English
GREAT BRITAIN • customer service
tel: 020 8247 9300 e-mail [email protected] internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ Ver. 20180628
Freestanding Letterbox
Art.no 31-5131 Model TX009LD2
Please read theentire instruction manual before using theproduct
and then save it for future reference. We reserve theright for
any errors in text or images and any necessary changes made
to technicaldata. In theevent of technical problems or other
queries, please contact our Customer Services.
Installation
Shelf
Place thesloping shelf in thedesired position, there are three
heights to choosefrom.
1. Fasten thefour included
ground anchor bolts onto
thebase of theletterbox.
Fasten thebolts in such
away that you can adjust
theletter box up anddown.
2. Dig a30 cm deep hole in theground where theletter box is
to be located.
3. Fill thehole in theground with concrete.
4. Lay acouple of planks over
thehole and stand theletter
box on theplanks so that
thelower ends of thebolts
stick down into theconcrete
up to thethreads.
5. Use aspirit level to try and stand theletter box as vertical
as possible. Fine-adjustments can be made later using
thenuts on theground anchorbolts.
6. Leave theconcrete to dry for 24 hours before removing
theplanks.
7. Check thelevel of theletter box and adjust if necessary
using thenuts on theground anchorbolts.
Care and maintenance
Clean theletter box by wiping it with adampcloth. Useonly
mild cleaning agents, never solvents or corrosive chemicals.
Responsible disposal
Theproduct should be disposed of in accordance with local
regulations. Ifyou are unsure how to proceed, contact your
local council.
Specifications
Size 35×25×100cm
Letter flapsize 22×6cm
