Clarke CAM5002 Installations- und Betriebshandbuch

24” INDUSTRIAL HIGH OUTPUT FAN

MODEL No: CAM5002

Part No: 3231550

OPERATING & MAINTENANCE

INSTRUCTIONS

24” INDUSTRIAL HIGH OUTPUT FAN

0104

CLARKE GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period

of 12 months from the date of purchase. Please keep your receipt as proof

of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product

can be returned to us without prior permission.

This guarantee does not affect your statutory rights.

Please read these instructions carefully before operating the tool

Thank you for purchasing this CLARKE 24” Industrial High Output Fan.

Before using the product, please read this manual thoroughly and carefully follow

all instructions given. This is for your own safety and that of others around you, and

is also to help you achieve long and trouble free service from your new fan.

PARTS & SERVICE TEL: 020 8988 7400

or e-mail as follows:

PARTS: [email protected]

SERVICE: [email protected]

Please note that the details and specifications contained herein are correct at the time of going to

print. However CLARKE International reserve the right to change specifications at any time without

prior notice. Always consult the machines data plate

-1-

Specifications

The CAM5002 is designed for use inside ONLY, it has a powerful steel fan with a fully enclosed

250w motor. Its thermal protection is perfect for industrial environments. It has a 360° tilt

range. The fan can be mounted on the ceiling and is supplied with mounting bracket.

NOTE: The CAM5002 cannot be ‘flash tested’ due to components used within the speed control

box.

Model: .................................................................................... CAM5002

Part No: .................................................................................. 3231550

Voltage: .................................................................................. 230vac

Wattage: ................................................................................ 250w

Speeds: ................................................................................... 3

Dimensions (LWH): ................................................................. 735x340x835mm

Weight: ................................................................................... 24Kg

List of Contents

Before commencing assembly, check for damage and or shortages etc, any damage or

shortage should be reported to your Clarke dealer where the fan was originally purchased.

•1 x Fan Assembly

•2 x Rubber Feet With Mounting Brackets

•2 x Moulded Wheels

•1 x Ceiling Mounting Bracket

•3 x M12 Screws

•3 x Ø 12mm Plain Washers

•1 x Handle

Safety Precautions

•DO NOT use in dusty environments.

•DO NOT use in environments with high fumes from chemicals etc.

•DO NOT use as an extractor fan.

•DO NOT use in areas of high humidity/water vapour, i.e. bathrooms etc.

•DO NOT connect fan to ducting system.

Cleaning

•Ensure the fan is switched off, and isolated from the main electrical supply by

removing the plug from the socket.

•Do not use any harmful cleaning agents for cleaning.

•Only use a clean soft dampened cloth, wipe dry after cleaning.

•DO NOT bend the blades.

•The motor bearings are permanently sealed and do not require any additional

lubrication.

-2-

This machine must be wired up in accordance with the following colour code:

BLUE - NEUTRAL

BROWN - LIVE

GREEN/YELLOW - EARTH

•Connect the BLUE coloured cord to the plug terminal marked “N”

•Connect the BROWN coloured cord to the plug terminal marked “L”

•Connect the GREEN/YELLOW coloured cord to the plug terminal marked “E”

If this appliance is fitted with a plug which is moulded on to

the electric cable (i.e. non-rewireable) please note:

1. The plug must be thrown away if it is cut from the

electric cable. There is a danger of electric shock if it

is subsequently inserted into a socket outlet.

2. Never use the plug without the fuse cover fitted.

Fuse Rating

The fuse in the plug must be replaced with one of the same rating (13 amps) and this

replacement must be approved to BS1362.

If in doubt, consult a qualified electrician. Do not attempt any electrical repairs yourself.

Cable Extension

Always use an approved cable extension suitable for the power rating of this tool (see

specifications), the conductor size should also be at least the same size as that on the

machine, or larger. When using a cable reel, always unwind the cable completely.

3. Should you wish to replace a detachable fuse carrier, ensure that the correct

replacement is used (as indicated by marking or colour code).

4. Replacement fuse covers can be obtained from your local dealer or most electrical

stockists.

IMPORTANT:

If a cable extension is needed, it is essential to comply with the following data.

Voltage Extension length Cable section

230v Up to 20m 2.5mm2

230v From 20 to 50m 4 m m 2

This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for

connection to a standard, domestic electrical supply. Should the plug need changing at

any time, ensure that a plug of identical specification is used.

Electrical Connections

WARNING ! THIS APPLIANCE MUST BE EARTHED

-3-

Assembly item numbers in brackets refer to parts list on page 5.

