Clearaudio Innovation Compact Bedienungsanleitung

User manual

electronic GmbH, 2017/11 Made in Germany

Innovation Compact

Innovation Compact Black

Picture: Package with

Clearaudio tonearm „Magnify“

und Clearaudio cartridge

„Stradivari V2 MC“.

Innovation Basic Wood

Picture: Package with

Clearaudio tonearm „Magnify“

und Clearaudio cartridge

„Stradivari V2 MC“.

Dear Clearaudio customer,

Congratulation’s to your choice of the

Innovation Compact

turntable, a world class turntable, hand-

made in Germany by Clearaudio electronic GmbH.

Resonance minimizing chassis sandwich construction in combination with the innovative motor unit

(low noise level and high turning moments), guarantees total isolation of resonances from the turn-

table chassis, providing the best music reproduction and authentic High End imaging.

A high precision, maintenance free sinter bronze bearing is completing the analogue pleasure.

The Clearaudio patented CMB-Bearing-Technology, an inverted bearing with jewelled and polished

ceramic bearing shaft and a bronzed liner, provides frictionless analog enjoyment.

Please read this instruction manual carefully, to avoid any damages or loss of warranty.

This manual will help you for an easy setup and guarantees the highest pleasure for a long time.

We wish you a lot of musical enjoyments with your new Clearaudio

Innovation Compact

turntable.

Clearaudio electronic GmbH

This section must be read before any connection is made to the mains supply.

WARNINGS

Don’t expose your turntable to rain or humidity.

Don’t handle the mains leads with wet hands.

Don’t place or insert anything into the equipment or through ventilation holes.

No naked ame sources, such as lighted candles, should be placed on the equipment.

CE-MARKING

EQUIPMENT MAINS WORKING SETTING

Your Clearaudio product has been prepared to comply with the household power and safety requirements

that exist in your area. This product can be connected to 230 V or 110 V AC (50 Hz and 60 Hz).

Recording und reproduction of any sound-material may require the consent of the creator. Please acknow-

ledge the information given in the

- Copyright Act 1956,

- Dramatic and Musical Performers Act 1958,

- Performers Protection Acts 1963 and 1972,

- Any more recent legal regulations.

The Clearaudio

Innovation Compact

meets the regulations concerning electromagnetic

disturbance (EMC) and low-voltage appliances.

User manual

2 © clearaudio electronic GmbH, 2017/11

Contents

1. Packing overview ................................................ 4

2. List of components .............................................. 5 - 6

3. Installation and setup ......................................... 7 - 10

4. Fine adjustment of the motor ............................. 11

5. Special instruction ............................................... 12

6. Technical data ..................................................... 13

Warranty information ..............................................14 - 15

User manual Stroboscope Testrecord ..................... 16 - 17

User manual

Made in Germany 3

1. Packing overview

Pic. 1: Packing overview

Accessories,

user manual,

warranty card,

Clearaudio Quality

Card,

Stroboscope Testre-

cord

Innovation Compact

turntable chassis incl.

mounted lower bea-

ring part and integra-

ted motor unit;

optional: tonearm

Platter with integ-

rated bearing upper

part;

power supply;

optional: cartridge

User manual

4 © clearaudio electronic GmbH, 2017/11

2. List of components

Clearaudio has developed a special and secure packing for your

Innovation Compact

turntable that

ensures a safe transportation.

Please keep this original packing, if you need to ship the turntable.

Below you nd the part list of the Clearaudio

Innovation Compact

turntable:

Pic. 2: List of components

3 4

5a 5b

1. Turntable body with mounted

lower bearing part 4. 3x Flat Pads

2. Platter with integrated upper

bearing part 5. Optional: Clearaudio

Universal

(Fig. 5 a) or

Magny

(Fig. 5 b) tonearm

Optional: 30 mm base for Universal tonearm

(not shown)

3. Power supply

Pic. 5b: Clearaudio

Magnify

tonearmPic. 5a: Clearaudio

Universal

tonearm

User manual

Made in Germany 5

Continuation of list

6 7 8

9 10 11

12 13 14

6. 1 Pair of white gloves 12. Bearing oil for occasional use

7. Grounding - wire for the

Innova-

tion

turntable (to connect in the

bottom bearing part)

13. Clearaudio

Stroboscope Testrecord

(Art. No. AC038) to adjust the exact speed

8. Level gauge for the turntable

alignment 14. Optional in package:

Clearaudio MC cartridge

9. 1 pcs. at belt 15. Optional in package:

Turntable + tonearm + cartridge

No illustration: cartridge alignment gauge

for

Magnify

Universal

tonearm (optional)

10. 4 pcs. hex wrench; sizes:

# 1,5/# 2,5/#3/#7 16. Not shown: warranty card, Clearaudio

Quality certicate card

11. Screw driver 17. Not shown: User Manual

Pic. 2.1: List of components

IMPORTANT NOTICE:

Please double check the tightness of all bolts, hardware, and mounting pods, as temperature uc-

tuations during transit may have caused the hardware to become loose.

User manual

6 © clearaudio electronic GmbH, 2017/11

3. Installation and setup

The setup of the

Innovation Compact

turntable is easy as the turntable chassis is pre-assembled and

has been tested at the factory.

Please use the white gloves enclosed in order to avoid scratches or unwanted ngerprints (platter).

The

Innovation Compact

turntable requires a space for setup of at least 18.90 inch x 19.29 inch.

18.90 inch

/ 480 mm

19.29 inch / 490 mm

Pic. 3: Required setup space

User manual

Made in Germany 7

Please follow the description step by step:

1.)

First take out the three black at pads out of the accessory bag. Place these at pads on your hi-

rack or another suitable base, where the nal position of your

Innovation Compact

turntable will be.

2.)

After that, take the

Innovation Compact

turntable body of the next packing layer and place the

spikes of the turntable on the at pads.

Pic. 4:

Innovation Compact

with tonearm base

Pic. 6: Oiling the bearing shaft

3.)

To avoid hum noises it can be necessary to ground the bearing. For that please plug in the provided

ground cable into the hole of the screw from the bearing at the bottom side of the turntable.

Pic. 5: Grounding the bearing of the

Innovation Compact

4.)

Remove the protective security tape from the bearing housing.

Place two drops of the synthetic bearing oil on the ceramic bearing shaft

(also available at www.analogshop.de / Art. No. AC068).

User manual

8 © clearaudio electronic GmbH, 2017/11

5.)

In the next step remove the lamination of the sensor, mounted on the turntable chassis (picture 7:

red frame).

Please remove the lamination extreme carefully and avoid any soiling and scratches.

6.)

6.1)

Take the platter with both hands (with white gloves) carefully out of the packing.

Please pay attention that the integrated bearing does not fall out of the platter!

The at side of the platter should face to the chassis and the side with the cut-out (for the record)

should face up.

6.2)

In the next step remove the lamination of the sensor on the bottom side of the platter.

Please remove the lamination extreme carefully and avoid any soiling and scratches.

6.3)

With both hands you can place the platter carefully onto the bearing.

Through a lightly (!!) up and down movement the platter will slip onto the bearing upper part (

picture 8).

Pic. 7: Removing the lamination

Pic. 8: Setting up the platter

Avoid major side forces to prevent any damages to the

ceramic bearing!

To avoid any damages on your bearing, the platter

should have room temperature before the setup begin

(approx. 20 ° Celsius).

Make sure with gentle pressure that the platter is ap-

plying on the complete surface of the bearing.

User manual

Made in Germany 9

7.)

To install the tonearm and / or to mount and adjust a cartridge, please follow the user manual of the

manufacturer.

8.)

The following nal adjustment is very important:

Please ensure that your turntable rack is in a levelled position.

Please check with the delivered level gauge, if your

Innovation Compact

turntable is in a levelled

position.

You can adjust each of the turntables feet to get the turntable levelled (Pic. 9).

To adjust the height, rst turn the middle part of the feet (Pic. 10 a; green arrow), then you can

twist the end part (Pic. 10 b, red frame) to the desired height.

After the adjustment, please make sure, to turn the middle part again to x the selected position.

Pic. 9: Alignment of the

turntable

9.)

Please connect the plug of the power supply with the linkage of the turntable.

After that connect the power supply with the electric power supply.

Only if the turntable is in a levelled position you will get the best results with your

Innovation

Compact

turntable.

Pic. 10 a: Middle part Pic. 10 b: End part

Pic. 11: Connection of power supply and motor

10.)

Place the at belt around the platter and around the

motor pulley.

By pushing the sensor-switch, marked with “33 1/3”

on the motor, the turntable starts to spin until 33 1/3

rpm is reached.

After the initial setup we recommend to let the turnta-

ble spin for at least 15 to 30 minutes.

This ensures a smoother break in.

User manual

10 © clearaudio electronic GmbH, 2017/11

Andere Handbücher für Innovation Compact

Inhaltsverzeichnis

Andere Clearaudio Drehscheibe Handbücher

Clearaudio

Clearaudio Peerformance Bedienungsanleitung

Clearaudio

Clearaudio Double Matrix Professional Bedienungsanleitung

Clearaudio

Clearaudio Maximum Solution Bedienungsanleitung

Clearaudio

Clearaudio Master Innovation Bedienungsanleitung

Clearaudio

Clearaudio Concept Bedienungsanleitung

Clearaudio

Clearaudio Unify Series Bedienungsanleitung

Clearaudio

Clearaudio Ovation Bedienungsanleitung

Clearaudio

Clearaudio Performance DC Bedienungsanleitung

Clearaudio

Clearaudio Concept MC Technisches Handbuch

Clearaudio

Clearaudio Avantgarde Magnum Bedienungsanleitung

Clearaudio

Clearaudio Emotion Bedienungsanleitung

Clearaudio

Clearaudio Innovation Compact Bedienungsanleitung

Clearaudio

Clearaudio Moving Coil V2 Bedienungsanleitung

Clearaudio

Clearaudio Ovation Bedienungsanleitung

Clearaudio

Clearaudio Double Matrix Professional SONI C Bedienungsanleitung

Clearaudio

Clearaudio Ovation Bedienungsanleitung

Clearaudio

Clearaudio Smart matrix professional Bedienungsanleitung

Clearaudio

Clearaudio Charisma V2 MM Bedienungsanleitung

Clearaudio

Clearaudio Satisfy Bedienungsanleitung

Clearaudio

Clearaudio Smart Matrix Bedienungsanleitung

Clearaudio

Clearaudio Innovation Compact Bedienungsanleitung

Clearaudio

Clearaudio Turbo Weight Bedienungsanleitung

Clearaudio

Clearaudio Ovation Bedienungsanleitung

Clearaudio

Clearaudio Unify Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken

Gemini

Gemini CDT-05 MKII Bedienungsanleitung

Rotel

Rotel RP-820 Bedienungsanleitung

Shuman

Shuman MC-250BT Bedienungsanleitung

Stanton

Stanton STR8-150 Bedienungsanleitung

Audio Technica

Audio Technica AT-LPW40WN Bedienungsanleitung

Crosley

Crosley McQueen CR7011-GY Bedienungsanleitung

Reloop

Reloop SMP-1 Bedienungsanleitung

auna

auna TT-Classic Plus Bedienungsanleitung

COMO AUDIO

COMO AUDIO Turntable Analog Bedienungsanleitung

Dual

Dual 1009 F Bedienungsanleitung

REED

REED Muse3C Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883-H Series Bedienungsanleitung

Pioneer

Pioneer PL-71 Bedienungsanleitung

Vestax

Vestax PDX-a1 Bedienungsanleitung

Denon

Denon DP-400 Bedienungsanleitung

Dual

Dual 504 Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT Bedienungsanleitung

Goldring

Goldring G99 Bedienungsanleitung