Clearaudio Innovation Wood Bedienungsanleitung

Innovation

Clearaudio electronic®GmbH

Spardorfer Str. 150 • D-91054 Erlangen • Tel. +49 9131 40300100 • FAX + 49 9131 40300119

www.clearaudio.de • www.analogshop.de • info@clearaudio.de

Version: 2.5_13.10.2016_E

User manual

Made in Germany

Innovation

Innovation Wood

Picture: Package with

Clearaudio tonearm „TT3“

and Clearaudio cartridge

„Titanium V2 “.

Picture: Package with

Clearaudio tonearm

„Universal“ and Clearaudio

cartridge „da Vinci V2 “.

Dear Clearaudio customer,

Congratulation’s to your choice of the

Innovation / Innovation Wood

(in the following:

Innovation

named)

turntable, a world class turntable, handmade in Germany by Clearaudio electronic GmbH.

Resonance minimizing chassis construction in a sandwich in combination with the innovative motor unit

(low noise level and high turning moments), guarantees total isolation of resonances from the turntable

chassis, providing the best music reproduction and authentic High End imaging. A high precision,

maintenance free sinter bronze bearing is completing the analogue pleasure.

The Clearaudio patented CMB-Bearing-Technology, an inverted bearing with jewelled and polished

ceramic bearing shaft and a bronzed liner, provides frictionless analog enjoyment.

Please read this instruction manual carefully, to avoid any damages or loss of warranty.

This manual will help you for an easy setup and guarantees the highest pleasure for a long time.

We wish you a lot of musical enjoyments with your new Clearaudio

Innovation

turntable.

Clearaudio electronic GmbH

This section must be read before any connection is made to the mains supply.

Innovation

User manual

WARNINGS

Don’t expose your turntable to rain or humidity.

Don’t handle the mains leads with wet hands.

Don’t place or insert anything into the equipment or through ventilation holes.

No naked ame sources, such as lighted candles, should be placed on the equipment.

CE-MARKING

EQUIPMENT MAINS WORKING SETTING

Your Clearaudio product has been prepared to comply with the household power and safety requirements

that exist in your area. This product can be connected to 230 V or 110 V AC (50 Hz and 60 Hz).

Recording und reproduction of any sound-material may require the consent of the creator. Please acknow-

ledge the information given in the

- Copyright Act 1956,

- Dramatic and Musical Performers Act 1958,

- Performers Protection Acts 1963 and 1972,

- Any more recent legal regulations.

Page 2 © Clearaudio electronic GmbH 2016

The Clearaudio

Innovation

meets the regulations concerning electromagnetic disturbance

(EMC) and low-voltage appliances.

Contents

1. Packing overview 4

2. List of components 5 - 6

3. Installation and setup 7 - 12

4. Fine adjustment of the motor 13

5. Service and special instruction 14

6. Technical data 15

Warranty information 16

Stroboscope Testrecord user manual 17 -18

Page 3© Clearaudio electronic GmbH 2016

Innovation

User manual

1. Packing overview

Page 4 © Clearaudio electronic GmbH 2016

Pic. 1: Packing overview

Accessories,

user manual,

warranty card,

Clearaudio Quality

Card,

Stroboscope Testrecord

Innovation

turntable chassis incl.

mounted lower bearing

part and integrated

motor unit;

optional: Tonearm

Stainless steel-sub-

platter; Delrin or Acrylic

platter;

power supply;

upper bearing part and

– cap

optional: Cartridge

Innovation

User manual

2. List of components

Clearaudio has developed a special and secure packing for your

Innovation

turntable that ensures a safe

transportation.

Please keep this original packing, if you need to ship the turntable.