Some assembly is required before using the fan.

Decide first if the fan is to be used on the floor or ceiling mounted.

Floor Mounting

1a Fit handle (item 13) to the fan housing (item 11) using screws x 2 (item 12).

2a Fit wheels x 2 (item 22) to the frame using shoulder screws x 2 (item 20) and washers

x 2 (item 21).

3a Fit feet brackets x 2, (item 27) using screws x 4 (item 28) and washers x 4 (item 29).

4a Fit feet x 2 (item 26) onto brackets using screws x 2 (item 24) and washers x 2 (item

25).

5a Plug in and switch on, adjust the fan speed to suit.

Ceiling Mounting

Choose location for the fan installation, ensuring correct electric supply is available.

1b Use the ceiling mounting plate (item 23) as a template, to mark drilling locations.

2b Drill holes in ceiling to suit suitable fixings, not supplied.

3b Fix the ceiling mounting plate to the ceiling using appropriate fixings, not supplied.

Ensure the mounting plate is secured sufficiently to take the weight of the fan.

4b Attach the fan to the mounting plate using screws supplied, (item 30).

5b Adjust the fan to desired position then tighten all three securing screws.

6b Plug in and switch on, adjust the fan speed to suit.

NOTE: all parts not used for ceiling mounted fans, should be stored safely for use if the fan is

to be floor mounted.

WARNING

NEVER OPERATE THE FAN WITH EITHER FRONT OR REAR GRILLS REMOVED.

Electrical Schematic

Speed Control Switch

-4-

Parts List

Item Part Number Description Qty

1 OT500201 Name plate 1

2 OT500202 Screw M18 x 12 16

3 OT500203 Washer 5mm 16

4 OT500204 Grill 2

5 OT500205 Fan blade 1

6 OT500206 Screw M10 x 13 1

7 OT500207 Motor 1

8 OT500208 Screw M6 x 12 6

9 OT500209 Nut M6 6

10 OT500210 Nut M8 2

11 OT500211 Drum Fan Housing 1

12 OT500212 Screw M6 x 10 2

13 OT500213 Handle 1

14 OT500214 Switch Box 1

15 OT500215 Power Cord & Plug 1

16 OT500216 Screw ST4 x 12 4

17 OT500217 Frame 1

18 OT500218 Shock Absorber 2

19 OT500219 Screw M12 x 35 2

20 OT500220 Screw M12 x 70 2

21 OT500221 Washer 12mm 2

22 OT500222 Wheel 2

23 OT500223 Ceiling Mounting Plate 1

24 OT500224 Screw M5 x 10 2

25 OT500225 Washer 5mm 2

26 OT500226 Foot 2

27 OT500227 Bracket 2

28 OT500228 Screw M6 x 12 4

29 OT500229 Washer 4

30 OT500230 Screw M12 x 20 3

-5-

Parts Diagram

-6-

Inhaltsverzeichnis

Andere Clarke Lüfter Handbücher

Clarke

Clarke CAM24R Bedienungsanleitung

Clarke

Clarke CAF304 Bedienungsanleitung

Clarke

Clarke CONTRACTOR CON400 Bedienungsanleitung

Clarke

Clarke CAM20R Bedienungsanleitung

Clarke

Clarke CAM400 Bedienungsanleitung

Clarke

Clarke Air CDF18HV-B Installations- und Betriebshandbuch

Clarke

Clarke Air CBF20 Bedienungsanleitung

Clarke

Clarke CAM14HV Bedienungsanleitung

Clarke

Clarke CAM200B Bedienungsanleitung

Clarke

Clarke CONTRACTOR CON500 Bedienungsanleitung

Clarke

Clarke Air Series Bedienungsanleitung

Clarke

Clarke CFF18B Bedienungsanleitung

Clarke

Clarke CONTRACTOR CON350 Bedienungsanleitung

Clarke

Clarke CFF18C100 Bedienungsanleitung

Clarke

Clarke CPF18B Bedienungsanleitung

Clarke

Clarke CAM6000 Installations- und Betriebshandbuch

Clarke

Clarke CDF20HV-B Installations- und Betriebshandbuch

Clarke

Clarke CBF18 Bedienungsanleitung

Clarke

Clarke CFF18B100 Bedienungsanleitung

Clarke

Clarke CAM24C Bedienungsanleitung

Clarke

Clarke CAM500 Bedienungsanleitung

Clarke

Clarke CAM24B Bedienungsanleitung

Clarke

Clarke air movers Handbuch

Clarke

Clarke Air CAM5002 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung