

GREEN/YELLOW - EARTH

•Connect the BLUE coloured cord to the plug terminal marked “N”

•Connect the BROWN coloured cord to the plug terminal marked “L”

•Connect the GREEN/YELLOW coloured cord to the plug terminal marked “E”

If this appliance is fitted with a plug which is moulded on to

the electric cable (i.e. non-rewireable) please note:

1. The plug must be thrown away if it is cut from the

electric cable. There is a danger of electric shock if it

is subsequently inserted into a socket outlet.

2. Never use the plug without the fuse cover fitted.

Fuse Rating

The fuse in the plug must be replaced with one of the same rating and this replacement

must be approved to BS1362.

If in doubt, consult a qualified electrician. Do not attempt any electrical repairs yourself.

Cable Extension

Always use an approved cable extension suitable for the power rating of this tool (see

specifications), the conductor size should also be at least the same size as that on the

machine, or larger. When using a cable reel, always unwind the cable completely.

3. Should you wish to replace a detachable fuse carrier, ensure that the correct

replacement is used (as indicated by marking or colour code).

4. Replacement fuse covers can be obtained from your local dealer or most electrical

stockists.

IMPORTANT:

If a cable extension is needed, it is essential to comply with the following data.

Voltage Extension length Cable section

230v Up to 20m 2.5mm2

230v From 20 to 50m 4mm2

This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for

connection to a standard, domestic electrical supply. Should the plug need changing at

any time, ensure that a plug of identical specification is used.

Electrical Connections

WARNING ! THIS APPLIANCE MUST BE EARTHED

- 5 -

Assembly item numbers in brackets refer to parts list on page 7.

Some assembly is required before using the fan.

Floor Mounting

1Fit handle (item 13) to the fan housing (item 11) using screws x 2 (item 12).

2Fit wheels x 2 (item 22) to the frame using shoulder screws x 2 (item 20) and washers

x 2 (item 21).

3Fit feet brackets x 2, (item 27) using screws x 4 (item 28) and washers x 4 (item 29).

4Fit feet x 2 (item 26) onto brackets using screws x 2 (item 24) and washers x 2 (item

25).

5Plug in and switch on, adjust the fan speed to suit.

WARNING

NEVER OPERATE THE FAN WITH EITHER FRONT OR REAR GRILLS REMOVED.

- 6 -

Parts Diagram

- 7 -

Parts List

Item Part Number Description Qty

1 OT600001 BRAND NAME PLATE 1

2 OT600002 SCREW M16 X 12 16

3 OT600003 WASHER 6MM 16

4 OT600004 FRONT AND REAR GRILL 2

5 OT600005 FAN BLADE 1

6 OT600006 SCREW M10 X 13 1

7 OT600007 MOTOR 1

8 OT600008 SCREW M6 X 12 8

9 OT600009 NUT M6 8

10 OT600010 NUT M6 2

11 OT600011 DRUM FAN HOUSING 1

12 OT600012 SCREW M6 X 10 2

13 OT600013 HANDLE 1

14 OT600014 SWITCH BOX 1

15 OT600015 POWER CORD & PLUG 1

16 OT600016 SCREW ST4 X 12 4

17 OT600017 FRAME 1

18 OT600018 SHOCK ABSORBER 2

19 OT600019 SCREW M12 X 36 2

20 OT600020 SCREW M12 X 70 2

21 OT600021 WASHER 12MM 2

22 OT600022 WHEEL 2

23 OT600023 SCREW M5 X 10 2

24 OT600024 WASHER 5MM 2

25 OT600025 FOOT 2

26 OT600026 FOOT HOLDER 2

27 OT600027 SCREW M6 X 12 4

28 OT600028 WASHER 6MM 4

- 8 -

Inhaltsverzeichnis

Andere Clarke Lüfter Handbücher

Clarke

Clarke CAM36C Bedienungsanleitung

Clarke

Clarke Air CAM24 Bedienungsanleitung

Clarke

Clarke CFF18C100 Bedienungsanleitung

Clarke

Clarke Air CBF20 Bedienungsanleitung

Clarke

Clarke AIR CAM6000 Bedienungsanleitung

Clarke

Clarke CAM30B Bedienungsanleitung

Clarke

Clarke air CAM200 Installations- und Betriebshandbuch

Clarke

Clarke CONTRACTOR CON350 Bedienungsanleitung

Clarke

Clarke CAM20R Bedienungsanleitung

Clarke

Clarke CAM30110V Bedienungsanleitung

Clarke

Clarke CONTRACTOR CON400 Bedienungsanleitung

Clarke

Clarke Air CAM5002 Bedienungsanleitung

Clarke

Clarke CONTRACTOR CON500 Bedienungsanleitung

Clarke

Clarke CAM5002 Installations- und Betriebshandbuch

Clarke

Clarke CBF18 Bedienungsanleitung

Clarke

Clarke CAM200B Bedienungsanleitung

Clarke

Clarke CBF20 Bedienungsanleitung

Clarke

Clarke CAM24C Bedienungsanleitung

Clarke

Clarke CFF18B100 Bedienungsanleitung

Clarke

Clarke CAM24R Bedienungsanleitung

Clarke

Clarke CAM500 Bedienungsanleitung

Clarke

Clarke CDF20HV-B Installations- und Betriebshandbuch

Clarke

Clarke Air CAM36 Bedienungsanleitung

Clarke

Clarke Air CAM900 Installations- und Betriebshandbuch

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung