Clearaudio Ovation Bedienungsanleitung

Ovation

clearaudio electronic®GmbH

Spardorfer Str. 150 • D-91054 Erlangen • Tel. +49 9131 40300100 • FAX + 49 9131 40300119

www.clearaudio.de • www.analogshop.de • info@clearaudio.de

Version: 2.3_19.08.2016_E

User manual

Made in Germany

Silver with natural wood chassis

Black with black chassis

Dear Clearaudio customer,

You have purchased a State-Of-The-Art turntable, the

Ovation

, a world class product of Clearaudio

electronic GmbH.

Congratulations on your purchase!

With the

Ovation

turntable, Clearaudio made use of the OSC (Optical-Speed-Control) technology found

in the

Innovation

turntables series by implanting it into a precision milled Panzerholz (bullet proof wood)

chassis. This chassis is combined with an anti-resonance mat that is capable of absorbing a huge amount

of energy. This is due to the use of more than 100,000 small stainless steel balls which absorb unwanted

resonance.

Thus, the turntable combines the latest technology and innovation in a classic design, at a perfect price/

performance ratio.

Please read this user manual carefully so that you can enjoy all the advantages of your

Ovation

turntable. All information given will help to generate the best performance and avoid any possible

damages.

We hope you will enjoy your new Clearaudio

Ovation

turntable.

Clearaudio electronic GmbH

Please read the warnings before connecting your

Ovation

turntable to the mains supply.

Ovation

User manual

WARNINGS

Don’t expose your turntable to rain or humidity.

Don’t handle the mains leads with wet hands.

Don’t place or insert anything into the equipment or through ventilation holes.

No naked ame sources, such as lighted candles, should be placed on the equipment.

CE-MARKING

Recording und reproduction of any sound-material may require the consent of the creator.

Please acknowledge the information given in the

- Copyright Act 1956,

- Dramatic and Musical Performers Act 1958,

- Performers Protection Acts 1963 and 1972,

- Any more recent legal regulations.

Page 2 © clearaudio electronic GmbH 2016

The Clearaudio

Ovation

meets the regulations concerning electromagnetic disturbance (EMC)

and low-voltage appliances.

User manual 1 - 15

Contents

1. Packaging overview 4

2. Set-up and operation 5 - 12

3. Special notes 13

4. Technical data 14

Warranty information 15

Page 3 © clearaudio electronic GmbH 2016

Ovation

User manual

1. Packaging overview

The Clearaudio

Ovation

turntable is delivered in specially designed custom packaging.

Please check the contents according to the following list before you set up your new Clearaudio

Ovation

turntable.

Page 4 © clearaudio electronic GmbH 2016

Pic. 1: Packaging overview

Ovation

User manual

1. Layer (top):

Top of bearing, belt,

ttings and accessories

(Quality and warranty card,

bearing oil)

If ordered as set:

tonearm and/or cartridge

2. Layer (middle):

Turntable chassis

3. Layer (bottom):

Platter,

aluminum sub-platter

IMPORTANT NOTICE:

Please double check the tightness of all bolts and armboard mounting hardware, as temperature

uctuations during transit may have caused the hardware to become loose.

2. Setup and operation

The

Ovation

turntable consists of several components, as described in No 1 (Packaging overview).

The setup is easy, as some of the components are pre-assembled at the factory.

Please make use of the white gloves enclosed in order to avoid scratches or unwanted ngerprints

(e.g. on the platter).

Please follow the instructions step by step:

The

Ovation

requires a space of at least 16.54 inch x 13.78 inch for positioning.

Page 5 © clearaudio electronic GmbH 2016

Ovation

User manual

16.54 inch

/ 420 mm

13.78 inch / 350 mm

Pic. 2: Setup space

2.1

Place the pre-mounted chassis on your hi-rack or another suitable surface.

Page 6 © clearaudio electronic GmbH 2016

Ovation

User manual

Pic. 3: Placing the

Ovation

on the Flat Pads

2.2

To avoid hum noises it can be necessary to ground the bearing. For that please plug in the provided ground

cable into the hole of the screw from the bearing at the bottom side of the turntable and connect the other

end with your amplier.

Pic. 4: Grounding the bearing of the

Ovation

2.3

Please remove the protective seal from the bearing shaft and place two drops of the synthetic bearing oil

(Art. No. AC068 available through www.analogshop.de), on the ceramic bearing shaft. Slip the bearing top

onto the bearing shaft of the turntable.

Pic. 5: Bearing oil

Page 7 © clearaudio electronic GmbH 2016

Ovation

User manual

2.4

Now you can set the bearing upper part carefully onto the bearing.

To avoid damages make sure you slide the bearing upper part slowly and carefully on the polished ceramic

shaft.

Pic. 6: Fitting the bearing upper part

2.5

Now you can set the sub-platter carefully onto the bearing.

First remove the security mat on the backside of the sub-platter (security tape for OSC - graduated collar

(Optical Speed Control)).

To avoid any damage, make sure you slide the sub-platter slowly and carefully onto the bearing.

After that, take the included belt and place it around the motor and the sub-platter.

At this point the sub-platter will be higher than the pulley. This is normal, as the CMB requires the weight

of the platter to fully engage it.

Pic. 7: Setting the sub-platter Pic. 7.1: Placing the belt

Page 8 © clearaudio electronic GmbH 2016

2.6

Now you can set the platter carefully onto the bearing. To avoid damage, make sure you slide the platter

slowly and cautiously on the sub-platter/ bearing assembly. Hold the platter securely, so the platter does

not slip or fall on your turntable.

Ovation

User manual

Pic. 8: Setting the platter onto the bearing

2.7

Please check with the bubble level gauge, if your

Ovation

turntable is in a level position.

You can adjust each of the turntable’s feet to get the turntable

level.

Only if the turntable is in a level position will you get the best

results with your turntable.

Adjust the height be turning the threaded spike feet.

When the table is properly level, lock the feet in place with the nut

(see below).

Please note:

Through turning the feets clockwise you will raise the turntable,

by turning counter clockwise the turntable will lower.

Pic. 9: Adjustment of level

Pic. 9.1: Adjustment of the height

Page 9 © clearaudio electronic GmbH 2016

Ovation

User manual

2.8

For tonearm and cartridge mounting please refer to the user manual of the respective manufacturer.

Now you can connect the

Ovation

turntable with the main supply.

Position of the screw

to fasten the tonearm

with 2 mm allen key

Boring for the

tonearm feet

1. Insert carefully rst the cable and then the tonearm feet through the hole of the tonearm base.

2. Now adjust the tonearm height.

3. At the end secure the tonearm with the screws with are already integrated at the front of the

mounting base.

4. For tonearm and cartridge mounting please refer to the user manual of the respective manufacturer.

Pic. 10: Rear view Clarify tonearm

Page 10 © clearaudio electronic GmbH 2016

Ovation

User manual

If you purchased the Clearaudio

Ovation

as package with tonearm and cartridge, you received also a

Smart Stlyus Gauge as accessories, which allows you to adjust the tracking force of the cartridge.

Pic. 11: Use of the Smart Stylus Gauge

✓



tracking force too high! /

Auagekraft zu hoch!



tracking force too low! /

Auagekraft zu niedrig!

Diese Position der Nadel entspricht

einer Auagekraft von 20 mN (2,0g).

This position of the diamond correlates

to a tracking force of 20 mN (2.0g).

Andere Handbücher für Ovation

Inhaltsverzeichnis

Andere Clearaudio Drehscheibe Handbücher

Clearaudio

Clearaudio Smart Matrix Bedienungsanleitung

Clearaudio

Clearaudio Satisfy Bedienungsanleitung

Clearaudio

Clearaudio concept Signature Bedienungsanleitung

Clearaudio

Clearaudio Statement V2 Bedienungsanleitung

Clearaudio

Clearaudio Master Innovation Black Bedienungsanleitung

Clearaudio

Clearaudio Emotion SE Bedienungsanleitung

Clearaudio

Clearaudio Ovation Bedienungsanleitung

Clearaudio

Clearaudio Innovation Compact Bedienungsanleitung

Clearaudio

Clearaudio Innovation Compact Bedienungsanleitung

Clearaudio

Clearaudio Magnify Bedienungsanleitung

Clearaudio

Clearaudio AC039 Bedienungsanleitung

Clearaudio

Clearaudio Emotion SE Bedienungsanleitung

Clearaudio

Clearaudio Universal Bedienungsanleitung

Clearaudio

Clearaudio Master Innovation Bedienungsanleitung

Clearaudio

Clearaudio Emotion SE Bedienungsanleitung

Clearaudio

Clearaudio Concept Bedienungsanleitung

Clearaudio

Clearaudio Performance DC Bedienungsanleitung

Clearaudio

Clearaudio Avantgarde Magnum Bedienungsanleitung

Clearaudio

Clearaudio smart matrix SILENT Bedienungsanleitung

Clearaudio

Clearaudio TT1 MI Bedienungsanleitung

Clearaudio

Clearaudio Ovation Bedienungsanleitung

Clearaudio

Clearaudio Unify Series Bedienungsanleitung

Clearaudio

Clearaudio Innovation Compact Bedienungsanleitung

Clearaudio

Clearaudio Pulley extractor device Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken

Gemini

Gemini CDT-05 MKII Bedienungsanleitung

Rotel

Rotel RP-820 Bedienungsanleitung

Shuman

Shuman MC-250BT Bedienungsanleitung

Stanton

Stanton STR8-150 Bedienungsanleitung

Audio Technica

Audio Technica AT-LPW40WN Bedienungsanleitung

Crosley

Crosley McQueen CR7011-GY Bedienungsanleitung

auna

auna TT-Classic Plus Bedienungsanleitung

COMO AUDIO

COMO AUDIO Turntable Analog Bedienungsanleitung

Dual

Dual 1009 F Bedienungsanleitung

REED

REED Muse3C Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883-H Series Bedienungsanleitung

Pioneer

Pioneer PL-71 Bedienungsanleitung

Vestax

Vestax PDX-a1 Bedienungsanleitung

Denon

Denon DP-400 Bedienungsanleitung

Dual

Dual 504 Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT Bedienungsanleitung

Goldring

Goldring G99 Bedienungsanleitung

Acoustic Signature

Acoustic Signature Typhoon NEO Bedienungsanleitung