Clarke CVPW Kurzanleitung

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

MODEL NO: CVPW

PART NO:

PART NO: 6499644

Weak Chemical Vane Pump

INTRODUCTION

Thank you for purchasing this CLARKE vane pump,

Suitable for use with weak corrosive chemicals such as weak acid, alkali and water based chemicals

Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully.

SAFETY

To ensure safe and efficient operation, it is essential to read and follow each of these warnings and precautions.

1. When used to pump flammable liquids, improper use or installation of this product can cause serious bodily injury or

death.

2. Do NOT smoke near the pump or use the pump near an open flame. Fire could result.

3. When pumping flammable liquids, all equipment must be grounded to prevent the build up of static electricity

which may ignite vapours or gases.

SPECIFICATIONS

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of

purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not

used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior

permission.

This guarantee does not effect your statutory rights.

WARNING: THIS PRODUCT IS NOT SUITABLE FOR USE WITH FLUIDS FOR HUMAN CONSUMPTION OR AQUEOUS FLUIDS.

THIS PRODUCT SHOULD NOT BE USED FOR FLUID TRANSFER INTO AIRCRAFT.

Barrel Adaptor Size 2" BSP Outlet Tube Diameter 19 mm

Max Flow 0.35l per rotation Dims (WxDxH) 215 x 270 x 1325 mm

Inlet Tube Diameter 27 mm Product Weight 1.9 kg

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

FITTING THE PUMP TO A BARREL

1. Assemble the pump using the required number of inlet tubes. Use the PTFE tape at all connections

• The tube which contains the black fiter + mesh should be at the bottom.

2. Screw the collar into the threaded opening of the barrel.

3. Raise or lower the inlet tube so that it is just off of the bottom of the barrel when fitted.

USING THE PUMP

1. Make sure all connections are secure and place a suitable container under the spout.

2. Rotate the handle to draw fluid from the barrel.

• The first time you use the pump, liquid should begin flowing after several turns of the handle

MAINTENANCE

CLEANING THE INLET FILTER

1. Unscrew the inlet filter from the bottom of the inlet tube and clear away any debris it has trapped.

2. Replace the filter.

WHAT IS SUPPLIED ASSEMBLED

CAUTION: DO NOT USE THE PUMP WITHOUT THE FILTER IN PLACE.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

CHEMICAL RESISTANCE TABLE

• Room Temperature

•%SayMassConcentration

WATER ACIDS ALKALI PETROLEUM

BASED

HALOGENS ALCOHOL THINNER

Sea Water Acetic Acid

20%

Potassium

Hydroxide

25%

Silicone Oil Calcium

Chloride 10%

Ethanol 96% Acetone

Boric Acid

10%

Sodium

Hydroxide

solution 50%

Copper

Sulphate

Glycerine

Citric Acid

10%

Potassium

Dichromate

10%

Isopropanol

Hydraulic

Acid 35%

Soap Solution Methanol

Lactic Acid

80%

Sodium

Chloride 10%

Propanol

Nitric Acid

10%

Sodium

Nitrate 10%

Oxalic Acid

50%

Sodium

Thiosulphate

Phosphoric

Acid 50%

Zinc Chloride

10%

Sulphuric

Acid 70%

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

Dieses Handbuch passt für folgende Modelle

Andere Clarke Wasserpumpe Handbücher

Clarke

Clarke CSD4 Bedienungsanleitung

Clarke

Clarke PW2 Bedienungsanleitung

Clarke

Clarke CSP1530 Bedienungsanleitung

Clarke

Clarke DW75 Bedienungsanleitung

Clarke

Clarke CS85S Installations- und Betriebshandbuch

Clarke

Clarke PSV1A Bedienungsanleitung

Clarke

Clarke psp125b Bedienungsanleitung

Clarke

Clarke CM1 Installations- und Betriebshandbuch

Clarke

Clarke PSV5A Bedienungsanleitung

Clarke

Clarke DWP100A Bedienungsanleitung

Clarke

Clarke TAM100 7230035 Installations- und Betriebshandbuch

Clarke

Clarke EBP1100 Bedienungsanleitung

Clarke

Clarke CWP1000A Bedienungsanleitung

Clarke

Clarke CWBP300 Bedienungsanleitung

Clarke

Clarke CPE30A3 Bedienungsanleitung

Clarke

Clarke IVP13A Installations- und Betriebshandbuch

Clarke

Clarke HIPPO-3 Handbuch

Clarke

Clarke Hippo 2A Handbuch

Clarke

Clarke ISP11A Handbuch

Clarke

Clarke CSE400A Bedienungsanleitung

Clarke

Clarke HSE Series Installations- und Betriebshandbuch

Clarke

Clarke CSV4A Bedienungsanleitung

Clarke

Clarke HSEC651A Bedienungsanleitung

Clarke

Clarke PSE1A Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

moyno

moyno 2000 CC Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung