Clearaudio Emotion SE Bedienungsanleitung
User manual
Bedienungsanleitung
© clearaudio electronic GmbH, 2022-11 Made in Germany
Emotion SE
Pic. similar /
Abb. ähnlich
User manual / Bedienungsanleitung
Page / Seite 2 © clearaudio electronic GmbH, 2022-11
User manual.........................................................2 - 19
Bedienungsanleitung...........................................20 - 37
Dear Clearaudio customer,
Thank you for purchasing the Clearaudio
Emotion SE
turntable.
A resonance minimized shape in combination with a stand alone motor unit, guarantees total isolation
of resonances from the turntable chassis, providing the best music reproduction and authentic High
End imaging. A high precision, patented Clearaudio -
CMB-bearing-technology
is completing the
analogue pleasure.
Please read the instruction manual for easy setup and to discover how to care for your
Emotion
SE
turntable to enjoy music for many years. Follow the instructions carefully to avoid any potential
damage. Not following our instructions could void your warranty.
We wish you a lot of musical enjoyment with your new Clearaudio
Emotion SE
turntable.
Clearaudio electronic GmbH
User manual / Bedienungsanleitung
Made in Germany Page / Seite 3
Safety instructions
1. General information
Check the turntable for any damage before using it. Do not connect the turntable if damaged!
Never connect the turntable if it has been dropped or gotten wet, contact your dealer to have the turntable checked.
Never expose the turntable to rain or moisture.
Never touch the power cord of the device with wet hands.
Regular visual inspections for defective insulation on the connection cable are also recommended for your own safety.
A damaged cable should be replaced immediately by a specialist!
Never pull on the power cord to unplug the device. Always pull directly on the plug!
The inside of the turntable is maintenance free. Never open the case or attempt to repair the unit yourself, since this
can lead to loss of warranty!
We recommend disconnecting the power supply from the mains if you do not operate the device for a longer period of
time.
The turntable does not feature an automatic shut-o mechanism.
Therefore, as soon as the stylus has reached the run-out groove, engage the tonearm lift and switch the turntable o.
Not suitable for children! Scope of delivery may contain small parts that can be swallowed.
2. Intended use
The
Emotion SE
is a turntable for playing records.
The intended use of the
Emotion SE
in accordance with the information provided in the user manual only.
The power supply may only be operated with maximum permissible connection values according to the technical data.
Any other use or modication of this product is not intended.
3. Location of installation
Avoid locations with direct sunlight, temperature uctuations and high humidity.
Likewise, avoid placing electronic devices near heaters, heat lamps, or other devices that produce heat.
The device is designed for operation at room temperature.
No objects with an open ame may be placed on or near the device (burning candles or similar).
4. Overload
The product is designed to comply with all necessary safety regulations. However, you should not leave the device
unattended under extreme loads.
5. Maintenance
Never use agressive cleaning detergent.
Donot usedry clothsfor cleaningas thisgeneratesstatic electricity. Suitablecleaning andcareproducts fromClearaudio
are available from www.analogshop.de or from specialist retailers.
The bearing of the turntable platter can be lubricated every 2 years with the oil provided.
Put 1 or 2 drops of the oil into the bearing for lubrication.
User manual / Bedienungsanleitung
Page / Seite 4 © clearaudio electronic GmbH, 2022-11
6. Health information
Permanently high volume can lead to various types of hearing damage. Use high volume responsibly!
7. Service
The
Emotion SE
turntable should be repaired during the guarantee period by the manufacturer only, otherwise the
warranty claim expires. All Clearaudio products should only be serviced by specialist retailers.
If, despite the high production standard, a service is necessary, the
Emotion SE
turntable must be send to Clearaudio
through your dealer.
8. Transport
Use the original packing material for further transportation of the
Emotion SE
turntable, otherwise serious damage could
occur.
Be sure to pack the device exactly as it was shipped.
Safe transport is only guaranteed in the original packaging.
Proceed in reverse as described for assembly when packing.
Always remove the turntable platter and replace the foam securing the sub-platter and cover the bearing with tape as
well. Otherwise serious damage can occur.
Remove also the pulley from the motor axle to avoid any damage during transport.
Clearaudio assumes no liability for any damage that may occur due to incorrect packing.
9. Disposal
Do not dispose this product together with other waste.
WEEE Reg. No.: DE26004446
10. CE Marking
This electronic product corresponds to the applicable guidelines for obtaining the CE mark.
User manual / Bedienungsanleitung
Made in Germany Page / Seite 5
Contents
1. Packing overview.................................................................6
2. List of components...............................................................7 - 8
3. Installation and setup..........................................................9 - 16
4. Troubleshooting...................................................................17 - 18
5. Technical data......................................................................19
Warranty information ..............................................................38 - 39
User manual / Bedienungsanleitung
Page / Seite 6 © clearaudio electronic GmbH, 2022-11
1. Packing overview
Pic. 1: Packing overview
1. Layer (top):
Motor-unit, motor-base (not shown)
top of bearing, belt, pulley, ttings and
accessories.