Below you nd the part list of the Clearaudio

Innovation

turntable:

Page 5© Clearaudio electronic GmbH 2016

Pic. 2: List of components

123

7a 7b

1. Turntable body with mounted lower

bearing part 5. Bearing part

2. Stainless steel sub-platter 6. 3 x Flat Pads

3. Delrin or Acrylic (Wood version)

turntable platter 7. Optional: Clearaudio

Universal

(7 a) or

Magnify

(7 b) tonearm with counterweight to

adjust the tracking force

4. Power supply 8. Mounting clip for stainless steel sub-platter and

hex key

Pic. 7b: Clearaudio

Magnify

tonearm

Pic. 7a: Clearaudio

Universal

tonearm

Innovation

User manual

Continuation of components list

Page 6 © Clearaudio electronic GmbH 2016

910 11

12 13 14

15 16 a 17

9. 1 Pair of white gloves 15. Bearing oil for occasional use

10. Grounding - wire for the Innovation

turntable (to connect in the bottom

bearing part) 16 a

16 b

Optional in package:

Clearaudio MC cartridge

da Vinci

Clearaudio MC cartridge

Talismann

Clearaudio

Smart Stylus Gauge

11. Level gauge for the turntable

alignment

17. Clearaudio

Stroboscope Testrecord

(Art. No. AC038) to adjust the exact speed

12. 1 pcs. at belt 18. Optional in package:

Turntable + tonearm + cartridge

No illustration:

Cartridge alignment gauge

for

Unify

Universal

tonearm (optional)

13. 4 pcs. hex wrench; sizes: #1,5; #

2,5; #3; #7

19. Not shown: warranty card, Clearaudio Quality

Card, Sales return paper

14. Screw driver 17. Not shown: User Manual

Pic. 2.1: List of components

IMPORTANT NOTICE:

Please double check the tightness of all bolts, hardware, and mounting pods, as temperature uctuations

during transit may have caused the hardware to become loose.

16 b

Innovation

User manual

Page 7© Clearaudio electronic GmbH 2016

3. Installation and setup

The setup of the

Innovation

turntable is easy as the turntable chassis is pre-assembled and has been

tested at the factory.

Please use the white gloves enclosed in order to avoid scratches or unwanted ngerprints (platter).

The

Innovation

turntable requires a space for setup of at least 18.90 inch x 19.29 inch.

18.90 inch

/ 480 mm

19.29 inch / 490 mm

Pic. 3: Required set - up space

Innovation

User manual

Page 8 © Clearaudio electronic GmbH 2016

Please follow the description step by step:

1.)

First take out the three black at pads out of the accessory bag.

Place these at pads on your hi-rack or another suitable base, where the nal position of your

Innovation

turntable will be.

2.)

After that, take the Innovation turntable body of the next packing layer and place the spikes of the

turntable on the at pads.

Pic. 4:

Innovation

with tonearm base

Pic. 6: Oiling the bearing shaft

3.)

To avoid hum noises it can be necessary to ground the bearing. For that please plug in the provided ground

cable into the hole of the screw from the bearing at the bottom side of the turntable.

Pic. 5: Grounding the bearing of the

Innovation

4.)

Remove the protective security tape from the bearing housing.

Place two drops of the synthetic bearing oil on the ceramic bearing shaft.

(also available at www.analogshop.de, Art. No. AC068)

Innovation

User manual

Page 9

5.)

Take the stainless steel platter with both hands carefully out of the box.

Remove the lamination of the scale ring on the lower side of the turntable.

Please remove the lamination extreme carefully and avoid any soiling and scratches.

Push the delivered bearing part carefully through the hole in the stainless steel sub-platter and mount the

bearing part with the sub-platter by using the mounting clip.

6.)

In the next step remove the lamination of the sensor, mounted on the turntable chassis (picture 6: red

frame).

Please remove the lamination extreme carefully and avoid any soiling and scratches.

Pic. 7: Connection sub-platter and bearing upper part

Pic. 8: Removing the lamination

7.)

With both hands you can place the stainless steel platter

carefully onto the bearing.

Through a lightly (!!) up and down movement the platter will

slip onto the bearing upper part (picture 8).

Make sure with gentle pressure that the platter is applying on

the complete surface of the bearing.

Avoid major side forces to avoid any damages to the

ceramic bearing!

Pic. 9: Setup stainless steel platter with

upper bearing part

Innovation

User manual

Page 10 © Clearaudio electronic GmbH 2016

8.)

Now you can remove the mounting clip with the delivered hex wrench.

9.)

Take the Delrin platter with both hands out of the box and set

the platter carefully onto the bearing.

The at side of the platter should face to the stainless steel

platter and the side with the cut-out (for the record) should

face up.

To avoid any damages on your bearing, the Delrin platter

should have room temperature before the setup begins

(approx. 20 ° Celsius).

Avoid major side forces to avoid any damages to the

ceramic bearing!

Pic. 10: Removing of the mounting clip

Pic. 11: Setup Delrin platter and bearing cap

You will nd suitable adjustment equipment under www.clearaudio.de or www.analogshop.de.

10.)

To install the tonearm, please follow the user manual of the manufacturer.

Innovation

User manual

Andere Handbücher für Innovation Wood

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clearaudio Drehscheibe Handbücher

Clearaudio

Clearaudio Smart Matrix Bedienungsanleitung

Clearaudio

Clearaudio TT3 Bedienungsanleitung

Clearaudio

Clearaudio Swing base Bedienungsanleitung

Clearaudio

Clearaudio concept V2 Bedienungsanleitung

Clearaudio

Clearaudio Innovation Wood Bedienungsanleitung

Clearaudio

Clearaudio Double Matrix Professional SONI C Bedienungsanleitung

Clearaudio

Clearaudio Jubilee MM Bedienungsanleitung

Clearaudio

Clearaudio smart matrix SILENT Bedienungsanleitung

Clearaudio

Clearaudio Double Matrix Professional Bedienungsanleitung

Clearaudio

Clearaudio Performance SE Bedienungsanleitung

Clearaudio

Clearaudio Reference Jubilee Bedienungsanleitung

Clearaudio

Clearaudio Performance DC Bedienungsanleitung

Clearaudio

Clearaudio Performance DC Bedienungsanleitung

Clearaudio

Clearaudio Verify Bedienungsanleitung

Clearaudio

Clearaudio Melody V2 Bedienungsanleitung

Clearaudio

Clearaudio concept Signature Bedienungsanleitung

Clearaudio

Clearaudio Ovation Bedienungsanleitung

Clearaudio

Clearaudio Emotion SE Bedienungsanleitung

Clearaudio

Clearaudio Charisma V2 MM Bedienungsanleitung

Clearaudio

Clearaudio Master Innovation Bedienungsanleitung

Clearaudio

Clearaudio Pulley extractor device Bedienungsanleitung

Clearaudio

Clearaudio Perfomance SE Bedienungsanleitung

Clearaudio

Clearaudio Bluemotion & Satisfy Bedienungsanleitung

Clearaudio

Clearaudio Turbo Weight Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken

Gemini

Gemini CDT-05 MKII Bedienungsanleitung

Rotel

Rotel RP-820 Bedienungsanleitung

Shuman

Shuman MC-250BT Bedienungsanleitung

Stanton

Stanton STR8-150 Bedienungsanleitung

Audio Technica

Audio Technica AT-LPW40WN Bedienungsanleitung

Crosley

Crosley McQueen CR7011-GY Bedienungsanleitung

auna

auna TT-Classic Plus Bedienungsanleitung

COMO AUDIO

COMO AUDIO Turntable Analog Bedienungsanleitung

Dual

Dual 1009 F Bedienungsanleitung

REED

REED Muse3C Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883-H Series Bedienungsanleitung

Pioneer

Pioneer PL-71 Bedienungsanleitung

Vestax

Vestax PDX-a1 Bedienungsanleitung

Denon

Denon DP-400 Bedienungsanleitung

Dual

Dual 504 Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT Bedienungsanleitung

Goldring

Goldring G99 Bedienungsanleitung

Acoustic Signature

Acoustic Signature Typhoon NEO Bedienungsanleitung