Clarke CAM36C Bedienungsanleitung

OPERATION & MAINTENANCE

INSTRUCTIONS

ORIGINAL INSTRUCTIONS DL1122

36” DRUM FAN

MODEL NO: CAM36C

PART NO: 3230448

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE 36” Drum Fan.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission. This guarantee does not effect your

statutory rights.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the

obligation to deal with the WEEE in accordance with the WEEE

regulations in relation to the treatment, recycling & recovery and

environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general

household waste. It must be disposed of according to the laws governing

Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal

facility.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ELECTRICAL CONNECTIONS

Before switching the product on, make sure that the voltage of your electricity

supply is the same as that indicated on the rating plate. This product is

designed to operate on 230VAC 50Hz. Connecting it to any other power

source may cause damage.

This product may be fitted with a non-rewireable plug. If it is necessary to

change the fuse in the plug, the fuse cover must be refitted. If the fuse cover

becomes lost or damaged, the plug must not be used until a suitable

replacement is obtained.

If the plug has to be changed because it is not suitable for your socket, or due

to damage, it should be cut off and a replacement fitted, following the wiring

instructions shown below. The old plug must be disposed of safely, as insertion

into a mains socket could cause an electrical hazard.

If the colours of the wires in the power cable of this product do not correspond

with the markings on the terminals of your plug, proceed as follows.

•TheBlue wire must be connected to the terminal which is marked N

or coloured Black.

•TheBrown wire must be connected to the terminal which is marked L

or coloured Red.

•TheYellow and Green wire must be connected to the terminal which

is marked E or or coloured Green.

We strongly recommend that this machine is connected to the mains supply

via a Residual Current Device (RCD)

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs

yourself.

WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS

THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE

MAINS SUPPLY.

Plug must be BS1363/A approved.

Always fit a 3 Amp fuse.

Ensure that the outer sheath of the cable is firmly held by the clamp

Neutral

(Blue)

Live

(Brown)

Earth

(Green and Yellow)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY PRECAUTIONS

1. ALWAYS read the manual before use.

2. ONLY suitable for indoor use.

3. DO NOT operate without the front and rear grills in place.

4. AV O I D using in dusty environments.

5. DO NOT use in environments containing chemical fumes etc.

6. DO NOT use as an extractor fan.

7. DO NOT use in areas of high humidity/water vapour, i.e. bathrooms etc.

8. DO NOT connect the fan to duct system.

9. DO NOT cover the fan with clothing or any material that will restrict free

airflow through the fan.

10. NEVER touch the blades with your hand or any loose object.

11. ALWAYS unplug the fan before moving it or performing maintenance.

12. DO NOT touch the fan when your hands are wet.

13. ONLY qualified electricians should disassemble, repair or rebuild the fan.

14. ALWAYS unplug the fan when it is not in use.

15. NEVER unplug the fan by holding the cable. Unplug by holding the plug.

16. NEVER use the fan if the cable or plug are damaged.

17. NEVER use the fan close to fires.

18. DO NOT use this fan with any solid-state speed control device to reduce

the risk of fire or electric shock.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

FAN CRADLE ASSEMBLY

1. Insert the axle through the

axle brackets on the outside

of the fan frame.

2. Align the holes in the

brackets to the screw holes in

the axle and secure using the

washers and hex bolts and a

cross headed screwdriver.

3. Slide each wheel over the

ends of the axle and secure

using the washers and hex

bolts using a 14mm spanner.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

OPERATION

FAN OPERATION

Always operate the fan in an upright position, following all instructions and

recommendations listed in this manual.

FAN LOCATION

Place the fan in the area of the room that will provide proper fan cooling.

FAN CONNECTION

Plug the fan directly into a 230v AC, 50Hz wall outlet. Be sure the plug fits tightly

into the outlet. A loose connection may cause overheating and damage to

the plug or fan.

TURNING FAN ON

Place the fan on a stable level surface. Plug the fan into a correctly grounded

outlet.

To start the fan, turn the switch from

the ‘0’ position (OFF) to the desired

fan speed.