If ordered as package:
Clearaudio Satisfy Kardan tonearm and/
or Clearaudio pickup
2. layer (middle):
Turntable – chassis with integrated
lower bearing part
3. layer (bottom):
Platter
User manual / Bedienungsanleitung
Made in Germany Page / Seite 7
2. List of components
Clearaudio has developed a special and secure turntable packing to prevent your
Emotion SE
turntable from any transportation damage.
Please store this original packing, in case you need to ship the turntable.
Below you can nd the content of delivery of your Clearaudio
Emotion SE
turntable:
123
1Turntable chassis with mounted
lower bearing part, tonearm base
and height adjustable feets
4Motor drive unit with main lead and
motor base
2Turntable platter 5Acrylic motor pulley
3Bearing (upper part) with adjusted
bearing shaft 6Optional:
Clearaudio
Satisfy Kardan
tonearm
directwired, when ordered as a
package
456
Pic. 2.1: List of components
User manual / Bedienungsanleitung
Page / Seite 8 © clearaudio electronic GmbH, 2022-11
78 9
10 11 12
13 14 15
71 Pair of gloves 13 Screw driver
8Grounding wire for the
Emotion SE
turntable 14 Bearing oil
9 Clearaudio logo, self-adhesive 15 Clearaudio
Smart Stylus Gauge
(without cartridge)
10 Level gauge for the turntable
alignment 16 Not shown:
User Manual
11 2 pcs. drive belt (2 x 292 mm) 17 Not shown:
Warranty card, Clearaudio Quality
Certicate and return delivery note
12 3 pcs. hex wrench
(sizes: 1.5 / 2.5 / 3) 18 Not shown:
Optional: Clearaudio MM Cartridge
and
Smart Stylus Gauge
, only when
ordered as package
Pic. 2.2: List of components
User manual / Bedienungsanleitung
Made in Germany Page / Seite 9
3. Installation and set up
The setup and installation of the
Emotion SE
is done quickly and very easy.
Please use the white gloves during this procedure, to avoid scratches.
1.)
You should consider a safe and clean working area for the installation, as near as possible to the
nal position of the
Emotion SE
turntable.
First take out the motor and tonearm of the packing. Now you should take out the rst packing layer.
After that you can take out the
Emotion SE
turntable chassis from the next packing layer.
Place the turntable body on a clean underlay.
To avoid any damages to your bearing, the turntable platter should achieve room
temperature before the set up begin (approx. 20 ° Celsius).
2.)
Take the upper bearing part and place it on the lower bearing part, which is already integrated in the
chassis (picture 3).
3.)
Place the platter with both hands carefully onto the bearing.
Through a lightly (!!) up and down movement the platter will slip onto the bearing upper part
(picture 4).
Avoid major side force to prevent any damages to the ceramic bearing!
Pic. 3: Placing the bearing Pic. 4: Placing the platter
Make sure with gentle pressure that the platter is applying on the complete surface of the bearing.
User manual / Bedienungsanleitung
Page / Seite 10 © clearaudio electronic GmbH, 2022-11
4. ) Alignment of the turntable
The following adjustment is very important!
Place the Clearaudio
level gauge
on the platter (see Pic. 5) and bring the turntable in level by
turning the corresponding feet in the right direction.
The turntable is in level, when the air bubble in the level gauge is in the center.
Adjust the height of the turntable by turning the feet counter wise with the delivered hex wrench
(shown in picture 6).
Only if the turntable is proper aligned you will receive the best possible sound.
Pic. 5: Alignment of the turntable
Pic. 6: Height adjustment
Andere Handbücher für Emotion SE
4
Inhaltsverzeichnis
Sprachen:
Andere Clearaudio Drehscheibe Handbücher
Clearaudio
Clearaudio Performance DC Bedienungsanleitung
Clearaudio
Clearaudio concept wood Bedienungsanleitung
Clearaudio
Clearaudio Ovation Bedienungsanleitung
Clearaudio
Clearaudio Concept Bedienungsanleitung
Clearaudio
Clearaudio Charisma V2 MM Bedienungsanleitung
Clearaudio
Clearaudio Master Solution Bedienungsanleitung
Clearaudio
Clearaudio Concept Bedienungsanleitung
Clearaudio
Clearaudio smart power 12V Bedienungsanleitung
Clearaudio
Clearaudio Innovation Wood Bedienungsanleitung
Clearaudio
Clearaudio Double Matrix Professional Bedienungsanleitung
Clearaudio
Clearaudio Charisma V2.1 MM Bedienungsanleitung
Clearaudio
Clearaudio smart matrix SILENT Bedienungsanleitung
Clearaudio
Clearaudio Performance DC Bedienungsanleitung
Clearaudio
Clearaudio double matrix professional SONIC Bedienungsanleitung
Clearaudio
Clearaudio Master Innovation Bedienungsanleitung
Clearaudio
Clearaudio Avantgarde Bedienungsanleitung
Clearaudio
Clearaudio Ovation Bedienungsanleitung
Clearaudio
Clearaudio Concept Bedienungsanleitung
Clearaudio
Clearaudio Pulley extractor device Bedienungsanleitung
Clearaudio
Clearaudio Master Innovation Bedienungsanleitung