• Low: 960 rpm

• High: 1090 rpm

TURNING FAN OFF

To turn the fan OFF, turn the switch from the current fan speed setting to the ‘0’

position. Remove the plug from the wall outlet.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

CLEANING & MAINTENANCE

CLEANING

If the fan has been operating for long periods in a very dusty environment, the

blades and motor assembly may eventually require cleaning.

1. Disconnect the power cable from the power supply.

2. Unscrew the front guard and lift it away carefully.

3. Wipe the fan blades with dry cloth and remove any dust from the motor

assembly with a soft paintbrush, vacuum cleaner or jet of compressed air.

•NEVER use polish or any corrosive liquid that will damage the surface

finish.

4. Replace the guard securely before use.

5. Periodic grille cleaning with a vacuum will prevent dust build up.

MAINTENANCE

Have any repairs carried out by a suitably qualified person.

The motor bearings are permanently sealed for life and do not require any

additional lubrication.

STORAGE

Keep the original carton for storage of the fan. Coil and tie the power cable to

avoid damage during storage.

Warning: NEVER OPERATE THE FAN WITH THE FRONT GUARD

REMOVED. DO NOT USE THE FAN IF IT HAS MALFUNCTIONED OR

BECOME DAMAGED IN ANY WAY.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PARTS LIST AND DIAGRAM

NODESCRIPTION NODESCRIPTION

1 Front Grille 9 Switch

2 Blade 10 Capacitor

3 Drum 11 Power Cable

4Handle 12Wheel

5 Rear Grille 13 Axle

6Motor 14AxleBrackets

7 Switch Box 15 Foot

8 Switch Knob 16 Support Pads

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SPECIFICATIONS

MODEL CAM36C

Part No: 3230448

Operating Voltage: 230 V AC (50Hz)

Rated Input Wattage: 450 W

Fan Speed - Low: 960 rpm

Fan Speed - High: 1090 rpm

Dimensions (W x D x H): 980 x 470 x 1000 mm

Fan Blade Diameter: 900 mm

Weight: 24.4 kg

IP Rating IPX0

ERP Ratings

Overall Efficiency: 30.4%

Measurement Category: A

Efficiency Category: Static

Efficiency Grade 40.08

Rated Motor Power Input @ Optimum

Energy Efficiency

482 W

Flow Rate @ Optimum Energy Efficiency 5580 m3/h

Pressure Rate @ Optimum Energy Efficiency 40 Pa

The Specific Ratio (EU 327/2011) 1

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

DECLARATION OF CONFORMITY - UKCA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarke Lüfter Handbücher

Clarke

Clarke CAF304 Bedienungsanleitung

Clarke

Clarke air CHV18WF Bedienungsanleitung

Clarke

Clarke Contractor CON305 Bedienungsanleitung

Clarke

Clarke CBF18 Bedienungsanleitung

Clarke

Clarke CPF18B Bedienungsanleitung

Clarke

Clarke CONTRACTOR CON350 Bedienungsanleitung

Clarke

Clarke CAM6000 Installations- und Betriebshandbuch

Clarke

Clarke CDF20HV-P Installations- und Betriebshandbuch

Clarke

Clarke CAM24C Bedienungsanleitung

Clarke

Clarke CAM110 Bedienungsanleitung

Clarke

Clarke Air CBF20 Bedienungsanleitung

Clarke

Clarke CAM30110V Bedienungsanleitung

Clarke

Clarke CDF20HV-B Installations- und Betriebshandbuch

Clarke

Clarke Air CAM24 Bedienungsanleitung

Clarke

Clarke CAM20R Bedienungsanleitung

Clarke

Clarke CAM5002 Installations- und Betriebshandbuch

Clarke

Clarke air CAM200 Installations- und Betriebshandbuch

Clarke

Clarke CONTRACTOR CON400 Bedienungsanleitung

Clarke

Clarke air movers Handbuch

Clarke

Clarke CBF20 Bedienungsanleitung

Clarke

Clarke CAM30B Bedienungsanleitung

Clarke

Clarke CAM14HV Bedienungsanleitung

Clarke

Clarke Air Series Bedienungsanleitung

Clarke

Clarke Air CAM36 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung